Conferences related to Spinning machines

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


More Conferences

Periodicals related to Spinning machines

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automation Science and Engineering, IEEE Transactions on

The IEEE Transactions on Automation Sciences and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. We welcome results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, ...


Computer Architecture Letters

Rigorously peer-reviewed forum for publishing early, high-impact results in the areas of uni- and multiprocessors computer systems, computer architecture workload characterization, performance evaluation and simulation techniques, and power-aware computing


More Periodicals

Most published Xplore authors for Spinning machines

Back to Top

Xplore Articles related to Spinning machines

Back to Top

Drag Reduction Study on Rotors with Triangle Groove Surface

2009 International Conference on Energy and Environment Technology, 2009

In view of the fact that surfaces with riblets can reduce turbulent flow drag, a kind of high speed rotor which used on rotor spinning machine were designed with micro-grooves on its surface. By 3D simulating, the total drag coefficient of flow field on smooth rotor surface and non-smooth rotor surface with grooves were worked out respectively. From the results ...


Power outages and power dip ride-through

1995 IEEE Annual Textile, Fiber and Film Industry Technical Conference, 1995

In today's yarn making environment, high production yields are of major importance. This implies that the spinning machines operate 24 hrs/day and that there is a minimum of interruptions. The machines are built for use with multiple products, making changes "on the fly" possible. String-up of the yarn is also highly automated, making it relatively quick and efficient. Notwithstanding all ...


Application of air curtain on spinning machine for viscose filament

2011 International Conference on Electric Technology and Civil Engineering (ICETCE), 2011

In order to reduce the energy consumption on ventilation and air-conditioning, the traditional direct air conditioning system in the viscose filament workshop was changed into "machine-focused and workshop-subsidiary" air conditioning scheme by introducing the air curtain, with the technological requirements in the machine satisfied. The results showed that the energy consumption on ventilation system was reduced by 40% while the ...


A prospective theoretical study of double offset with spherical main reflector application to Ku band ground stations

IEEE Antennas and Propagation Society International Symposium. 1995 Digest, 1995

Double reflector offset antennas with spherical main reflector have recently been considered as an interesting alternative for fixed satellite services applications subjected to the newest CCIR radiation pattern recommendation. The great appeal of this configuration is the possibility of reducing main reflector manufacturing cost, which contrary to shaped and classical double reflector offset antennas can be achieved by manufacturing spinning ...


Design of a high speed Switched Reluctance Motor for spindle drive

2007 Compatibility in Power Electronics, 2007

Switched reluctance motor (SRM) for use as a spindle drive in a spinning machine will be presented in this paper. The SRM drive system is intended to meet the increasing demands of the textile industry with respect to manufacturing time, costs and quality of textile twists. The desired SRM drive system is supposed to run at high speed up to ...


More Xplore Articles

Educational Resources on Spinning machines

Back to Top

IEEE-USA E-Books

  • Drag Reduction Study on Rotors with Triangle Groove Surface

    In view of the fact that surfaces with riblets can reduce turbulent flow drag, a kind of high speed rotor which used on rotor spinning machine were designed with micro-grooves on its surface. By 3D simulating, the total drag coefficient of flow field on smooth rotor surface and non-smooth rotor surface with grooves were worked out respectively. From the results of wall shearing stress of the two types rotor, it is shown that high-speed rotors with micro triangle grooves can reduce air drag to a certain extent, and the groove depth and interval between them affect the total drag force. Compared to smooth rotors, the maximum rate of drag reduction by micro grooved surface is up to 1.284%.

  • Power outages and power dip ride-through

    In today's yarn making environment, high production yields are of major importance. This implies that the spinning machines operate 24 hrs/day and that there is a minimum of interruptions. The machines are built for use with multiple products, making changes "on the fly" possible. String-up of the yarn is also highly automated, making it relatively quick and efficient. Notwithstanding all the automation, removing the yarn after a break and stringing it up again, is a time of lost production. Although yarn breakage may occur for different reasons, in a well controlled environment, power outages are the major cause. To reduce the risk of interruption during short power outages or brown-out different design features are incorporated and become an important part of the drive and control system for a spinning machine application.<<ETX>>

  • Application of air curtain on spinning machine for viscose filament

    In order to reduce the energy consumption on ventilation and air-conditioning, the traditional direct air conditioning system in the viscose filament workshop was changed into "machine-focused and workshop-subsidiary" air conditioning scheme by introducing the air curtain, with the technological requirements in the machine satisfied. The results showed that the energy consumption on ventilation system was reduced by 40% while the energy consumption on fresh air was reduced by approximately 46%, compared with the traditional air-conditioning scheme.

  • A prospective theoretical study of double offset with spherical main reflector application to Ku band ground stations

    Double reflector offset antennas with spherical main reflector have recently been considered as an interesting alternative for fixed satellite services applications subjected to the newest CCIR radiation pattern recommendation. The great appeal of this configuration is the possibility of reducing main reflector manufacturing cost, which contrary to shaped and classical double reflector offset antennas can be achieved by manufacturing spinning machines or by fitting panels of the same radius of curvature. However this configuration has a serious competitor widely employed in the range of aperture diameters above 150/spl lambda/, these are the symmetrical double reflector antennas. This configuration also has as its main advantage the facility of manufacture, since both main and subreflector are axially symmetric, and the control over antenna aperture power distribution, which can he accomplished through reflectors shaping. On the other hand this same configuration presents some significant drawbacks; these are subreflector aperture blockage and strut scattering which degrade antenna gain and result in sidelobe radiation pattern levels increasing. Regarding the double offset reflector configuration with spherical main reflector, although it is not impaired by blockage, it presents limited aperture illumination control, since the subreflector is basically designed as a phase corrector intended to yield an aperture constant phase wavefront. Recently some papers describing synthesis methods for double offset with spherical main reflector configuration, as well as parametric studies and comparisons between this and other double offset configurations have been published. In this paper the intention is to investigate the viability of employing this configuration by comparing its electrical performance with the one presented by a symmetrical double reflector antenna of similar gain. The study was carried out in a diameter range immediately superior to 150/spl lambda/ in the Ku band allocated for fixed satellite service (10.7-12.75GHz and 13.8-14.8GHz).

  • Design of a high speed Switched Reluctance Motor for spindle drive

    Switched reluctance motor (SRM) for use as a spindle drive in a spinning machine will be presented in this paper. The SRM drive system is intended to meet the increasing demands of the textile industry with respect to manufacturing time, costs and quality of textile twists. The desired SRM drive system is supposed to run at high speed up to 30000 rpm and has to be robust, efficient and low cost since a mass production is aspired. For the design of the SRM a finite elements (FEM) model was developed which allows a fast and accurate machine design. A comparison of predicted and measured static SRM characteristic will show the high reliability of the presented design procedure. In order to run the motor without a shaft-position sensor a simple and robust sensorless control method is proposed. Therefore, the design of the control system along with the power electronics converter will be presented.

  • The control of dosing pumps by modern electric drive

    In this article, we have described the design of the switched-reluctance electric drive of spinning machine dosing pumps. Yarn quality parameters are given. The main parameter is a yarn linear density. The block diagram of the automated drive is given; the use of reluctance motor is justified. We have elaborated the low-speed engine design (100 rpm). The control system establishes and maintains motor speed that provides the required dosing pump feed depending on the given linear density. The functional diagram of the spinning machine is described. The description of the chosen system of the yarn quality monitoring sensors is given. A point strain gauge is used to measure the weight of fiber in the process of winding. Networked sensors and counters with its own IP-address are appropriate to use at the control and monitoring overall line. Electric drive control is performed by dedicated device based on the high-speed microcontroller equipped with a storage base, display, and control and documentation system.

  • Robotic Metal Spinning − Forming Non-axisymmetric Products Using Force Control −

    Metal spinning is a plastic forming process that forms a metal sheet by forcing the metal onto a rotating mandrel using a roller tool. Products formed by metal spinning have been inherently limited to round shapes. In this paper, we propose metal spinning of non-axisymmetric products by applying hybrid position/force control. The pushing force of the roller is regulated so that the roller can track the changing radius of the mandrel. Our forming experiment demonstrates that a thin aluminum sheet can be formed into a non- axisymmetric shape.

  • Improved high tenacity/high modulus polyester for stiffer mooring ropes

    High tenacity polyester development followed the advances in high tenacity nylon, and this product has been used since the 1950's as the basic raw material for plastics and rubber reinforcement (i.e. tire cord), as well as rope-manufacturing yarn. Further improvements in tenacity and modulus are possible and a modified polyester polymer, such as PET-PEN blend or co-polymer for example, can further enhance these properties. From test observations, it is apparent that mooring rope construction can also be further optimized using innovative rope making processes in order to make stronger and yet lighter mooring ropes.

  • Guidelines in selecting variable-speed drives from a user's viewpoint

    The author notes that the optimum selection of a variable-speed drive requires an understanding and definition of the application, awareness of the various types of adjustable-speed drives as well as an understanding of their characteristics, and knowledge of the type of support required. He presents some general guidelines to assist in selecting the appropriate drives for a given application. He first discusses the technical characteristics both of the application and of the drive itself. Next, he includes vendor support characteristics that are nontechnical in nature but contribute to the total selection process. The present discussion is restricted to electrical adjustable-speed drives.<<ETX>>

  • Force-controlled metal spinning machine using linear motors

    Metal spinning is a plastic forming process that forms a metal sheet by forcing the metal onto a rotating mandrel using a roller tool. A novel metal spinning machine was designed in which the roller is directly driven by linear motors. We aim to form non-axisymmetric products by controlling the pushing force of the roller so that the roller can quickly track the changing radius of the mandrel. Our experimental results show that the linear motors substantially improve response of the force control and non-axisymmetric products can be rapidly formed. Open-loop force control without a force sensor was also studied. It exhibited a comparable performance to closed-loop control with regard to the forming time



Standards related to Spinning machines

Back to Top

No standards are currently tagged "Spinning machines"


Jobs related to Spinning machines

Back to Top