Conferences related to Vents

Back to Top

Oceans 2020 MTS/IEEE GULF COAST

To promote awareness, understanding, advancement and application of ocean engineering and marine technology. This includes all aspects of science, engineering, and technology that address research, development, and operations pertaining to all bodies of water. This includes the creation of new capabilities and technologies from concept design through prototypes, testing, and operational systems to sense, explore, understand, develop, use, and responsibly manage natural resources.

  • OCEANS '96

  • OCEANS '97

  • OCEANS '98

  • OCEANS '99

  • OCEANS 2000

  • OCEANS 2001

  • OCEANS 2002

  • OCEANS 2003

  • OCEANS 2004

  • OCEANS 2005

  • OCEANS 2006

  • OCEANS 2007

  • OCEANS 2008

    The Marine Technology Society (MTS) and the Oceanic Engineering Society (OES) of the Institute of Electrical and Electronic Engineers (IEEE) cosponsor a joint conference and exposition on ocean science, engineering, education, and policy. Held annually in the fall, it has become a focal point for the ocean and marine community to meet, learn, and exhibit products and services. The conference includes technical sessions, workshops, student poster sessions, job fairs, tutorials and a large exhibit.

  • OCEANS 2009

  • OCEANS 2010

    The Marine Technology Society and the Oceanic Engineering Scociety of the IEEE cosponsor a joint annual conference and exposition on ocean science engineering, and policy.

  • OCEANS 2011

    The Marine Technology Society and the Oceanic Engineering Scociety of the IEEE cosponsor a joint annual conference and exposition on ocean science engineering, and policy.

  • OCEANS 2012

    Ocean related technology. Tutorials and three days of technical sessions and exhibits. 8-12 parallel technical tracks.

  • OCEANS 2013

    Three days of 8-10 tracks of technical sessions (400-450 papers) and concurent exhibition (150-250 exhibitors)

  • OCEANS 2014

    The OCEANS conference covers four days. One day for tutorials and three for approx. 450 technical papers and 150-200 exhibits.

  • OCEANS 2015

    The Marine Technology Scociety and the Oceanic Engineering Society of the IEEE cosponor a joint annual conference and exposition on ocean science, engineering, and policy. The OCEANS conference covers four days. One day for tutorials and three for approx. 450 technical papers and 150-200 exhibits.

  • OCEANS 2016

    The Marine Technology Scociety and the Oceanic Engineering Society of the IEEE cosponor a joint annual conference and exposition on ocean science, engineering, and policy. The OCEANS conference covers four days. One day for tutorials and three for approx. 500 technical papers and 150 -200 exhibits.

  • OCEANS 2017 - Anchorage

    Papers on ocean technology, exhibits from ocean equipment and service suppliers, student posters and student poster competition, tutorials on ocean technology, workshops and town meetings on policy and governmental process.

  • OCEANS 2018 MTS/IEEE Charleston

    Ocean, coastal, and atmospheric science and technology advances and applications


OCEANS 2020 - SINGAPORE

An OCEANS conference is a major forum for scientists, engineers, and end-users throughout the world to present and discuss the latest research results, ideas, developments, and applications in all areas of oceanic science and engineering. Each conference has a specific theme chosen by the conference technical program committee. All papers presented at the conference are subsequently archived in the IEEE Xplore online database. The OCEANS conference comprises a scientific program with oral and poster presentations, and a state of the art exhibition in the field of ocean engineering and marine technology. In addition, each conference can have tutorials, workshops, panel discussions, technical tours, awards ceremonies, receptions, and other professional and social activities.

  • OCEANS 2005 - EUROPE

  • OCEANS 2006 - ASIA PACIFIC

  • OCEANS 2007 - EUROPE

    The theme 'Marine Challenges: Coastline to Deep Sea' focuses on the significant challenges, from the shallowest waters around our coasts to the deepest subsea trenches, that face marine, subsea and oceanic engineers in their drive to understand the complexities of the world's oceans.

  • OCEANS 2008 - MTS/IEEE Kobe Techno-Ocean

  • OCEANS 2009 - EUROPE

  • OCEANS 2010 IEEE - Sydney

  • OCEANS 2011 - SPAIN

    All Oceans related technologies.

  • OCEANS 2012 - YEOSU

    The OCEANS conferences covers four days with tutorials, exhibits and three days of parallel tracks that address all aspects of oceanic engineering.

  • OCEANS 2013 - NORWAY

    Ocean related technologies. Program includes tutorials, three days of technical papers and a concurrent exhibition. Student poster competition.

  • OCEANS 2014 - TAIPEI

    The OCEANS conference covers all aspects of ocean engineering from physics aspects through development and operation of undersea vehicles and equipment.

  • OCEANS 2015 - Genova

    The Marine Technology Society and the Oceanic Engineering Society of IEEE cosponsor a joint annual conference and exposition on ocean science, engineering and policy. The OCEANS conference covers four days. One day for tutorials and three for approx. 450 technical papers and 50-200 exhibits.

  • OCEANS 2016 - Shanghai

    Papers on ocean technology, exhibits from ocean equipment and service suppliers, student posters and student poster competition, tutorial on ocean technology, workshops and town hall meetings on policy and governmental process.

  • OCEANS 2017 - Aberdeen

    Papers on ocean technology, exhibits from ocean equipment and service suppliers, student posters and student poster competition, tutorials on ocean technology, workshops and town hall meetings on policy and governmental process.

  • 2018 OCEANS - MTS/IEEE Kobe Techno-Ocean (OTO)

    The conference scope is to provide a thematic umbrella for researchers working in OCEAN engineering and related fields across the world to discuss the problems and potential long term solutions that concernnot only the oceans in Asian pacific region, but the world ocean in general.

  • OCEANS 2019 - Marseille

    Research, Development, and Operations pertaining to the Oceans


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2019 IEEE 28th Symposium on Fusion Engineering (SOFE)

fusion engineering, physics and materials, plasma heating, vacuum technology, tritium processing, fueling, first walls, blankets and divertors



Periodicals related to Vents

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Components and Packaging Technologies, IEEE Transactions on

Component parts, hybrid microelectronics, materials, packaging techniques, and manufacturing technology.



Most published Xplore authors for Vents

Back to Top

Xplore Articles related to Vents

Back to Top

Notes on oil circuit breakers for large powers and high potentials

Proceedings of the American Institute of Electrical Engineers, 1913

The paper gives a brief outline of some of the important developments in oil circuit breakers which have taken place within the last two or three years. Ideal conditions require that the current should not reestablish itself after passing the first zero value following the opening of the contacts, and this emphasizes the value of high opening speed in a ...


Protector-tube application and performance on 132-kv transmission lines — II

Electrical Engineering, 1938

THE USE of protector tubes (previously referred to as expulsion protective tubes or “deion” gaps) during the past five years or so as devices for protecting transmission lines and equipment against lightning has gained considerable headway, particularly in the protection of high-voltage transmission lines. A number of applications have been made in the medium voltage transmission field, a few in ...


Recent investigation of lightning protective apparatus

Proceedings of the American Institute of Electrical Engineers, 1906

Owing to the peculiar nature of lightning and similar disturbances, a variety of opinions continues to exist concerning their action and the usefulness of various devices for protecting against them. In this paper, an attempt is made to outline the most dominant characteristic of lightning as manifested on electric circuits and recent investigation as to what characteristics protective devices should ...


High energy, silver-zinc batteries for submersible applications

Proceedings of the 1987 5th International Symposium on Unmanned Untethered Submersible Technology, 1987

This paper outlines the advantages of using the traditional silver-zinc battery in the submersible business environment. The paper will explain how the silver-zinc battery's inherent high energy density and power density levels extend the range of performance, improve reliability and effectively reduce power cost.


Investigations on flow-sustained oscillations and aeroacoustic characterisitics induced by transonic and supersonic flow over open cavities

2009 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA 2009), 2009

This paper presents flow-sustained oscillations and aeroacoustic characteristics within open rectangular cavities with length to depth ratios of 6 and 8 by analyzing flow-field structures and fluctuating pressure measurement inside the cavities in a wind-tunnel test. The free-stream Mach numbers were 0.8 and 1.5. The results indicate that a vortex inside the cavities vents the high pressures ahead of the ...



Educational Resources on Vents

Back to Top

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Vents"

IEEE-USA E-Books

  • Notes on oil circuit breakers for large powers and high potentials

    The paper gives a brief outline of some of the important developments in oil circuit breakers which have taken place within the last two or three years. Ideal conditions require that the current should not reestablish itself after passing the first zero value following the opening of the contacts, and this emphasizes the value of high opening speed in a circuit breaker. Breakers have been designed in which resistances were introduced to limit the current to a value readily ruptured, but as this principle is difficult of accomplishment, reactance has been successfully substituted for resistance. Reactance breakers have two sets of contacts, the main set which carries the normal current, and an auxiliary set which carries the reduced current after the reactance has been introduced by the opening of the main contacts. Breakers for any power and voltage, with all the usual methods of operation are now available.

  • Protector-tube application and performance on 132-kv transmission lines — II

    THE USE of protector tubes (previously referred to as expulsion protective tubes or “deion” gaps) during the past five years or so as devices for protecting transmission lines and equipment against lightning has gained considerable headway, particularly in the protection of high-voltage transmission lines. A number of applications have been made in the medium voltage transmission field, a few in the low-voltage field, and a number of scattered installations for protection of equipment and cables.

  • Recent investigation of lightning protective apparatus

    Owing to the peculiar nature of lightning and similar disturbances, a variety of opinions continues to exist concerning their action and the usefulness of various devices for protecting against them. In this paper, an attempt is made to outline the most dominant characteristic of lightning as manifested on electric circuits and recent investigation as to what characteristics protective devices should possess and to what degree they have been found in practice to possess them.

  • High energy, silver-zinc batteries for submersible applications

    This paper outlines the advantages of using the traditional silver-zinc battery in the submersible business environment. The paper will explain how the silver-zinc battery's inherent high energy density and power density levels extend the range of performance, improve reliability and effectively reduce power cost.

  • Investigations on flow-sustained oscillations and aeroacoustic characterisitics induced by transonic and supersonic flow over open cavities

    This paper presents flow-sustained oscillations and aeroacoustic characteristics within open rectangular cavities with length to depth ratios of 6 and 8 by analyzing flow-field structures and fluctuating pressure measurement inside the cavities in a wind-tunnel test. The free-stream Mach numbers were 0.8 and 1.5. The results indicate that a vortex inside the cavities vents the high pressures ahead of the rear face and the low pressures downstream of the front face, which has little influence on the sound-wave feedback mechanism from the cavity rear face to the cavity front face. Therefore, the self-sustained flow oscillations and some peak frequencies occur inside the open cavity. The simulated flow self-sustained oscillation frequencies inside the open cavities with length to depth ratio of 8 agree with Rossiter's and Heller's predicated results, which indicate their frequency characteristics. The results present that intensive noise exists inside open cavities.

  • Collisions of resonantly coupled round beams at the Cornell electron-positron storage ring (CESR)

    As a first step toward testing the proposed "Mobius" scheme, we used existing CESR elements to collide round, rather than flat, beams. The tune shift parameter, /spl xi/, was inferred from the beam profiles and current, was compared to the tune shift of the coherent beam-beam /spl pi/ mode, and was corroborated by luminosity measurement. Values of /spl xi/ up to 0.09 were achieved without significant lifetime reduction.

  • Prevention of Catalyst Plug Deterioration in Lead-Acid Batteries

    Catalyst plugs, developed to obviate the need for adding water to the electrolyte in a battery, re-combine oxygen and hydrogen gases generated from the battery during float-charging to form water. This paper describes the deactivation mechanism for the catalyst (Pd-Al<inf>2</inf>O<inf>3</inf>) and the deactivation-prevention techniques. The analysis of catalyat plugs used for several years at telephone offices has revealed that the catalyst plugs fail due to adsorption of the water onto the catalyst, and that the catalytic reaction is interfered with by the water physisorbed on the catalyst surface. A method for covering the catalyst surface with hydrophobic film was studied. Results revealed that the method reduced the amount of water physisorbed on the catalyst to one-fiftieth that on untreated catalyst.

  • Polar autoregressive estimation: application to the study of radar images of the sea

    With the objective of using a radar transmitting in the X-band as an oceanographic instrument, it appears necessary to develop methods intended to retrieve the characteristics of a sea surface from the signal received by the radar. A fast method of processing of marine radar images is presented. It is proposed to use a three-dimensional parametric method taking account of the temporal distortion of the sea image introduced by reception of the radar signal as well as the polar form of the pixels of a radar image. Thanks to a series of polar autoregressive parameters and possibly others, it will be possible to retrieve the characteristics of the observed sea surface and to deduce the sea state.

  • Indium channel implant for improved short-channel behavior of submicrometer NMOSFETs

    Indium has been used as an alternative channel implant in submicrometer- channel Si MOSFETs in order to obtain highly nonuniform channel doping. Superior device characteristics have been obtained down to 0.17- mu m channel length. The device characteristics have been compared to those of uniform boron-implanted short-channel MOSFETs used in a 0.25- mu m CMOS technology. Results indicate that NMOSFETs with nonuniform channel doping obtained with indium have superior short-channel effect (SCE) when compared to NMOSFETs with uniformly (boron) doped channel.<<ETX>>

  • Development of a gas-tight serial sampler for seawater and hydrothermal fluids

    Chemical analysis of time-series vent fluid samples is needed to study the temporal changes in hydrothermal vent chemistry and surrounding biological communities. To meet this requirement, a gas-tight serial sampler was designed, constructed and tested. Based on the modular design principle, the serial sampler is currently composed of a control unit module and six sampling unit modules, which is convenient to be upgraded by adding more modules in future. Each sampling module consists of an independent sampling valve, a sample chamber and an accumulator. Compressed nitrogen gas is used to maintain the sample at in-situ pressure. The sampler is designed to be deployed 4000m under water. Laboratory experiment indicated a good sealing capability and pressure maintaining performance of each sampling module. In addition, the serial sampler was field tested during two sea trials, and gas-tight samples were successfully collected.



Standards related to Vents

Back to Top

IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications

As presently stated in IEEE Std 446-1987.


IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications

This recommended practice provides installation design, installation, maintenance and testing procedures, and test schedules that can be used to optimize the life and performance of vented nickel-cadmium batteries. It also provides guidance for determining when these batteries should be replaced. (Scope unchanged from previous version.)


IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems

This recommended practice describes a method for sizing both vented and valve-regulated lead-acid batteries in stand-alone PV systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice. Sizing batteries for hybrid and grid-connected PV systems is beyond the scope of this recommended practice. Recommended practices for the remainder ...


IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Photovoltaic (PV) Systems

This recommended practice describes methods for sizing nickel/cadmium batteries used with terrestrial photovoltaic (PV) systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than nickel/cadmium are beyond the scope of this document. Recommended practices for the remainder of the electric systems associated with PV installations are also beyond the scope of this document.


IEEE Standard Power Cable Ampacity Tables