Conferences related to Sawing machines

Back to Top

2021 IEEE Pulsed Power Conference (PPC)

The Pulsed Power Conference is held on a biannual basis and serves as the principal forum forthe exchange of information on pulsed power technology and engineering.


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

CVPR is the premier annual computer vision event comprising the main conference and several co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry researchers.

  • 2019 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premier annual computer vision event comprising the main conference and severalco-located workshops and short courses. With its high quality and low cost, it provides anexceptional value for students, academics and industry researchers.

  • 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premier annual computer vision event comprising the main conference and several co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry researchers.

  • 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conferenceand 27co-located workshops and short courses. With its high quality and low cost, it provides anexceptional value for students,academics and industry.

  • 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conference and 27 co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry.

  • 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    computer, vision, pattern, cvpr, machine, learning

  • 2014 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conference and 27 co-located workshops and short courses. Main conference plus 50 workshop only attendees and approximately 50 exhibitors and volunteers.

  • 2013 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    CVPR is the premiere annual Computer Vision event comprising the main CVPR conference and 27 co-located workshops and short courses. With its high quality and low cost, it provides an exceptional value for students, academics and industry.

  • 2012 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Topics of interest include all aspects of computer vision and pattern recognition including motion and tracking,stereo, object recognition, object detection, color detection plus many more

  • 2011 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Sensors Early and Biologically-Biologically-inspired Vision, Color and Texture, Segmentation and Grouping, Computational Photography and Video

  • 2010 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Concerned with all aspects of computer vision and pattern recognition. Issues of interest include pattern, analysis, image, and video libraries, vision and graphics, motion analysis and physics-based vision.

  • 2009 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

    Concerned with all aspects of computer vision and pattern recognition. Issues of interest include pattern, analysis, image, and video libraries, vision and graphics,motion analysis and physics-based vision.

  • 2008 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

  • 2007 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

  • 2006 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

  • 2005 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)


2020 IEEE International Conference on Image Processing (ICIP)

The International Conference on Image Processing (ICIP), sponsored by the IEEE SignalProcessing Society, is the premier forum for the presentation of technological advances andresearch results in the fields of theoretical, experimental, and applied image and videoprocessing. ICIP 2020, the 27th in the series that has been held annually since 1994, bringstogether leading engineers and scientists in image and video processing from around the world.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


More Conferences

Periodicals related to Sawing machines

Back to Top

Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Audio, Speech, and Language Processing, IEEE Transactions on

Speech analysis, synthesis, coding speech recognition, speaker recognition, language modeling, speech production and perception, speech enhancement. In audio, transducers, room acoustics, active sound control, human audition, analysis/synthesis/coding of music, and consumer audio. (8) (IEEE Guide for Authors) The scope for the proposed transactions includes SPEECH PROCESSING - Transmission and storage of Speech signals; speech coding; speech enhancement and noise reduction; ...


Automation Science and Engineering, IEEE Transactions on

The IEEE Transactions on Automation Sciences and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. We welcome results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, ...


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


Communications Surveys & Tutorials, IEEE

Each tutorial reviews currents communications topics in network management and computer and wireless communications. Available tutorials, which are 2.5 to 5 hours in length contains the original visuals and voice-over by the presenter. IEEE Communications Surveys & Tutorials features two distinct types of articles: original articles and reprints. The original articles are exclusively written for IEEE Communications Surveys & Tutorials ...


More Periodicals

Most published Xplore authors for Sawing machines

Back to Top

Xplore Articles related to Sawing machines

Back to Top

Superhigh electromechanical coupling for acoustic plate waves in potassium niobate

1999 IEEE Ultrasonics Symposium. Proceedings. International Symposium (Cat. No.99CH37027), 1999

The characteristics of acoustic waves propagating in thin plates of single crystal potassium niobate are theoretically investigated. It is found that acoustic plate waves can provide extremely high values of electromechanical coupling. For example, values of Δv/v, the fractional velocity change produced by electrical shorting of the surface, as high as 0.5 can be obtained with the shear horizontal (SH0) ...


Miniature, high efficiency transducers for use in ultrasonic flow meters

IEEE Ultrasonics Symposium, 2004, 2004

This paper describes development of a novel, high efficiency transducer for use in ultrasonic flow meters. It is based on conversion of energy between surface acoustic waves (SAWs) and bulk acoustic wave (BAWs). The transducer consists of thin plate of a suitable piezoelectric material whose SAW velocity is greater than velocity of BAW in the fluid. Under these conditions a ...


Evaluation of Scattering Loss in Polycrystalline Materials by Line-Focus-Beam Acoustic Microscope

IEEE 1985 Ultrasonics Symposium, 1985

None


Influence of machine configuration on EOS damage during wafer cleaning process

2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD), 2016

An investigation was carried out on the charging voltage of deionized (DI) water during wafer cleaning at wafer sawing process, since it was supposed to be the root cause for EOS damages during semiconductor production. The charging voltage was measured using a non-contact electrostatic field meter. It was found that the positioning of the water filter influenced the amount of ...


Giant peak in the specefic heat of selectively deuterated (DMe-DCNQI)/sub 2/Cu

International Conference on Science and Technology of Synthetic Metals, 1994

None


More Xplore Articles

Educational Resources on Sawing machines

Back to Top

IEEE-USA E-Books

  • Superhigh electromechanical coupling for acoustic plate waves in potassium niobate

    The characteristics of acoustic waves propagating in thin plates of single crystal potassium niobate are theoretically investigated. It is found that acoustic plate waves can provide extremely high values of electromechanical coupling. For example, values of Δv/v, the fractional velocity change produced by electrical shorting of the surface, as high as 0.5 can be obtained with the shear horizontal (SH0) wave. The influence of a thin conducting layer on the velocity and attenuation of plate waves is investigated. It is shown that variations in these parameters as high as 50% and 30 dB per wavelength can be achieved for change in layer sheet conductance from 10-7to 10-5S.

  • Miniature, high efficiency transducers for use in ultrasonic flow meters

    This paper describes development of a novel, high efficiency transducer for use in ultrasonic flow meters. It is based on conversion of energy between surface acoustic waves (SAWs) and bulk acoustic wave (BAWs). The transducer consists of thin plate of a suitable piezoelectric material whose SAW velocity is greater than velocity of BAW in the fluid. Under these conditions a surface wave traveling on the substrate radiates a bulk acoustic wave in the fluid. We show that with proper design efficient conversion of energy from SAW to BAW and vice versa can be obtained. For example. using lead zirconate titanate (PZT) as the piezoelectric material and water as the fluid, total conversion loss (SAW to BAW and back from BAW to SAW) of less than 3 dB has been obtained.

  • Evaluation of Scattering Loss in Polycrystalline Materials by Line-Focus-Beam Acoustic Microscope

    None

  • Influence of machine configuration on EOS damage during wafer cleaning process

    An investigation was carried out on the charging voltage of deionized (DI) water during wafer cleaning at wafer sawing process, since it was supposed to be the root cause for EOS damages during semiconductor production. The charging voltage was measured using a non-contact electrostatic field meter. It was found that the positioning of the water filter influenced the amount of charging voltage of DI water.

  • Giant peak in the specefic heat of selectively deuterated (DMe-DCNQI)/sub 2/Cu

    None

  • Elementary surface acoustic wave effects studied by scanning acoustic force microscopy

    Scanning Acoustic Force Microscopy (SAFM) has been used to study elementary surface acoustic wave phenomena with nanoscale spatial resolution. The SAFM technique is capable of detecting acoustic wave properties of arbitrarily polarized modes with sub-wavelength resolution and unmatched sensitivity. Elementary model systems like symmetric single finger wave sources and circular wave sources are studied for the first time in detail.

  • Experimental Study Of Reflecting Bragg Structures Capable Of Linear Compression Of SAWs

    None

  • Phase velocity measurement of in-plane polarized surface acoustic waves with high spatial resolution

    In this paper we present a new method that allows the measurement of the phase velocity of in-plane polarized SAWs with high spatial resolution. The capabilities of the scanning acoustic force microscope had to be extended by the analysis of torsional cantilever motion. A nonlinear coupling mechanism between in-plane oscillations and this movement could be found, that allows an mechanical mixing of in-plane SAWs. Phase velocity measurements of Love waves on the system Au/SiO/sub 2//ST-quartz are presented. A good agreement with theoretical predictions for the velocities could be found.

  • Non-invasive osteotomy using focused ultrasound

    Surgical reconstruction of bony defects such as Rotational Acetabular Osteotomy (RAO) in the orthopedics field involves the operation of bony cutting using surgical saws or drills. Operators have to incise skin and open the muscular system under anesthesia to make the bone visible, and this causes patients great pain and marks after the operation. So a system of bony cutting using focused ultrasound without incising the skin has been developed. The ultrasound energy and the high pressure caused by cavitation generated by the minus vapor pressure ablates the focus area of the bone. An experiment of ablating the surface of a pig's bone by ultrasound was carried out in various irradiation conditions. At a high oscillating frequency, in the case of continuum waves, the mark of ablation without thermal damage was found at the focal point and the size was the same as the convergence beam area of the ultrasonic wave. In addition, ultrasonic propagation in the living body which consists of multiple organizations was analyzed using the time-domain finite element method. In comparison with the experimental result, some important parameters relating to the cause of thermal damage at the focus on the bone were specified.

  • Myths die hard-Why?

    The author defines a myth as a falsehood perpetuated by a population that chooses not to investigate the underlying truth. He points out that the myth that aerospace engineers are nonproductive in nondefense work hurts the profession. He examines the mechanism used in promoting myths and finds that some myth perpetuators, including the ones that perpetuated the aerospace- engineer myth, are well-compensated for their services. Substantial financial rewards are also seen to be available to those who can correctly recognize the falsehood in myths.<<ETX>>



Standards related to Sawing machines

Back to Top

No standards are currently tagged "Sawing machines"


Jobs related to Sawing machines

Back to Top