Conferences related to Surface resistance

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE International Electron Devices Meeting (IEDM)

the IEEE/IEDM has been the world's main forum for reporting breakthroughs in technology, design, manufacturing, physics and the modeling of semiconductors and other electronic devices. Topics range from deep submicron CMOS transistors and memories to novel displays and imagers, from compound semiconductor materials to nanotechnology devices and architectures, from micromachined devices to smart -power technologies, etc.


More Conferences

Periodicals related to Surface resistance

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


Components and Packaging Technologies, IEEE Transactions on

Component parts, hybrid microelectronics, materials, packaging techniques, and manufacturing technology.


Device and Materials Reliability, IEEE Transactions on

Provides leading edge information that is critical to the creation of reliable electronic devices and materials, and a focus for interdisciplinary communication in the state of the art of reliability of electronic devices, and the materials used in their manufacture. It focuses on the reliability of electronic, optical, and magnetic devices, and microsystems; the materials and processes used in the ...


More Periodicals

Most published Xplore authors for Surface resistance

Back to Top

Xplore Articles related to Surface resistance

Back to Top

Calculation of earth resistance for a deep-driven rod in a multi-layer earth structure

IEEE Power Engineering Review, 1991

None


Discussion on “the high efficiency suspension insula tor.” Chicago, June 30, 1911. (see proceedings for June, 1911)

Proceedings of the American Institute of Electrical Engineers, 1911

None


Low resistance, low-bias current PIN diodes

1976 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1976

Low resistance PIN diodes with R<inf>s</inf>below 0.2 ohm at 20 mA and a reverse bias capacitance below 1.1 pF at -20 V will be discussed.


Some problems in the standardization of temperature ratings of fractional-horsepower motors

Electrical Engineering, 1940

AT the winter convention of the AIEE in New York in January 1939, there, were presented a number of papers on temperature rating of electrical apparatus.1–6Since that time AIEE Standards No. 1 has been tentatively revised to favor the resistance method for determining the temperature rise and changing the limits for this method from 55 degrees to 60 degrees centigrade. ...


Technology '88: the main event [superconductivity]

IEEE Spectrum, 1988

The discovery in 1987 of a class of ceramic materials that remain superconducting up to liquid-nitrogen temperatures is reviewed. The problems that must be resolved before the materials can be used in practical applications are described. Current research directions are noted.<<ETX>>


More Xplore Articles

Educational Resources on Surface resistance

Back to Top

IEEE.tv Videos

On the Characterization of Thermal Coupling Resistance in a Current Mirror: RFIC Industry Showcase 2016
NeuroGrid: Recording action potentials and large-scale network activity from the surface of the brain - IEEE Brain Workshop
IMS 2011 Microapps - A Multi-Level Conductor Surface Roughness Model
Long & Winding Road From Technology to Products - Keynote David Alland - IEEE EMBS at NIH, 2019
IMS 2014: Out-of-Plane and Inline RF Switches based on Ge2Sb2Te5 Phase-Change Material
Life Sciences: Surface Enhanced Raman Spectroscopy, and more
Quantum Computation - ASC-2014 Plenary series - 4 of 13 - Tuesday 2014/8/12
IMPASS: Intelligent Mobility Platform with Active Spoke System
3D Body-Mapping for Severely Burned Patients - Julia Loegering - IEEE EMBS at NIH, 2019
IEEE Magnetics Distinguished Lecture - Yoshichika Otani
BSIM Spice Model Enables FinFET and UTB IC Design
Overview of UC Berkeley Resistance Grounded Campus Power System
Making Orthogonal Transitions with Climbing Mini-Whegs
A Robot to Mine the Moon
Materials Challenges for Next-Generation, High-Density Magnetic Recording - Kazuhiro Hono: IEEE Magnetics Distinguished Lecture 2016
Microwave PCB Structure Selection Microstrip vs. Grounded Coplanar Waveguide: MicroApps 2015 - Rogers Corporation
Silicon THz: an Opportunity for Innovation
Accelerating Machine Learning with Non-Volatile Memory: Exploring device and circuit tradeoffs - Pritish Narayanan: 2016 International Conference on Rebooting Computing
The Josephson Effect: The Josephson Volt
IROS TV 2019-STAR LAB at the University of Surrey Space Technology for Autonomous systems & Robotics

IEEE-USA E-Books

  • Calculation of earth resistance for a deep-driven rod in a multi-layer earth structure

    None

  • Discussion on “the high efficiency suspension insula tor.” Chicago, June 30, 1911. (see proceedings for June, 1911)

    None

  • Low resistance, low-bias current PIN diodes

    Low resistance PIN diodes with R<inf>s</inf>below 0.2 ohm at 20 mA and a reverse bias capacitance below 1.1 pF at -20 V will be discussed.

  • Some problems in the standardization of temperature ratings of fractional-horsepower motors

    AT the winter convention of the AIEE in New York in January 1939, there, were presented a number of papers on temperature rating of electrical apparatus.1–6Since that time AIEE Standards No. 1 has been tentatively revised to favor the resistance method for determining the temperature rise and changing the limits for this method from 55 degrees to 60 degrees centigrade. Little data have been published on how the proposed changes in standardization might affect fractional-horsepower motors. For this reason the study out-lined in this paper was undertaken. It is hoped that the information given herein will be of some assistance in standardization problems affecting fractional- horsepower motors. It is further hoped that others who have similar data on fractional-horsepower motors will make them available, regardless of whether they may support or differ with the data in the paper, in order that correct information representative of the industry may be available to those who make the standards, or any future revision of them.

  • Technology '88: the main event [superconductivity]

    The discovery in 1987 of a class of ceramic materials that remain superconducting up to liquid-nitrogen temperatures is reviewed. The problems that must be resolved before the materials can be used in practical applications are described. Current research directions are noted.<<ETX>>

  • Limits of injurious sparking in direct-current commutation

    In a paper read before the American Institute of Electrical Engineers in December, 1898, the author advanced the hypothesis that the injury done by sparking at the brushes of a direct-current dynamo was not due, as was then commonly supposed, to the current jumping across the gap between the segment and the brush, but was done while the brush was in contact with the segment, the copper of the segment being first melted and then volatilized by the concentration of current energy at one or the other of the segment edges. Perfect commutation was also defined as such a change in the current in the coil under commutation that the current density over the contact surface between the brush and the segment would be constant and uniform, and that perfect commutation would result if the coil impedance were negligible as compared with the brush contact resistance. It was also shown that with perfect commutation the total energy developed over the contact surface would be a minimum and that every part of the contact surface would receive an equal amount of energy. On this principle the question of sparking is simply a question of the temperature of the segment while it is under the brush.

  • Thermal Power Density Barriers of Converter Systems

    With the desire to integrate power converters into larger systems, high power density became a very important issue. In this paper we discuss the thermal limits of the power density of converter systems. It is shown that these limits are partly given by today's technology and partly given by physics. Employing the given equations, one can quickly estimate the maximum possible power density of a converter design. Considering the limitations discussed in the paper will be helpful in setting up roadmaps related to future trends in converter power density.

  • Superconductive resonant circuits

    None

  • Discussion on, “the constant-current mercury-arc rectifier”

    Mr. Steinmetz has outlined not only the practical instrument and its results, but he has given also a theoretical investigation of the phenomena involved. This apparatus is one which is very important in its applications, as it will often even determine the selection of the type of distributing system. With the extended application of series alternating-current arcs, it has become, I think, more and more evident that they are not of equivalent value to direct- current arcs; the result is that in many cases a strong pressure is brought to bear for direct current for series arc lighting. This apparatus is efficient, small, and inexpensive, and I hope it will enable this question to be solved from our ordinary alternating current distributing systems.

  • High-tension outlets

    The building outlet in high-tension work has become very important and will increase in importance as higher pressures are used. A great variety of outlet arrangements have been tried, each company having a method of its own. Each arrangement has its disadvantages and all are liable to give serious trouble in case of storms. Blowing rain and snow will enter the building with the open outlet, while with the bushing it is found impractical to build with glass or porcelain to sufficient size to obtain the necessary surface resistance. Plate glass with holes through the center for the wires, which are supported on line insulators, has proved a serious menace, owing to the leakage setting fire to timber construction, and the formation of an are in metal construction.



Standards related to Surface resistance

Back to Top

IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment

This guide applies to mineral oil used in transformers, load tap changers, voltage regulators, reactors, and circuit breakers. The guide discusses the following: a) Analytical tests and their significance for the evaluation of mineral insulating oil. b) The evaluation of new, unused mineral insulating oil before and after filling into equipment. c) Methods of handling and storage of mineral insulating ...


IEEE Recommended Practice for Precipitator and Baghouse Hopper Heating Systems


IEEE Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems for Power Generating Stations


IEEE Standard Requirements for Instrument Transformers

This standard is intended for use as a basis for performance and interchangeability of equipment covered, and to assist in the proper selection of such equipment. Safety precautions are also addressed. This standard covers certain electrical, dimensional, and mechanical characteristics, and takes into consideration certain safety features of current and inductively coupled voltage transformers of types generally used in the ...


IEEE Standard Test Procedures for Semiconductor X-Ray Energy Spectrometers


More Standards

Jobs related to Surface resistance

Back to Top