Conferences related to Structural beams

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


More Conferences

Periodicals related to Structural beams

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Components and Packaging Technologies, IEEE Transactions on

Component parts, hybrid microelectronics, materials, packaging techniques, and manufacturing technology.


More Periodicals

Most published Xplore authors for Structural beams

Back to Top

Xplore Articles related to Structural beams

Back to Top

Double-deck steam turbine power plants

Proceedings of the American Institute of Electrical Engineers, 1908

In the rapid development attending the introduction of the steam turbine, there has been but comparatively little tendency to introduce radical departures from accepted engine practice. The most important changes have taken place in the boiler room, while in the rest of the plant very few changes have been inaugurated other than a general increase of compactness in the turbo-generating ...


Floating ocean platforms

IEEE 1971 Conference on Engineering in the Ocean Environment, 1971

Floating ocean platforms have many potential applications. Concrete construction has definite cost advantages over steel construction. Modular designs lead to feasible construction techniques. This paper discusses the design and motion of platforms designed with these observations as guides.


Cement in central station design

Proceedings of the American Institute of Electrical Engineers, 1905

The Illinois Steel Company has just completed and placed in operation at its plant in South Chicago, a new power-house for the supply of power to its various mills at South Chicago, and at Buffington, 10 miles distant. This station contains, at the present time, two units, each consisting of a 2000-kw., 25-cycle, 2200-volt, three-phase generator, direct driven by a ...


Industrial illumination and the average performance of lighting systems

Proceedings of the American Institute of Electrical Engineers, 1912

Illumination in the past has been looked upon largely as an accessory. Modern illuminating engineering, however, is concerned with the adaptation of the available types of lamps to certain supply circuits, to various classes of service, and to given conditions of building construction.


Allen telescope array digital processing requirements driven by radio frequency interference concerns

Radio Science, 2005

As a new generation radio telescope, the Allen Telescope Array (ATA) is a prototype for the Square Kilometer Array (SKA). Here we describe recently developed design constraints for the ATA digital signal processing chain as a case study for SKA processing. As radio frequency interference (RFI) becomes increasingly problematic for radio astronomy, radio telescopes must support a wide range of ...


More Xplore Articles

Educational Resources on Structural beams

Back to Top

IEEE-USA E-Books

  • Double-deck steam turbine power plants

    In the rapid development attending the introduction of the steam turbine, there has been but comparatively little tendency to introduce radical departures from accepted engine practice. The most important changes have taken place in the boiler room, while in the rest of the plant very few changes have been inaugurated other than a general increase of compactness in the turbo-generating room. Outside of the tendency to structural foundations for generating units, there is little opportunity for originality in design without involving a radical change in the ensemble.

  • Floating ocean platforms

    Floating ocean platforms have many potential applications. Concrete construction has definite cost advantages over steel construction. Modular designs lead to feasible construction techniques. This paper discusses the design and motion of platforms designed with these observations as guides.

  • Cement in central station design

    The Illinois Steel Company has just completed and placed in operation at its plant in South Chicago, a new power-house for the supply of power to its various mills at South Chicago, and at Buffington, 10 miles distant. This station contains, at the present time, two units, each consisting of a 2000-kw., 25-cycle, 2200-volt, three-phase generator, direct driven by a 24-in. by 60-in. by 48-in. horizontal-vertical, cross-compound engine. The addition of two more generating units, of a capacity of 4000 kw. each, is contemplated in the near future. This alternating-current station operates in conjunction with a direct-current station which has been in operation for some time. The two power-houses are connected by means of synchronous converters. Both stations take steam from blast-furnace boiler-houses, in which the fuel is excess blast-furnace gas. The supply of this excess gas is quite variable at times, and it is desirable under such conditions to be able to shift load from one station to the other, as desired. Such an arrangement gives the opportunity of utilizing completely all excess blast-furnace gas at either point. The principal points of interest with which we are concerned to-night, deal entirely with the use of cement in the building of this and other power- houses.

  • Industrial illumination and the average performance of lighting systems

    Illumination in the past has been looked upon largely as an accessory. Modern illuminating engineering, however, is concerned with the adaptation of the available types of lamps to certain supply circuits, to various classes of service, and to given conditions of building construction.

  • Allen telescope array digital processing requirements driven by radio frequency interference concerns

    As a new generation radio telescope, the Allen Telescope Array (ATA) is a prototype for the Square Kilometer Array (SKA). Here we describe recently developed design constraints for the ATA digital signal processing chain as a case study for SKA processing. As radio frequency interference (RFI) becomes increasingly problematic for radio astronomy, radio telescopes must support a wide range of RFI mitigation strategies, including online adaptive RFI nulling. We observe that the requirements for digital accuracy and control speed are driven not by astronomical imaging but by RFI. This can be understood from the fact that high dynamic range and digital precision are necessary to remove strong RFI signals from the weak astronomical background and because RFI signals may change rapidly compared with celestial sources. We review and critique lines of reasoning that lead us to some of the design specifications for ATA digital processing, including these specifications: Beam former coefficients must be specified with at least 1° precision and at least once per millisecond to enable flexible RFI excision.

  • Using multiple beams to identify radio frequency interference in the search for extraterrestrial intelligence

    The Allen Telescope Array (ATA) is a multiuser instrument and will perform simultaneous radio astronomy and radio search for extraterrestrial intelligence (SETI) observations. It is a multibeam instrument, with 16 independently steerable dual-polarization beams at four different tunings. Here we describe a new method for identifying radio frequency interference (RFI) that leverages the unique attributes of the ATA. Given four beams at one tuning, it is possible to distinguish RFI from true ETI signals by pointing the beams in different directions. Any signal that appears in more than one beam can be identified as RFI and ignored. We discuss the effectiveness of this approach using realistic simulations of the fully populated 350 element configuration of the ATA as well as the interim 32 element configuration. Over a 5 min integration period, we find RFI rejection ratios exceeding 50 dB over most of the sky.

  • Analyses on the tied-arch action of loaded reinforced-concrete beams with corroded steel reinforcement

    The tied-arch action was analyzed by considering 27 reinforced-concrete beams without web reinforcements that were dismantled from a wide range of deteriorated coastal and marine structures and with varying degrees of reinforcement corrosion. Under 2-point loading and changing shear span ratio, changes in loading capacity for beams of the same corrosion degree were studied. Formulas relating ultimate moment of reinforcements with the same corrosion level at increasing a/d ratio were then developed. Load-carrying capacity profile for beams with reinforcement corrosion of 1% and the same cross section was described. The minimum ultimate moment occurs at a/d = 2.5 and at 52% of the full flexural moment, suggesting that the difference in ultimate moment between theoretical and experimental results at the minimum point equals 11%. The results show that the developed theoretical relations compared well with experimental values.

  • ORION: an advanced accelerator facility at SLAC

    Extending the center-of-mass energy frontier for high-energy physics depends on the research and development that is conducted now in the area of advanced accelerator physics and technology. In this article, we present the design and beam dynamics simulations for the emittance-compensated, RF photoinjector of the ORION Facility.

  • Logistic simulator for steel producing factories

    The logistic processes in most steel producing plants are very complex. To assist the decision makers in steel producing plants, Incontrol Enterprise Dynamics have developed for and in cooperation with SMS Demag in Germany, a simulator that can be used to rapidly model any steel plant. The Steel Plant Simulator has been built using the software package Enterprise Dynamics/spl reg/ and allows for rapid insight into the influences of layout changes, process and speed parameters, length of production runs, changes in planning and type of products that are being produced. The Simulator incorporates a dynamic scheduler to create a realistic production planning. Results include production Gantt charts, time-path diagrams, utilization figures and production statistics.

  • Main Parameters of ILC-Tevatron Based Lepton-Hadron and Photon-Hadron Colliders

    The construction of the ILC tangential to Tevatron ring will give opportunity to investigate electron-proton, positron-proton, electron-antiproton, positron-antiproton interactions at 1 TeV center of mass energy. The analysis of the lepton-hadron collisions in these energy region is very important both for understanding of strong interaction dynamics and for adequate interpretation of future LHC and VLHC data. In addition, ILC-Tevatron collider will provide a possibility to realize photon-hadron collisions in the same energy region using Compton backscattered laser photon off ILC electron beam. Main parameters of these colliders are estimated and their physics search potential is briefly discussed.



Standards related to Structural beams

Back to Top

No standards are currently tagged "Structural beams"


Jobs related to Structural beams

Back to Top