Conferences related to Surface structures

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


2020 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI)

This symposium pertains to the field of electromagnetic compatibility.


More Conferences

Periodicals related to Surface structures

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Computer Architecture Letters

Rigorously peer-reviewed forum for publishing early, high-impact results in the areas of uni- and multiprocessors computer systems, computer architecture workload characterization, performance evaluation and simulation techniques, and power-aware computing


Computer Graphics and Applications, IEEE

IEEE Computer Graphics and Applications (CG&A) bridges the theory and practice of computer graphics. From specific algorithms to full system implementations, CG&A offers a strong combination of peer-reviewed feature articles and refereed departments, including news and product announcements. Special Applications sidebars relate research stories to commercial development. Cover stories focus on creative applications of the technology by an artist or ...


More Periodicals

Most published Xplore authors for Surface structures

Back to Top

Xplore Articles related to Surface structures

Back to Top

Interactive measurement of three-dimensional cardiac morphology

[1989] Proceedings. Computers in Cardiology, 1989

Techniques have been developed for extracting three-dimensional (3-D) measurements directly and interactively from 3-D representations of cine CT (computer tomography) images. In order for 3-D measurements to be obtained, the anatomical surface is interrogated directly through the use of a 3-D graphical 'probe' (line). The probe is interactively positioned and stretched between any visible surface points to allow direct capture ...


Wavelength selective uncooled infrared sensor using triangular-lattice plasmonic absorbers

2013 International Conference on Optical MEMS and Nanophotonics (OMN), 2013

A wavelength selective uncooled infrared (IR) sensor was developed using triangular-lattice plasmonic absorbers (PLA). The triangular-lattice PLA has a Au-based two-dimensional periodic dimple-array with a triangular lattice, where photons can be manipulated using the spoof surface plasmon. A microelectromechanical system (MEMS)-based uncooled IR sensor with triangular- lattice PLA was fabricated using complementary metal oxide semiconductor (CMOS) and micromachining techniques. Measurement ...


Spectral and thermal properties of tungsten selective emitters with rectangular microcavities for thermophotovoltaic generations

3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of, 2003

Spectral properties of 2D W surface gratings are investigated by numerical calculations based on rigorous coupled-wave analysis to obtain a good spectral selectivity enough to use as a selective emitter for thermophotovoltaic generations. To demonstrate the calculated results, a 2D grating with 1.0 /spl mu/m periodicity composed of rectangular microcavities is fabricated on a single crystalline W substrate by electron ...


Mag setic anisotropy of permalloy film on stepped Mo[001] surface

2000 IEEE International Magnetics Conference (INTERMAG), 2000

None


Antireflection and light trapping of periodic subwavelength surface structures formed by colloidal monolayer spheres lithography on thin film solar cells

CLEO/QELS: 2010 Laser Science to Photonic Applications, 2010

Solar cell efficiency enhancement by gradient periodic TiO<sub>2</sub> nanoislands formed with the facilitation of polystyrene-spheres was studied. The enhancement mechanism was categorized by antireflection and light-trapping and achieves 72% relative increase of short-circuit current density.


More Xplore Articles

Educational Resources on Surface structures

Back to Top

IEEE-USA E-Books

  • Interactive measurement of three-dimensional cardiac morphology

    Techniques have been developed for extracting three-dimensional (3-D) measurements directly and interactively from 3-D representations of cine CT (computer tomography) images. In order for 3-D measurements to be obtained, the anatomical surface is interrogated directly through the use of a 3-D graphical 'probe' (line). The probe is interactively positioned and stretched between any visible surface points to allow direct capture of 3-D (linear) distance. Distance measurements are updated in real time as the probe dynamically 'penetrates' any intervening anatomy while providing valuable depth cuing for visual feedback and probe placement. Curvilinear distance is obtained by stretching the probe over multiple surface points. The probe is implemented by a general z-buffer and is therefore applicable to a variety of 3-D imaging techniques.<<ETX>>

  • Wavelength selective uncooled infrared sensor using triangular-lattice plasmonic absorbers

    A wavelength selective uncooled infrared (IR) sensor was developed using triangular-lattice plasmonic absorbers (PLA). The triangular-lattice PLA has a Au-based two-dimensional periodic dimple-array with a triangular lattice, where photons can be manipulated using the spoof surface plasmon. A microelectromechanical system (MEMS)-based uncooled IR sensor with triangular- lattice PLA was fabricated using complementary metal oxide semiconductor (CMOS) and micromachining techniques. Measurement of the spectral responsivity demonstrated that selective enhancement of the responsivity can be achieved and that the detection wavelength of the triangular-lattice PLA was shorter than that of the square-lattice PLA due to the differences in lattice structure.

  • Spectral and thermal properties of tungsten selective emitters with rectangular microcavities for thermophotovoltaic generations

    Spectral properties of 2D W surface gratings are investigated by numerical calculations based on rigorous coupled-wave analysis to obtain a good spectral selectivity enough to use as a selective emitter for thermophotovoltaic generations. To demonstrate the calculated results, a 2D grating with 1.0 /spl mu/m periodicity composed of rectangular microcavities is fabricated on a single crystalline W substrate by electron beam lithography and fast atom beam etching techniques. This grating shows high emissivity in the NlR region corresponding to the spectral response of GaSb PV cells. It is also found that spectral emissivity of emitters is considerably dependent on temperature. A theoretical analysis is conducted to evaluate the temperature dependence of spectral emissivity of metallic microstructured selective emitters in the frame of the Drude theory.

  • Mag setic anisotropy of permalloy film on stepped Mo[001] surface

    None

  • Antireflection and light trapping of periodic subwavelength surface structures formed by colloidal monolayer spheres lithography on thin film solar cells

    Solar cell efficiency enhancement by gradient periodic TiO<sub>2</sub> nanoislands formed with the facilitation of polystyrene-spheres was studied. The enhancement mechanism was categorized by antireflection and light-trapping and achieves 72% relative increase of short-circuit current density.

  • Eddy current imaging of surface-breaking structures

    Restoration of image shape or connectivity has been achieved by using eddy current data taken with a recording head style probe. Examples are included showing results on an EDM slot much smaller than the probe gap area and on incised letters comparable to the gap in size. Details of the preprocessing and the Wiener filter used are described. Other, less computationally intensive, image processing for finding slot size is also discussed.

  • Controlled assembly of sliver nanocap arrays with tunable gaps for molecular sensing using SERS

    A convenient nanotechnique for fabrication of highly ordered hemispherical silver nanocap arrays templated by porous anodic alumina membranes as robust and cost-efficient surface-enhanced Raman scattering (SERS) substrates is reported. This geometry exhibits a high Raman signal due to periodically hexagonal arrangements and gap control between the nanostructures in the sub-10 nm regime. The surface structure can further be tuned to optimize the enhancement factor according to optional porous anodic alumina fabrication and silver deposition parameters.

  • Surface structure of photorefraction grating in crystals of sillinites class

    The surface properties of photorefraction crystals (PRC) within the appendices of a dynamic holography are of great interest. The availability of a nonuniformity of photorefraction grating in frontier area of PRC results both in quantitative, and qualitative features of modulation of optical properties of a crystal. In the paper the structure of photorefraction grating close to mechanically and electrically free border of crystals of the sillinites class with the applied external steady electrical field in steady-state conditions approaching the given distribution of photoexcited electrons in a conduction band is considered.

  • Excimer laser ablation of biomaterials: the contribution of water in collagen films

    We investigated the surface structure of the excimer laser ablation by the microphotoetching of dried and swelled collagen films using atomic force microscope (AFM) and scanning electron microscope (SEM) measurements. We characterized the roughness of the etched surface by topographical analysis. The thermal effect of the collagen was investigated from the changes in the amide I band of the debris by ATR method using FT-IR spectroscopy. Especially, we studied the time-resolved photographic relations inorder to determine the mechanism causing the difference in the excimer laser ablation between the swelled and the dried collagen films.

  • The structure and morphology of Si (111) surface at the initial stages of high temperature copper deposition

    Structural and morphological transformations of an atomically clean Si(111) surface at initial stages of copper deposition were studied by in situ ultrahighvacuum reflection electron microscopy. The monatomic steps motion in the step-down direction and the change of the electron microscopy contrast along atomic steps were observed during the submonolayer copper deposition onto the substrate at 850degC. It was shown that the change of the contrast was caused by the formation of Cu/Si(111)-(5times5) reconstruction domains and the shift of monatomic steps was provided by the incorporation of silicon adatoms been generated during the formation of the superstructure.



Standards related to Surface structures

Back to Top

(Replaced) IEEE Standard VHDL Language Reference Manual

his standard revises and enhances the VHDL language reference manual (LRM) by including a standard C language interface specification; specifications from previously separate, but related, standards IEEE Std 1164 -1993,1 IEEE Std 1076.2 -1996, and IEEE Std 1076.3-1997; and general language enhancements in the areas of design and verification of electronic systems.


IEEE Application Guide for Distributed Digital Control and Monitoring for Power Plants


IEEE Recommended Practice for System Identification in Nuclear Power Plants and Related Facilities


Standard for Utility Industry End Device Data Tables

To develop a standard for utility end device application layer communications protocol and the functional data structures which it transports. It is to allow operation of end devices for utility distribution and customer applications.



Jobs related to Surface structures

Back to Top