Conferences related to Shape measurement

Back to Top

2021 IEEE Pulsed Power Conference (PPC)

The Pulsed Power Conference is held on a biannual basis and serves as the principal forum forthe exchange of information on pulsed power technology and engineering.


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted papers will be peer reviewed. Accepted high quality papers will be presented in oral and postersessions, will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


More Conferences

Periodicals related to Shape measurement

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


More Periodicals

Most published Xplore authors for Shape measurement

Back to Top

Xplore Articles related to Shape measurement

Back to Top

Identifying spurious modes in RF-MEMS resonators using photoelastic imaging

2018 IEEE Micro Electro Mechanical Systems (MEMS), 2018

This paper reports the first use of dynamic photoelastic imaging for identifying in-plane vibration modes in high-frequency MEMS resonators. In a set of width-extensional mode resonators (WE-BARs), we map fundamental width- extensional modes ω(01)and unwanted higher-order spurious length-extensional modes ω(i, 0). In addition, we detect unexpected spurious modes `ωχ' for all designs that are potentially detrimental due to their proximity ...


An approach to modelling of magnetically excited forces in electrical machines

Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation, 1992

None


Tracking rectangular and elliptical extended targets using laser measurements

14th International Conference on Information Fusion, 2011

This paper considers tracking of extended targets using data from laser range sensors. Two types of extended target shapes are considered, rectangular and elliptical, and a method to compute predicted measurements and corresponding innovation covariances is suggested. The proposed method can easily be integrated into any tracking framework that relies on the use of an extended Kalman filter. Here, it ...


8.5-GHz pulse-shape control with a 700:1 Dynamic range on a frequency-tripled multiterawatt solid-state laser

2006 Conference on Lasers and Electro-Optics and 2006 Quantum Electronics and Laser Science Conference, 2006

Precise control of new pulse shapes on the OMEGA laser requires 8.5-GHz, 740:1 dynamic-range measurements at the low-energy front end of the system. We present a new integrated measurement and prediction scheme that meets these demands.


A Study of Measures for Contour-based Recognition and Localization of Known Objects in Digital Images

2018 Eighth International Conference on Image Processing Theory, Tools and Applications (IPTA), 2018

Usually, the most important structures in an image are extracted by an edge detector. Once extracted edges are binarized, they represent the shape boundary information of an object. For the edge-based localization/matching process, the differences between a reference edge map and a candidate image are quantified by computing a performance measure. This study investigates supervised contour measures for determining the ...


More Xplore Articles

Educational Resources on Shape measurement

Back to Top

IEEE.tv Videos

IMS 2011 Microapps - A Comparison of Noise Parameter Measurement Techniques
IMS 2011 Microapps - Ultra Low Phase Noise Measurement Technique Using Innovative Optical Delay Lines
IMS 2011 Microapps - Waveguide Characteristics and Measurement Errors
IMS 2011 Microapps - Vector-Receiver Load Pull - Measurement Accuracy at its Best
IEEE Future Networks Initiative - Academia and Industry Shaping and Evolving the Future
IMS 2012 Microapps - Passive Intermodulation (PIM) measurement using vector network analyzer Osamu Kusano, Agilent CTD-Kobe
APEC 2012 - Thomas S. Buzak Plenary
DROP: The Durable Reconnaissance and Observation Platform
5G Wireless A Measurement and Metrology Perspective: MicroApps 2015 - Keysight Technologies
I2MTC 2014 Conference Preview
Ignite! Session: John Walz
2011 IEEE Honors Ceremony
What is the PSMA Power Technology Roadmap? APEC 2013 KeyTalk with Eric Persson
MicroApps: Recent Improvement on Y-Factor Noise Figure Measurement Uncertainty (Agilent Technologies)
MicroApps: Measurement Advances for Differential and I/Q Devices (Agilent Technologies)
Micro-Apps Keynote 2013: Modern RF Measurements and How They Drive Spectrum Analyzer Digital IF Processor Design
Making 5G NR a Reality - Durga Malladi: Brooklyn 5G Summit 2017
Handling of a Single Object by Multiple Mobile Robots based on Caster-Like Dynamics
DoD CIO Brief to JHU APL IEEE 5G Summit - Frederick Moorefield - 5G Technologies for Tactical and First Responder Networks 2018
Closing Remarks: Oleg Logvinov - ETAP Tel Aviv 2015

IEEE-USA E-Books

  • Identifying spurious modes in RF-MEMS resonators using photoelastic imaging

    This paper reports the first use of dynamic photoelastic imaging for identifying in-plane vibration modes in high-frequency MEMS resonators. In a set of width-extensional mode resonators (WE-BARs), we map fundamental width- extensional modes ω(01)and unwanted higher-order spurious length-extensional modes ω(i, 0). In addition, we detect unexpected spurious modes `ωχ' for all designs that are potentially detrimental due to their proximity to w(0,1). We show the dependence of both intended modes and spurious modes on aspect ratio and discuss methods of mitigation for the latter. It is shown that the photoelastic technique is broadly applicable to high-resolution mapping and identification of vibration modes in MEMS resonators.

  • An approach to modelling of magnetically excited forces in electrical machines

    None

  • Tracking rectangular and elliptical extended targets using laser measurements

    This paper considers tracking of extended targets using data from laser range sensors. Two types of extended target shapes are considered, rectangular and elliptical, and a method to compute predicted measurements and corresponding innovation covariances is suggested. The proposed method can easily be integrated into any tracking framework that relies on the use of an extended Kalman filter. Here, it is used together with a recently proposed Gaussian mixture probability hypothesis density (GM-PHD) filter for extended target tracking, which enables estimation of not only position, orientation, and size of the extended targets, but also estimation of extended target type (i.e. rectangular or elliptical). In both simulations and experiments using laser data, the versatility of the proposed tracking framework is shown. In addition, a simple measure to evaluate the extended target tracking results is suggested.

  • 8.5-GHz pulse-shape control with a 700:1 Dynamic range on a frequency-tripled multiterawatt solid-state laser

    Precise control of new pulse shapes on the OMEGA laser requires 8.5-GHz, 740:1 dynamic-range measurements at the low-energy front end of the system. We present a new integrated measurement and prediction scheme that meets these demands.

  • A Study of Measures for Contour-based Recognition and Localization of Known Objects in Digital Images

    Usually, the most important structures in an image are extracted by an edge detector. Once extracted edges are binarized, they represent the shape boundary information of an object. For the edge-based localization/matching process, the differences between a reference edge map and a candidate image are quantified by computing a performance measure. This study investigates supervised contour measures for determining the degree to which an object shape differs from a desired position. Therefore, several distance measures are evaluated for different shape alterations: translation, rotation and scale change. Experiments on both synthetic and real images exhibit which measures are accurate enough for an object pose or matching estimation, useful for robot task as to refine the object pose.

  • Using Line Features In Incremental Depth Estimation

    None

  • Three-dimensional reconstruction of implanted aortic stents using computed tomography

    Patients with infrarenal atherosclerotic obstructions were examined by spiral- CT before and after stent implantation. This CT data was segmented and the vessel structures as well as the stent were reconstructed. The visualization using the AVS software allows a fast and comfortable manipulation and display of the calculated 3D objects. Even the integration of the original CT data and animations are possible. These 3D reconstructions enable the accurate assessment of the vessel and stent geometry, the stent location relative to stenosis, dissection, plaque or calcification and help to identify potential stent displacements. Thus, spiral-CT has become a comparative and competitive modality to conventional angiography in the pre-interventional planning and control of stent placement.

  • A quarter-wave phase-stepping algorithm for fiber-optic electronic speckle pattern interferometry using zero-crossing triggers

    An efficient phase-stepping method for the use in fiber-optic electronic speckle pattern interferometry is proposed. A fiber-optic Michelson interferometer is phase-modulated, and the zero-crossing points of a back- reflected interference signal, that have consecutive pi phase difference, are used to trigger the charged-coupled device camera to capture specklegrams with pi/2 phase difference. A phase error of less than 3 mrad with 100-Hz image capture speed has been obtained in an open-loop configuration. Also, it has been experimentally shown that the phase-stepping accuracy of the proposing method does not depend on the nonlinear actions of the phase modulator

  • Precise control of 3ω pulse-shape in high-power laser facility

    We demonstrate precise control of 0.35-mum-wavelength pulse-shape in SG-III prototype facility. We calculate firstly 1.053-mum-wavelength pulses from the amplifier system and other parameters. Then the required 0.35-um shaped pulse has been produced after 2 or 3 shots.

  • Measurement of the 3-D shape of specular polyhedrons using an M-array coded light source

    In this paper we describe a method for measuring three-dimensional shape of specular polyhedron by using an M-array coded light source. Determination of a shape of specular surface is important especially for industrial applications. However, owing to specular reflection, it is difficult to measure the shape of specular surfaces by applying the methods for diffusing surfaces. We reconstruct the shape of specular objects from the image of M-array coded light source observed after being reflected by the object. Using the "window property" of M-array, the correspondence is found between a point on the image of reflected light source and a point on light source. By assuming that the surface is locally a plane, normal vectors of the surface are determined from the correspondence, and three-dimensional shape of the surface is reconstructed. This method enables us to measure the shape of specular polyhedron by using a simple equipment. The method was tested for a polyhedron of 10 cm of each side, 50 cm apart from the camera. The shape of the polyhedron was reconstructed correctly. The precision of the measurement was about 1 mm.<<ETX>>



Standards related to Shape measurement

Back to Top

IEEE Guide for Gas-Insulated Substations

This guide provides information of special relevance to the planning, design, testing, installation, operation and maintenance of gas-insulated substations(GIS) and equipment. This guide is intended to supplement IEEE Std C37-122- 1993(R2002). In general, this guide is applicable to all GIS above 52 kV. However the importance of the topics covered varies with application category. For example, issues related to advanced ...


IEEE Standard Test Procedures for Semiconductor X-Ray Energy Spectrometers



Jobs related to Shape measurement

Back to Top