Conferences related to Standards activities

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


2020 IEEE International Solid- State Circuits Conference - (ISSCC)

ISSCC is the foremost global forum for solid-state circuits and systems-on-a-chip. The Conference offers 5 days of technical papers and educational events related to integrated circuits, including analog, digital, data converters, memory, RF, communications, imagers, medical and MEMS ICs.


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


IGARSS 2020 - 2020 IEEE International Geoscience and Remote Sensing Symposium

All fields of satellite, airborne and ground remote sensing.


More Conferences

Periodicals related to Standards activities

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Circuits and Systems, IEEE Transactions on

The Transactions on Biomedical Circuits and Systems addresses areas at the crossroads of Circuits and Systems and Life Sciences. The main emphasis is on microelectronic issues in a wide range of applications found in life sciences, physical sciences and engineering. The primary goal of the journal is to bridge the unique scientific and technical activities of the Circuits and Systems ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Circuits and Systems for Video Technology, IEEE Transactions on

Video A/D and D/A, display technology, image analysis and processing, video signal characterization and representation, video compression techniques and signal processing, multidimensional filters and transforms, analog video signal processing, neural networks for video applications, nonlinear video signal processing, video storage and retrieval, computer vision, packet video, high-speed real-time circuits, VLSI architecture and implementation for video technology, multiprocessor systems--hardware and software-- ...


More Periodicals

Most published Xplore authors for Standards activities

Back to Top

Xplore Articles related to Standards activities

Back to Top

Lossless shape coding using the four colors theorem

Proceedings 1998 International Conference on Image Processing. ICIP98 (Cat. No.98CB36269), 1998

This paper presents an original approach to the lossless encoding of an exhaustive image partition. The method is based on a preliminary quad-tree description of the partition that associates adaptive sized blocks to the leaves of the tree. The generated blocks can have a minimum dimension of one pixel, in order to fit every possible region shape. Using such a ...


Integrating risk assessment with cost estimation

IEEE Software, 1997

Incorporating hard data into risk estimates can help make them more accurate. The author developed a quantitative method and a corresponding tool that draw on questionnaires and project history to help calculate software project risk contingencies: RiskMethod and RiskTool.


Near term intelligent network standards

ICC 91 International Conference on Communications Conference Record, 1991

A description is given of some of the ways US AIN (advanced intelligent network) activities are supporting the CCITT IN (intelligent network) standardization effort. The author affirms the desire of the US to develop a world standard rather than a US standard. Efforts to facilitate agreement at CCITT and T1S1 arrangements for providing standards for US-specific IN options are described.<<ETX>>


A Progress Report on G-EMC Standards Activities

1971 IEEE International Electromagnetic Compatibility Symposium Record, 1971

None


Bandwidth-adaptive VP protection using user cells

ICC '98. 1998 IEEE International Conference on Communications. Conference Record. Affiliated with SUPERCOMM'98 (Cat. No.98CH36220), 1998

Broadband integrated services digital networks (B-ISDN), which utilize asynchronous transfer mode (ATM) technology, promise to provide a common platform for greatly increased service capacity. In terms of virtual path (VP) protection switching time, a high-bandwidth VP should be switched faster than a low-bandwidth VP in order to keep the number of damaged cells proportional to the total number of cells ...


More Xplore Articles

Educational Resources on Standards activities

Back to Top

IEEE-USA E-Books

  • Lossless shape coding using the four colors theorem

    This paper presents an original approach to the lossless encoding of an exhaustive image partition. The method is based on a preliminary quad-tree description of the partition that associates adaptive sized blocks to the leaves of the tree. The generated blocks can have a minimum dimension of one pixel, in order to fit every possible region shape. Using such a preliminary quad-tree, coded with just a few bits, we univocally describe the partition using some additional information that relates together the leaves. Every leaf of the quad-tree is given a label, with the rule that two neighboring leaves share the same label only if they belong to the same region. By exploiting a classical result of the planar geometry, known as the four colors theorem, it is possible to reduce the number of labels (i.e., colors) to a theoretical limit of four. A simple and efficient color allocation algorithm is also proposed, which uses more than four colors, but that reduces the entropy to less than 2 bits per color. The achieved representation is particularly useful in region-based image coders, for it greatly reduces the code dimension as compared to classical edge-based methods.

  • Integrating risk assessment with cost estimation

    Incorporating hard data into risk estimates can help make them more accurate. The author developed a quantitative method and a corresponding tool that draw on questionnaires and project history to help calculate software project risk contingencies: RiskMethod and RiskTool.

  • Near term intelligent network standards

    A description is given of some of the ways US AIN (advanced intelligent network) activities are supporting the CCITT IN (intelligent network) standardization effort. The author affirms the desire of the US to develop a world standard rather than a US standard. Efforts to facilitate agreement at CCITT and T1S1 arrangements for providing standards for US-specific IN options are described.<<ETX>>

  • A Progress Report on G-EMC Standards Activities

    None

  • Bandwidth-adaptive VP protection using user cells

    Broadband integrated services digital networks (B-ISDN), which utilize asynchronous transfer mode (ATM) technology, promise to provide a common platform for greatly increased service capacity. In terms of virtual path (VP) protection switching time, a high-bandwidth VP should be switched faster than a low-bandwidth VP in order to keep the number of damaged cells proportional to the total number of cells in that VP. This paper proposes a notification method using user cells. The proposed method can notify without interrupting the existing user cells. The total switching times were measured experimentally as 1 msec for 1.5 Mbps and 100 /spl mu/sec for 15 Mbps. These results demonstrate that the bandwidth adaptive method is very fast compared to VP AIS methods, and even STM methods which require 50 msec.

  • IEEE P1149.5 standard module test and maintenance bus

    The IEEE P1149.5 standard module test and maintenance bus (MTM-Bus) standardizes a serial, backplane test & maintenance bus that can be used to integrate modules into testable and maintainable subsystems. This paper discusses the protocol, some implementation details and the status of the standard and related standards activities.<<ETX>>

  • The standards professional: the employee you didn't know you needed. I

    None

  • International standards in radio communication

    A REVIEW is given of some of the international technical standards activities and Recommendations of the International Radio Consultative Committee (CCIR) for radio communications. A new Recommendation for the digital coding of television signals provides a basis for a single world standard for video signals in broadcasting studios, recording, and exchange of programs. Work is underway on high-definition television and a standard for satellite direct broadcasting downlink. Fixed satellite earth-station antenna standards (developed earlier), and performance criteria for satellite links in the integrated services digital network are being improved. Digital microwave radio relay standards include allowable bit error ratio, channel arrangements, and baseband interconnection. Mobile service Recommendations include system standards for VHF/UHF automated radiotelephony, a future global maritime distress and safety system, and radio paging codes and formats. Standards for the use of ARQ in HF and maritime communications, and the use of Universal Coordinated Time (UTC) in international telecommunications, are based on CCIR Recommendations.

  • Learning to knit SOCs profitably

    General solutions for SOC (System-on-Chip) test appear to demand new models of partnership among core designers, system integrators, test system manufacturers, test engineers. and process engineers. Each of these partners possesses unique value to contribute to the fundamental understanding that will enable the successful management of the interactions among disparate circuits. Progress towards this goal of cooperation is hastened to the extent that the partners adopt standard practices, which trade off small restrictions in flexibility against large decreases in time to revenue through test. The opportunity before our industry is to identify conditions that allow reasonable semiconductor product performance while also providing a degree of regularity that is sufficient for EDA tools to achieve the required testability. However, the EDA vendors cannot be expected to figure out solutions to all of the problems; they need help from the rest of the industry. Well-supported standards activities provide a means for gleaning lessons from the pioneering visionaries who lead the industry. The potential rewards for those who teach themselves and their partners how to achieve the boldest vision of SOC are tremendous.

  • A "single authoring" programming model: the interaction logic

    For the mobile Internet, new content and applications are developed with the intent of delivering it through many different channels with different characteristics. Therefore, such content and applications must be adapted and optimized to each channel. Also, since new devices and content emerge continuously, this adaptation must be made to work for new devices not originally envisioned. In addition, it is important to be able to adapt existing content that may not have been created with this multi-channel or multi-modal deployment model in mind. Today, multi-channel applications are often repeatedly authored once for each channel. These multiple authoring methodologies can be classified as follows: repeated authoring of the application for each target channel; or repeated authoring of style sheets that enable transformation of a common XML representation. Under some constrained conditions, it is possible to automate the transformation of legacy or newly developed applications to multiple channels. It should be clear that it is in general impossible to automate the adaptation of legacy applications. Single authoring is motivated by the need to author, maintain, and revise content for delivery to an ever-increasing range of end-user devices.



Standards related to Standards activities

Back to Top

Health Informatics - Personal Health Device Communication - Part 10441: Device Specialization - Cardiovascular Fitness and Activity Monitor

Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between personal cardiovascular fitness and activity monitoring devices and managers (e.g. cell phones, personal computers, personal health appliances, set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073 ...


IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers

This guide includes guidelines for the following: insulating oil maintenance and diagnostics, oil reclamation, testing methods for the determination of remaining insulation (paper) life, and upgrades of auxiliary equipment such as bushings, gauges, deenergized tap changers (DETCs), load tap changers (LTCs) (where applicable), and coil reclamping. The goal of this guide is to assist the user in extending the useful ...


IEEE Recommended Practice for Distributed Interactive Simulation - Exercise Management and Feedback

This standard is part of a proposed set of standards for Distributed Interactive Simulation (DIS) applications. Each standard in the proposed set describes one or more of the several elements that constitute the DIS environment. As a whole, the set of standards will define an interoperable simulated battle environment. This particular standard addresses the exercise control and feedback stations connected ...


IEEE Standard for Motor Vehicle Event Data Recorder (MVEDR)

Motor Vehicle Event Data Recorders (MVEDRs) collect, record, store and export data related to motor vehicle pre-defined events. This standard defines a protocol for MVEDR output data compatibility and export protocols of MVEDR data elements. This standard does not prescribe which specific data elements shall be recorded, or how the data are to be collected, recorded and stored. It is ...


Systems and software engineering -- Software life cycle processes

This International Standard establishes a common framework for software life cycle processes, with welldefined terminology, that can be referenced by the software industry. It contains processes, activities, and tasks that are to be applied during the acquisition of a software product or service and during the supply, development, operation, maintenance and disposal of software products. Software includes the software portion ...