Conferences related to Surface cleaning

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

CVPR is the premier annual computer vision event comprising the main conference and several co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry researchers.

  • 2019 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premier annual computer vision event comprising the main conference and severalco-located workshops and short courses. With its high quality and low cost, it provides anexceptional value for students, academics and industry researchers.

  • 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premier annual computer vision event comprising the main conference and several co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry researchers.

  • 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conferenceand 27co-located workshops and short courses. With its high quality and low cost, it provides anexceptional value for students,academics and industry.

  • 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conference and 27 co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry.

  • 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    computer, vision, pattern, cvpr, machine, learning

  • 2014 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conference and 27 co-located workshops and short courses. Main conference plus 50 workshop only attendees and approximately 50 exhibitors and volunteers.

  • 2013 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conference and 27 co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry.

  • 2012 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Topics of interest include all aspects of computer vision and pattern recognition including motion and tracking,stereo, object recognition, object detection, color detection plus many more

  • 2011 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Sensors Early and Biologically-Biologically-inspired Vision, Color and Texture, Segmentation and Grouping, Computational Photography and Video

  • 2010 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Concerned with all aspects of computer vision and pattern recognition. Issues of interest include pattern, analysis, image, and video libraries, vision and graphics, motion analysis and physics-based vision.

  • 2009 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Concerned with all aspects of computer vision and pattern recognition. Issues of interest include pattern, analysis, image, and video libraries, vision and graphics,motion analysis and physics-based vision.

  • 2008 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

  • 2007 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

  • 2006 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

  • 2005 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


More Conferences

Periodicals related to Surface cleaning

Back to Top

Advanced Packaging, IEEE Transactions on

The IEEE Transactions on Advanced Packaging has its focus on the modeling, design, and analysis of advanced electronic, photonic, sensors, and MEMS packaging.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Components and Packaging Technologies, IEEE Transactions on

Component parts, hybrid microelectronics, materials, packaging techniques, and manufacturing technology.


Device and Materials Reliability, IEEE Transactions on

Provides leading edge information that is critical to the creation of reliable electronic devices and materials, and a focus for interdisciplinary communication in the state of the art of reliability of electronic devices, and the materials used in their manufacture. It focuses on the reliability of electronic, optical, and magnetic devices, and microsystems; the materials and processes used in the ...


Dielectrics and Electrical Insulation, IEEE Transactions on

Electrical insulation common to the design and construction of components and equipment for use in electric and electronic circuits and distribution systems at all frequencies.


More Periodicals

Most published Xplore authors for Surface cleaning

Back to Top

Xplore Articles related to Surface cleaning

Back to Top

Fiber Optic Connectors - Termination and Testing

Fiber Optic Connectors - Termination and Testing, 12/14/2009

In this tutorial we will review the methods used to bond, hold and align optical fibers for factory and field terminations. Scribing tools and techniques will also be covered. Next, proper polishing of the optical endface will be reviewed as well as the importance of cleaning optical surfaces to minimize damage, lower attenuation, and improve reflection values. This is followed ...


Undersea corrosion protection for aluminum structures

1970 IEEE International Conference on Engineering in the Ocean Environment - Digest of Technical Papers, 1970

This paper discusses a method of protecting aluminum alloy structure and instrument housings against corrosion. The abrasion-resisting qualities of hardcoat anodize are considered and the advantages of sealing the hardcoat with paint are stated. It is concluded that a hardcoat/paint combination offers a good temporary protection.


A Visual Dirt Detection System for Mobile Service Robots

ROBOTIK 2012; 7th German Conference on Robotics, 2012

Basic service robot technologies become more and more mature so that applications far beyond fetch and carry tasks will be possible in near future. Using a multifunctional service robot as a cleaning assistant is one interesting and challenging application. To be of any use, cleaning robots have to be able to verify the results of their work or have to ...


Fiber Optic Test Equipment and Testing Fiber Optic Links - Fiber Optic Test Equipment

Fiber Optic Test Equipment and Testing Fiber Optic Links - Fiber Optic Test Equipment, 12/14/2009

In this tutorial we begin with an introduction to fiber testing including an overview of the available equipment. This is followed by a discussion of selecting test equipment and understanding how elements such as instrument resolution, dynamic range, launch conditions and calibration effect the final measurement. Next we examine the need for connector cleanliness which is critical for successful installation, ...


The high efficiency suspension insulator

Proceedings of the American Institute of Electrical Engineers, 1911

The high-efficiency type of suspension insulator has become an important factor in high-tension transmission within the last few years, and it is hoped that the considerations which led to the design of this type will be of interest.


More Xplore Articles

Educational Resources on Surface cleaning

Back to Top

IEEE-USA E-Books

  • Fiber Optic Connectors - Termination and Testing

    In this tutorial we will review the methods used to bond, hold and align optical fibers for factory and field terminations. Scribing tools and techniques will also be covered. Next, proper polishing of the optical endface will be reviewed as well as the importance of cleaning optical surfaces to minimize damage, lower attenuation, and improve reflection values. This is followed by an examination of how to test singlemode and multimode cable assemblies for attenuation and reflections in factory and field environments. Finally, the tutorial will summarize the role of those terminating fiber optic devices. Yield is the actual loaded cost of a termination and includes the component cost, consumables, and the associated labor. After completing this tutorial you should have an understanding of: Bonding and scribing; Polishing; Cleaning; Testing patchcords; and Yield.

  • Undersea corrosion protection for aluminum structures

    This paper discusses a method of protecting aluminum alloy structure and instrument housings against corrosion. The abrasion-resisting qualities of hardcoat anodize are considered and the advantages of sealing the hardcoat with paint are stated. It is concluded that a hardcoat/paint combination offers a good temporary protection.

  • A Visual Dirt Detection System for Mobile Service Robots

    Basic service robot technologies become more and more mature so that applications far beyond fetch and carry tasks will be possible in near future. Using a multifunctional service robot as a cleaning assistant is one interesting and challenging application. To be of any use, cleaning robots have to be able to verify the results of their work or have to find dirt in the beginning for point-wise cleaning. This paper presents an approach towards the detection of various dirt on textured surfaces using a low-cost RGB-D sensor. The algorithm aims at removing the regular part of the image with spectral residual filtering leaving only the dirt and some noise. With further post-processing it is possible to localize many kinds of dirt in the image. The proposed method is fast, reliable, quite robust to illumination changes and does not require any prior training of the surfaces to inspect.

  • Fiber Optic Test Equipment and Testing Fiber Optic Links - Fiber Optic Test Equipment

    In this tutorial we begin with an introduction to fiber testing including an overview of the available equipment. This is followed by a discussion of selecting test equipment and understanding how elements such as instrument resolution, dynamic range, launch conditions and calibration effect the final measurement. Next we examine the need for connector cleanliness which is critical for successful installation, followed by a review of fiber identifiers, visual tracers and visual inspection. Finally, fiber optic talk sets will be reviewed along with the applications and features that should be addressed when communication is required. After completing this tutorial you should have an understanding of: Introduction to Fiber Testing; Selecting Test Equipment; Cleaning Fiber Identifiers; Visual Tracers; Visual Inspection; and Fiber Optic Talk Sets.

  • The high efficiency suspension insulator

    The high-efficiency type of suspension insulator has become an important factor in high-tension transmission within the last few years, and it is hoped that the considerations which led to the design of this type will be of interest.

  • Simplified rear-side patterning for silicon heterojunction IBC solar cells: development of the in situ “nano-envelope” dry clean

    The heterojunction interdigitated back-contact (HJ IBC) cell technology enables remarkably high cell efficiencies, but requirescomplex processing for the rear-side patterning of the interdigitated a-Si:H electron and hole hetero-contacts. Therefore, the HJ IBC process flow must be simplified into a sequence that is cost-effective and industrially-compatible. Towards this goal, a litho-free, all-dry process sequence is being developed. As part of this simplified process flow, a novel in situ dry clean process called “nano- envelope” clean is developed to replace the wet cleaning after dry etching of a-Si:H. Surface contaminationanalysis and passivation studies prove that the developed dry clean is as effective as the standard wet clean. Since the “nano-envelope” clean can bedone in the same PECVD tool, the sequence from dry etching to repassivation can be done fully in situ.

  • Recent Measurements at SLAC on Superconducting Niobium X-Band Cavities

    Measurements at 8.6 GHz on TM mode superconducting niobium cavities have been carried out at SLAC in an attempt to establish definitive conditions for reproducibly attaining high peak electric and magnetic fields and high residual Q's. Four cavities, processed by techniques which insure the presence of an oxide layer on the niobium surface before final high temperature outgassing, have given peak magnetic fields exceeding 1000 G and corresponding peak electric fields in excess of 56 MV/m. From this and related experience it is speculated that, in order to achieve high peak fields, carbon present on the niobium surface must be removed through the formation of volatile compounds with oxygen or fluorine during high temperature processing. Data are also presented on the effect on rf properties of exposure at room temperature to various gases. Measurements on anodized cavities are briefly discussed.

  • Parametric Optimization of Tape-burnish Process for Perpendicular Recording Media of Hard Disk Drive

    The requirement of perpendicular recording media to further reduce spacing between read/write head and media surface will challenge tape-burnish process to produce more and defect-free media surfaces. This paper explores Taguchi DoEs application in optimizing the tape-burnishing process. The experiments show that optimized process can produce the more required media surface.

  • Residue defect study on amorphous silicon film

    In advanced technology nodes, many new materials have been introduced to improve the device capability. This means new particle sources are also introduced through more complicated process. Hence, the defect control will be more important for manufacturing and yield improvement. In this paper we addressed one type of residue defect found on surface of amorphous silicon film. The defect source and forming mechanism were revealed by our experiments. Finally, the cleaning method was shared that can remove this defect.

  • Desorption of Adsorbed Gas Molecule on a Pentagon at a Tip of Carbon Nanotube by Pulse Laser Irradiation

    Six pentagons located at a tip of MWNT and behavior of a single gas molecule on the pentagons can be observed by field emission microscopy (FEM) using multiwall carbon nanotube (MWNT) with clean surface. Pulse laser irradiation is effective method to obtain the clean surface, and desorption of molecule on a pentagon can be artificially and responsively controlled by this method. Adsorption of a gas molecule onto a pentagon brings about a change from a pentagonal ring image to a bright circular spot image with stepwise increase of V emission current, and vice versa. This switching action of emission current corresponding to adsorption and desorption of a single molecule with a good reproducibility makes to expect an application to monomolecular devices



Standards related to Surface cleaning

Back to Top

No standards are currently tagged "Surface cleaning"


Jobs related to Surface cleaning

Back to Top