Conferences related to Ovens

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 IEEE 17th Annual Consumer Communications & Networking Conference (CCNC)

IEEE CCNC 2020 will present the latest developments and technical solutions in the areas of home networking, consumer networking, enabling technologies (such as middleware) and novel applications and services. The conference will include a peer-reviewed program of technical sessions, special sessions, business application sessions, tutorials, and demonstration sessions.


2020 IEEE 21st International Conference on Vacuum Electronics (IVEC)

Technical presentations will range from the fundamental physics of electron emission and modulated electron beams to the design and operation of devices at UHF to THz frequencies, theory and computational tool development, active and passive components, systems, and supporting technologies.System developers will find that IVEC provides a unique snapshot of the current state-of-the-art in vacuum electron devices. These devices continue to provide unmatched power and performance for advanced electromagnetic systems, particularly in the challenging frequency regimes of millimeter-wave and THz electronics.Plenary talks will provide insights into the history, the broad spectrum of fundamental physics, the scientific issues, and the technological applications driving the current directions in vacuum electronics research.


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


More Conferences

Periodicals related to Ovens

Back to Top

Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Automation Science and Engineering, IEEE Transactions on

The IEEE Transactions on Automation Sciences and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. We welcome results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Consumer Electronics, IEEE Transactions on

The design and manufacture of consumer electronics products, components, and related activities, particularly those used for entertainment, leisure, and educational purposes


Dielectrics and Electrical Insulation, IEEE Transactions on

Electrical insulation common to the design and construction of components and equipment for use in electric and electronic circuits and distribution systems at all frequencies.


More Periodicals

Most published Xplore authors for Ovens

Back to Top

Xplore Articles related to Ovens

Back to Top

Discussion on “the future of electric heating and cooking in marine service,” (Mauger), New York, May 19, 1914. (see proceedings for May, 1914)

Proceedings of the American Institute of Electrical Engineers, 1914

W. S. Hadaway: In reading this paper of Mr. Mauger's, the first omission that strikes me is the practical elimination of the electric laundry on board ship. It has been my experience that the adoption of electrically heated laundry machines, such as body ironers, combination ironers, as well as hand irons are an essential part of the equipment for the ...


Using a Shielded Room to Characterize UDP Performance in the Presence of Interference in IEEE 802.11 Wireless Networks

2008 3rd IEEE Symposium on New Frontiers in Dynamic Spectrum Access Networks, 2008

It is critical to understand the effect of wireless interference so that we can better utilize the spectrum through dynamic allocation methods. This paper presents the results of an experimental study done to characterize UDP performance in wireless networks in the presence of interference. We have carried out experiments in a Shielded Room facility using three different interference sources. A ...


Research on the applications of dielectric ceramic in microwave oven

Proceedings of the 2010 Symposium on Piezoelectricity, Acoustic Waves and Device Applications, 2010

The attributes of microwave dielectric ceramic have been studied from two aspects: working state and relative dielectric constant. Its four applications in microwave oven are elicited. Ceramics in resonant state can be used in microwave oven of fixed boundary condition; ceramics in detuned state are made into shimming panel; high permittivity ceramics are used to make flexible fast defroster and ...


Separating Functional and Dependability Requirements of Embedded Systems

2010 10th IEEE International Conference on Computer and Information Technology, 2010

This paper is motivated by the challenge to traditional development process of embedded systems from the evolution of dependability requirements, which leads to manual analysis and revision of system designs at design-time or post- implementation at a high cost, especially when the target system is complex or large. This paper proposes a complementary methodology, namely the model monitoring approach, to ...


An experimental study of interference impacts on ZigBee-based wireless communication inside buildings

2010 IEEE International Conference on Mechatronics and Automation, 2010

ZigBee is a wireless technology developed as an open global standard to address the unique needs of low-cost, low-power wireless sensor networks. This standard takes full advantages of the IEEE 802.15.4 physical radio specification and operates in unlicensed bands (e.g., 2.4 GHz) worldwide at different frequencies. As more and more companies make products that use the 2.4 GHz portion of ...


More Xplore Articles

Educational Resources on Ovens

Back to Top

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Ovens"

IEEE-USA E-Books

  • Discussion on “the future of electric heating and cooking in marine service,” (Mauger), New York, May 19, 1914. (see proceedings for May, 1914)

    W. S. Hadaway: In reading this paper of Mr. Mauger's, the first omission that strikes me is the practical elimination of the electric laundry on board ship. It has been my experience that the adoption of electrically heated laundry machines, such as body ironers, combination ironers, as well as hand irons are an essential part of the equipment for the comfort of the men on an extended cruise.

  • Using a Shielded Room to Characterize UDP Performance in the Presence of Interference in IEEE 802.11 Wireless Networks

    It is critical to understand the effect of wireless interference so that we can better utilize the spectrum through dynamic allocation methods. This paper presents the results of an experimental study done to characterize UDP performance in wireless networks in the presence of interference. We have carried out experiments in a Shielded Room facility using three different interference sources. A controlled interference source was used to generate continuous interference along with two known interference sources: a microwave oven and a FHSS phone. The impact of these interference sources on UDP has been quantified. The results obtained from experiments done inside the Shielded Room are compared with results from those done outside. The implications of using the Shielded Room as an experimental environment are discussed.

  • Research on the applications of dielectric ceramic in microwave oven

    The attributes of microwave dielectric ceramic have been studied from two aspects: working state and relative dielectric constant. Its four applications in microwave oven are elicited. Ceramics in resonant state can be used in microwave oven of fixed boundary condition; ceramics in detuned state are made into shimming panel; high permittivity ceramics are used to make flexible fast defroster and low permittivity ceramics are used in multiple outputs shimming device in microwave oven. Currently, all these applications have been applied for national invention patents, some of which have been produced into samples and got favorable test data.

  • Separating Functional and Dependability Requirements of Embedded Systems

    This paper is motivated by the challenge to traditional development process of embedded systems from the evolution of dependability requirements, which leads to manual analysis and revision of system designs at design-time or post- implementation at a high cost, especially when the target system is complex or large. This paper proposes a complementary methodology, namely the model monitoring approach, to fill in the gap between the evolution of dependability requirements and traditional development process. The novel approach models functional and dependability requirements separately, and contains two alternative implementation techniques: model monitoring and model generating. The paper illustrates the methodology with examples and comparison with the model checking approach, to show better support of the evolution throughout the life-cycle at a lower cost.

  • An experimental study of interference impacts on ZigBee-based wireless communication inside buildings

    ZigBee is a wireless technology developed as an open global standard to address the unique needs of low-cost, low-power wireless sensor networks. This standard takes full advantages of the IEEE 802.15.4 physical radio specification and operates in unlicensed bands (e.g., 2.4 GHz) worldwide at different frequencies. As more and more companies make products that use the 2.4 GHz portion of the radio spectrum, network designers have had to deal with increased signals from collocated networks operating over the same frequency range. This paper aims to highlight the issues affecting co-existence of ZigBee systems in the presence of different interferences. We present an experimental study of ZigBee-based wireless communication over a period of time with WiFi, BlueTooth and microwave ovens. Results are presented for several different link configurations. Based on observations of the Packet Error Rate, we propose interference prediction algorithms to explore the impacts of WiFi/microwave oven on ZigBee communications.

  • Theoretical and experimental study of cooking regions for shell eggs in a domestic Microwave oven

    Microwave heating has been considered for in-shell egg cooking without explosions. Locations inside Microwave oven cavity suitable for cooking eggs without explosions in a domestic microwave oven working at 2450 MHz were identified. By operating the oven at different powers and time interval the level of cooking was monitored. The spots where the albumen got cooked fast and started to splatter was noted as high energy points. The spots where the albumin got less cooked were marked as points of low energy. Next a full egg with shell was placed at the low energy point and the oven is operated at 40% power for 2 minutes. The egg was found well cooked and there was no explosion.

  • Investigation of suitability of operating frequency and electro technical modeling of microwave oven

    This paper is about electro-technical modeling of microwave oven. The aim of the work is to investigate the suitability of the operating frequency and to investigate why food which has been warmed in a microwave oven often requires a non-uniform temperature distribution. This would be done by making an electromagnetic model that determines the field distribution and the heat transfer to the food, as well as a thermal model that describes the heat transfer between different parts of the food.

  • Measured and simulated frequency spectra of the household microwave oven

    Frequency spectra of the magnetron of the Whirlpool - Talent microwave oven with a cuboidal glass object located in the centre of the turntable are measured with a spectrum analyser for different angular positions of the object. Then, electromagnetic software is used to calculate the amplitude of the reflection coefficient as a function of frequency in the frequency band between 2.4 GHz and 2.5 GHz, for different angular positions of the glass object. By comparing calculated resonant frequencies with the measured leakage characteristics, conclusions regarding the actual operating frequency of the microwave oven are drawn. This provides valuable suggestions for further modelling activities in the area of microwave power applications.

  • Vacua

    The purpose of this article is to publish a few observations made in the research laboratory on some phenomena in vacua, as they may possibly be of interest to others who are working in the field of evacuated apparatus.

  • JamLab: Augmenting sensornet testbeds with realistic and controlled interference generation

    Radio interference drastically affects the performance of sensor-net communications, leading to packet loss and reduced energy-efficiency. As an increasing number of wireless devices operates on the same ISM frequencies, there is a strong need for understanding and debugging the performance of existing sensornet protocols under interference. Doing so requires a low-cost flexible testbed infrastructure that allows the repeatable generation of a wide range of interference patterns. Unfortunately, to date, existing sensornet testbeds lack such capabilities, and do not permit to study easily the coexistence problems between devices sharing the same frequencies. This paper addresses the current lack of such an infrastructure by using off-the- shelf sensor motes to record and playback interference patterns as well as to generate customizable and repeat-able interference in real-time. We propose and develop JamLab: a low-cost infrastructure to augment existing sensornet testbeds with accurate interference generation while limiting the overhead to a simple upload of the appropriate software. We explain how we tackle the hardware limitations and get an accurate measurement and regeneration of interference, and we experimentally evaluate the accuracy of JamLab with respect to time, space, and intensity. We further use JamLab to characterize the impact of interference on sensornet MAC protocols.



Standards related to Ovens

Back to Top

No standards are currently tagged "Ovens"


Jobs related to Ovens

Back to Top