Conferences related to Shock absorbers

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM)

The scope of the 2020 IEEE/ASME AIM includes the following topics: Actuators, Automotive Systems, Bioengineering, Data Storage Systems, Electronic Packaging, Fault Diagnosis, Human-Machine Interfaces, Industry Applications, Information Technology, Intelligent Systems, Machine Vision, Manufacturing, Micro-Electro-Mechanical Systems, Micro/Nano Technology, Modeling and Design, System Identification and Adaptive Control, Motion Control, Vibration and Noise Control, Neural and Fuzzy Control, Opto-Electronic Systems, Optomechatronics, Prototyping, Real-Time and Hardware-in-the-Loop Simulation, Robotics, Sensors, System Integration, Transportation Systems, Smart Materials and Structures, Energy Harvesting and other frontier fields.


IECON 2020 - 46th Annual Conference of the IEEE Industrial Electronics Society

IECON is focusing on industrial and manufacturing theory and applications of electronics, controls, communications, instrumentation and computational intelligence.


More Conferences

Periodicals related to Shock absorbers

Back to Top

Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Computer Graphics and Applications, IEEE

IEEE Computer Graphics and Applications (CG&A) bridges the theory and practice of computer graphics. From specific algorithms to full system implementations, CG&A offers a strong combination of peer-reviewed feature articles and refereed departments, including news and product announcements. Special Applications sidebars relate research stories to commercial development. Cover stories focus on creative applications of the technology by an artist or ...


Control Systems Technology, IEEE Transactions on

Serves as a compendium for papers on the technological advances in control engineering and as an archival publication which will bridge the gap between theory and practice. Papers will highlight the latest knowledge, exploratory developments, and practical applications in all aspects of the technology needed to implement control systems from analysis and design through simulation and hardware.


More Periodicals

Most published Xplore authors for Shock absorbers

Back to Top

Xplore Articles related to Shock absorbers

Back to Top

The development of fuzzy virtual spring damper generator

2010 IEEE Workshop on Advanced Robotics and its Social Impacts, 2010

The document that should appear here is not currently available.


Modern development in single-phase generators

Proceedings of the American Institute of Electrical Engineers, 1908

The single-phase alternator has been in comrrtercial use now for twenty years and it may seem surprising that there should be new developments at this late date. However, single-phase alternators have been used in the past almost exclusively for lighting work, and in units of comparatively small output and low speed. Recently, on account of the adoption of single-phase current ...


IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems

IEEE P1361/D5, February 2014, 2014

This guide is applicable to all stand-alone photovoltaic (PV) systems where PV is the only charging source. Stand-alone PV system parameters and operating conditions are discussed in relation to battery characteristics and expected system performance. Charging parameters for PV systems are suggested to help in the selection of a battery for a specific application. Finally, a performance test to verify ...


Discussion on “a new large generator for Niagara Falls”, application of fractional-pitch windings to alternating-current generators”, and “modern developments in single-phase generators.” Atlantic city, N. J., July 1, 1908

Proceedings of the American Institute of Electrical Engineers, 1908

Wm. J. Foster: There are two or three points in connection with the generator described by Mr. Behrend to which I would like to call attention. I think that in many respects it is a most remarkable machine. The efficiency as given by Mr. Behrend in the tabulation is something unusual, when we consider that it is a generator of ...


Time domain simulations of the CLIC PETS (power extraction and transfer structure) with GdfidL

PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268), 2001

The Compact Linear Collider (CLIC) PETS is required to produce about 0.5 GW RF power per metre in the 30 GHz CLIC decelerator when driven by the high current beam (/spl sim/ 270 A). To avoid beam break-up in the decelerator it is necessary to provide strong damping of the transverse deflecting modes. A PETS geometry with a level of ...


More Xplore Articles

Educational Resources on Shock absorbers

Back to Top

IEEE-USA E-Books

  • The development of fuzzy virtual spring damper generator

    The document that should appear here is not currently available.

  • Modern development in single-phase generators

    The single-phase alternator has been in comrrtercial use now for twenty years and it may seem surprising that there should be new developments at this late date. However, single-phase alternators have been used in the past almost exclusively for lighting work, and in units of comparatively small output and low speed. Recently, on account of the adoption of single-phase current for traction work, an important demand has arisen for large high-speed, low- frequency, single-phase generators. It is in the design and manufacture of such units that the engineer has had to overcome new difficulties. In large, high-speed, single-phase generators for 15 and 25 cycles the difficulties met with are due almost entirely to the large pole-pitch and high armature reaction which it is necessary to adopt. A 500-kw., 60-cycle, 72-pole, single- phase generator would have a pole-pitch of about 7 in., while a 6000-kw., 15-cycle, 2-pole machine would have one machine of about 120 in. It is easily seen that the design of these will be radically different.

  • IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems

    This guide is applicable to all stand-alone photovoltaic (PV) systems where PV is the only charging source. Stand-alone PV system parameters and operating conditions are discussed in relation to battery characteristics and expected system performance. Charging parameters for PV systems are suggested to help in the selection of a battery for a specific application. Finally, a performance test to verify the battery selection and system parameters is provided, including discussions on how to interpret test results. Test results only provide information on initial battery performance. No cycle-life predictions are made.

  • Discussion on “a new large generator for Niagara Falls”, application of fractional-pitch windings to alternating-current generators”, and “modern developments in single-phase generators.” Atlantic city, N. J., July 1, 1908

    Wm. J. Foster: There are two or three points in connection with the generator described by Mr. Behrend to which I would like to call attention. I think that in many respects it is a most remarkable machine. The efficiency as given by Mr. Behrend in the tabulation is something unusual, when we consider that it is a generator of 12,000 volts. I would like to point out how, in my opinion, the high efficiency has been attained.

  • Time domain simulations of the CLIC PETS (power extraction and transfer structure) with GdfidL

    The Compact Linear Collider (CLIC) PETS is required to produce about 0.5 GW RF power per metre in the 30 GHz CLIC decelerator when driven by the high current beam (/spl sim/ 270 A). To avoid beam break-up in the decelerator it is necessary to provide strong damping of the transverse deflecting modes. A PETS geometry with a level of damping consistent with stable drive beam operation has been designed, using the frequency domain code HFSS. A verification of the overall performance of this structure has been made recently using the code GdfidL, which permits a very fine mesh analysis of a full-length structure in the time domain. This paper gives the results of this analysis.

  • Bond graph model for prognosis and health management of mechatronic systems based on energy activity

    Timely and accurate, detection and prediction, of fault is beneficial for every safety. However, it is a necessity for modern autonomous systems like autonomous vehicles and robots due to the absence of continuous human supervision. This paper attempts to establish energy as a viable parameter for fault identification. For this Element Activity Index is used as a metric for identification, calculated in this paper using only the sensor data. The proposed technique is then implemented on a bicycle vehicle dynamic model. Abrupt faults of different intensities are introduces in different elements of the model and their proper detection and isolation is checked using the proposed technique. The visibly different residual trends allows us for accurately detect the presence and also the location of the fault.

  • Consideration on Damper Cylinder Design for Effectiveness of Superconducting Generator

    Superconducting generators (SCGs) have many features such as high generation efficiency, small size, capability to enhance power system stability, and so on. Introduction of SCGs will offer great benefits to electric power systems. Appropriate design is necessary for SCGs to demonstrate these beneficial effects. There are some former studies on explicit expressions on relations between electrical or mechanical characteristics and structure-parameters of SCGs. Obtained expressions gave good view of generator characteristics. In this study, approximations used in the expressions are modified for recent design of damper cylinders. Some consideration on design of damper cylinders for SCGs is discussed as well

  • Simulation of dynamic performance for cycloconverter-fed synchronous motor (CFSM)

    A mathematical model of a cycloconverter-fed synchronous motor (CFSM) drive system with air-gap flux-oriented control is made. On this basis, a set of software is developed by using the object-oriented programming (OOP) method to simulate the dynamic performance of the CFSM. Three processes are simulated- speed sudden reversion, load step-up change and flux-weakening operation. At the same time, the losses of damper windings are calculated. Using these results, this paper explains the influences of damper bars in the dynamic process. Finally, the design rules for damper windings of a CFSM system are presented.

  • Design of Test Structures for Reduced Order Modeling of the Squeeze Film Damping in Mems

    In this work the effect of the squeeze film damping on MEMS structures is studied. As the simulation of the microsystems involves different physical domains, the analysis with numerical methods can turn out remarkably onerous such as when, due to technological reasons, the membrane is built with several holes. In this case the reduced order modeling is preferable. In the present work the non-linear coefficients of equivalent damping and stiffness by finite element models are investigated to be exported in a reduced order model. By means of numerical finite element calculation is studied the sensitivity analysis related to design parameters such as dimension of the plate and the presence, or lack, of holes

  • Damping Control Study of the Drive Train of DFIG Wind Turbine

    In this paper, damping controller for dynamic and transient control of a variable speed wind turbine is presented. The phenomenon of drive train oscillations in wind turbines is discussed. It is illustrated how the damping controller is able to reduce the oscillations of the drive train significantly and mitigate fatigue damage due to drive train oscillations we studied the effect of damping controller on the natural frequency associated with drive train torsional oscillations and its impact on drive train damper design.



Standards related to Shock absorbers

Back to Top

No standards are currently tagged "Shock absorbers"


Jobs related to Shock absorbers

Back to Top