6,640 resources related to Virtual manufacturing
- Topics related to Virtual manufacturing
- IEEE Organizations related to Virtual manufacturing
- Conferences related to Virtual manufacturing
- Periodicals related to Virtual manufacturing
- Most published Xplore authors for Virtual manufacturing
APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics
The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.
The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.
All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation
The scope of the 2020 IEEE/ASME AIM includes the following topics: Actuators, Automotive Systems, Bioengineering, Data Storage Systems, Electronic Packaging, Fault Diagnosis, Human-Machine Interfaces, Industry Applications, Information Technology, Intelligent Systems, Machine Vision, Manufacturing, Micro-Electro-Mechanical Systems, Micro/Nano Technology, Modeling and Design, System Identification and Adaptive Control, Motion Control, Vibration and Noise Control, Neural and Fuzzy Control, Opto-Electronic Systems, Optomechatronics, Prototyping, Real-Time and Hardware-in-the-Loop Simulation, Robotics, Sensors, System Integration, Transportation Systems, Smart Materials and Structures, Energy Harvesting and other frontier fields.
The IEEE Transactions on Advanced Packaging has its focus on the modeling, design, and analysis of advanced electronic, photonic, sensors, and MEMS packaging.
Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.
Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission
The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...
The IEEE Transactions on Automation Sciences and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. We welcome results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, ...
IEEE Power Engineering Review, 1991
Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation, 1992
Summary from only given, as follows. A complete modelling of a grounding system made by ground meshes, connected or not in multilayer soil is presented. A 3D approach is used to model rods or wire conductors, grave layers and conductor plates that are commonly found in grounding systems. This methodology uses an original shape function to model the stratified soil ...
IEEE Transactions on Industrial Electronics, 1987
Internet of Things Challenges, 09/29/2016
This module introduces interdisciplinary topics in IoT, presenting challenges that span from technological ones to business and social issues. The IoT sector is strongly influenced by the relationships between technological development, business opportunities, with new business models emerging, and social implications. This module also offers a view on the ability to create a virtual continuum between physical and virtual objects, ...
IEEE Power Engineering Review, 1991
Virtual World Symposium - Virtual World at Intel
Virtual World Symposium - Educational Work
Virtual World Symposium - Moon World
Virtual World Symposium - Second Life Tech Tour
Virtual World Symposium - Welcome Address
Virtual World Symposium - IEEE Islands
Virtual World Symposium 2011 - Collaborative Work
Jim Davis on Deploying IoT in Manufacturing and Supply Chains - WF-IoT 2015
IMS 2011 Microapps - Volume Manufacturing Trends for Automotive Radar Devices
Reconstructed Brain Models for Virtual Bodies and Robots
Virtual World Symposium 2011 - CoLab and Mars
Virtual World Symposium - Project Direct
Dr. Bernd Kosch on Industrie 4.0 and manufacturing - WF-IoT 2015
IMS 2012 Microapps - Virtual Flight Testing of Radar System Performance Daren McClearnon, Agilent EEsof
Is the Future of Humanity Bionic? - IEEE TechEthics Virtual Panel
Virtual World Symposium - SciLands
IEEE Cloud Computing for Emerging Markets: Buyya
EMBC 2011-Course-Virtual Reality and Robotics in Neurorehabilitation-William Zev Rymer
EMBC 2011-Course-Virtual Reality and Robotics in Neurorehabilitation-Susan Fasoli
Summary from only given, as follows. A complete modelling of a grounding system made by ground meshes, connected or not in multilayer soil is presented. A 3D approach is used to model rods or wire conductors, grave layers and conductor plates that are commonly found in grounding systems. This methodology uses an original shape function to model the stratified soil and is applied to the analysis of a practical case. The computation of ground resistance is done by power loss considerations.
Internet of Things Challenges
This module introduces interdisciplinary topics in IoT, presenting challenges that span from technological ones to business and social issues. The IoT sector is strongly influenced by the relationships between technological development, business opportunities, with new business models emerging, and social implications. This module also offers a view on the ability to create a virtual continuum between physical and virtual objects, and introduces a set of possible use cases and application scenarios.
A model for evaluating progress in factory automation is outlined. Operational characteristics in the 1980s factory are described. Characteristics of the 1990s factory are then examined at five levels: servo, path generation, distributed CPU, supervisory and enterprise.<>
The more complex a development effort, the more difficult it is to reduce or control the project's schedule and cost. The use of concurrent engineering in the development cycle only exacerbates the problem by increasing the number of departments and people involved at any point in the development effort. Breakdowns in the process can have devastating effects on the project schedule and double or even triple the development cost. Here, the author describes how these project elements can be effectively controlled using proven project management techniques. A number of companies involved in complex development efforts have been able to greatly reduce both development time and cost by applying these techniques.
The phenomenon that the state of software degrades with time is known as software aging. The primary method to fight aging is software rejuvenation. This paper presents new ways of effective software rejuvenation using virtualization for addressing software aging. This new approach is meant to be the less disruptive as possible for the running service and to get a zero downtime in most of the cases. We construct the state transition models to describe the behaviors of virtualized and non- virtualized application server. We map through the rejuvenation actions to this transition model with stochastic process and express availability, downtime and downtime costs in terms of the parameters in our models. Our results show that virtualization and software rejuvenation can be used to prolong the availability of the services.
While well-proved shape description methods are available in present day CAD/CAM systems modeling of design intent is a rather new area. The authors have investigated modeling of complex considerations that are behind the decisions of engineers on model data in the course of product modeling. A product modeling system is considered that involves humans, model creating procedures and model data processing procedures. The proposed intent description can be utilized in present and future applications and later modification or re-engineering of models. Modeling of design intent is considered as part of the virtual manufacturing where integration of conceptualization activities is emphasized. In this paper, the problem and the analyzed human-machine-human system are outlined. Then characteristics and content of the design intent are described. Following this, representation of design intent and attaching intent data to product models are detailed. Finally, possibilities for application of the results of the research in CAD/CAM modeling environments are concluded.
A product information model based on STEP, which mainly contains five parts such as general information model, structure information model, shape description model, physical feature model and management information model, has been studied. Its description method and exchange mode of neutral file are also researched. The model has the features of integrality, consistency, variety, flexibility and neutral mechanism. When used into the application instance of integration between CAD and PDM system, it has been proved that the model and neutral mechanism can help to implement integration of generalized CAD systems.
No standards are currently tagged "Virtual manufacturing"