Conferences related to Optical design

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


More Conferences

Periodicals related to Optical design

Back to Top

Advanced Packaging, IEEE Transactions on

The IEEE Transactions on Advanced Packaging has its focus on the modeling, design, and analysis of advanced electronic, photonic, sensors, and MEMS packaging.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Engineering, IEEE Reviews in

The IEEE Reviews in Biomedical Engineering will review the state-of-the-art and trends in the emerging field of biomedical engineering. This includes scholarly works, ranging from historic and modern development in biomedical engineering to the life sciences and medicine enabled by technologies covered by the various IEEE societies.


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


More Periodicals

Most published Xplore authors for Optical design

Back to Top

Xplore Articles related to Optical design

Back to Top

Phased array beam spoiling technique

IEEE Antennas and Propagation Society International Symposium 1997. Digest, 1997

The phased array beam spoiling technique, described in this paper, is not new technology. It is simply based on the decades-old ray optics technique that was used in the design of cosecant-squared reflector antennas. However, conversations with other antenna engineers on the subject led the author to conclude that the utility of this technique for the dynamic control of phased ...


Design techniques for subcarrier multiplexed broadcast optical networks

IEEE Journal on Selected Areas in Communications, 1990

Design techniques which enable the performance of subcarrier multiplexed FM broadcast optical networks to be optimized at the planning stage are described. At the transmitter node, criteria for maximizing the subscriber carrier-to-noise ratio (CNR) are presented. At the subscriber node, it is shown that under the majority of circumstances, the optimum direct detection receiver consists of a low-noise III-V avalanche ...


Optics for EUV lithography

Digest of Papers Microprocesses and Nanotechnology 2000. 2000 International Microprocesses and Nanotechnology Conference (IEEE Cat. No.00EX387), 2000

Extreme Ultraviolet Lithography (EUVL), using 13 nm radiation, has a high probability to become the Next Generation Lithography of choice for resolutions of 50 nm and below. The work at CARL ZEISS focusses on the development of optical system design and core technologies necessary for the industrialization of EUVL optical systems.


Bend insensitive fiber design strategies

2008 Asia Optical Fiber Communication & Optoelectronic Exposition & Conference, 2008

Robust bending sensitivity of optical fiber can enable its low cost deployment deep into the telecom network. We will discuss the bending loss of single mode optical fibers and design techniques to improve bending sensitivity.


A double-SLM technique for designing arbitrary optical trapping patterns

CLEO/Europe - EQEC 2009 - European Conference on Lasers and Electro-Optics and the European Quantum Electronics Conference, 2009

There exist efficient algorithms (such as for instance the Gerchberg-Saxton algorithm) to calculate a phase hologram that will construct a desired intensity distribution in a given plane when displayed as a gray- value pattern on a spatial light modulator (SLM). The process, however, typically scrambles the phase.


More Xplore Articles

Educational Resources on Optical design

Back to Top

IEEE.tv Videos

An Energy-efficient Reconfigurable Nanophotonic Computing Architecture Design: Optical Lookup Table - IEEE Rebooting Computing 2017
An Integrated Optical Parallel Multiplier Exploiting Approximate Binary Logarithms - Jun Shiomi - ICRC 2018
Real-time Spectrogram Analysis of Continuous Optical Wavefields - José Azaña - Closing Ceremony, IPC 2018
Turning Research Into a Real Product - Simon Poole - IPC 2018
Lighting the Way: Optical Sensors in the Life Sciences
Multi-Level Optimization for Large Fan-In Optical Logic Circuits - Takumi Egawa - ICRC 2018
IMS 2011 Microapps - Ultra Low Phase Noise Measurement Technique Using Innovative Optical Delay Lines
On-chip Passive Photonic Reservoir Computing with Integrated Optical Readout - IEEE Rebooting Computing 2017
Multi-Level Optical Weights in Integrated Circuits - IEEE Rebooting Computing 2017
Spatial-Spectral Materials for High Performance Optical Processing - IEEE Rebooting Computing 2017
Testing 5G: OTA and the Connectorless World - IMS 2017
Demonstration of a Coherent Tunable Amplifier for All-Optical Ising Machines: IEEE Rebooting Computing 2017
Towards On-Chip Optical FFTs for Convolutional Neural Networks - IEEE Rebooting Computing 2017
Semiconductor Laser Development at Hisense Photonics - Yanfeng Lao - IPC 2018
Kees Immink, 2017 IEEE Medal of Honor
Scalable and Reconfigurable Tap-Delay-Line for Multichannel Equalization - Ari Willner - Closing Ceremony, IPC 2018
Multiplication with Fourier Optics Simulating 16-bit Modular Multiplication - Abigail Timmel - ICRC 2018
IMS 2011 Microapps - Online Design
An IEEE IPC Special Session with Kasia Balakier of UCL
Q&A with Bruce Kraemer: IEEE Rebooting Computing Podcast, Episode 24

IEEE-USA E-Books

  • Phased array beam spoiling technique

    The phased array beam spoiling technique, described in this paper, is not new technology. It is simply based on the decades-old ray optics technique that was used in the design of cosecant-squared reflector antennas. However, conversations with other antenna engineers on the subject led the author to conclude that the utility of this technique for the dynamic control of phased array patterns is often not understood and not utilized. In spite of its simplicity and lack of mathematical elegance, it has proven to be quite useful in certain applications.

  • Design techniques for subcarrier multiplexed broadcast optical networks

    Design techniques which enable the performance of subcarrier multiplexed FM broadcast optical networks to be optimized at the planning stage are described. At the transmitter node, criteria for maximizing the subscriber carrier-to-noise ratio (CNR) are presented. At the subscriber node, it is shown that under the majority of circumstances, the optimum direct detection receiver consists of a low-noise III-V avalanche photodiode and high-impedance front-end preamplifier. Sensitivities approaching -40 dB (1 mW) for 16.5 dB CNR in 36 MHz subscriber bandwidth are predicted for a 60-channel system. Preliminary experimental tests on an optical-feedback subcarrier receiver showed -34 dB (1 mW) sensitivity at 1.55 mu m from 16.5 dB CNR in a 36 MHz bandwidth centered on 1.2 GHz with a 12% modulation index single-channel FM test signal.<<ETX>>

  • Optics for EUV lithography

    Extreme Ultraviolet Lithography (EUVL), using 13 nm radiation, has a high probability to become the Next Generation Lithography of choice for resolutions of 50 nm and below. The work at CARL ZEISS focusses on the development of optical system design and core technologies necessary for the industrialization of EUVL optical systems.

  • Bend insensitive fiber design strategies

    Robust bending sensitivity of optical fiber can enable its low cost deployment deep into the telecom network. We will discuss the bending loss of single mode optical fibers and design techniques to improve bending sensitivity.

  • A double-SLM technique for designing arbitrary optical trapping patterns

    There exist efficient algorithms (such as for instance the Gerchberg-Saxton algorithm) to calculate a phase hologram that will construct a desired intensity distribution in a given plane when displayed as a gray- value pattern on a spatial light modulator (SLM). The process, however, typically scrambles the phase.

  • Flip-chip packaging using micromachined conductive polymer bumps and alignment pedestals for MOEMS

    Using flip-chip bonding techniques with micromachined conductive polymer bumps and passive alignment techniques with electroplated side alignment pedestal bumps, a prototype microoptoelectromechanical systems (MOEMS) structure for optical input/output (I/O) couplers has been designed, fabricated and characterized. A top MOEMS substrate has through holes, contact metal pads, and side alignment pedestals with electroplated NiFe to align GaAs metal- semiconductor-metals (MSMs). Conductive polymer bumps have been formed on contact metal pads of GaAs MSMs using thick photoresist bump-holes as molding patterns. A diced GaAs photodetectors die with micromachined conductive polymer bumps was aligned to the side alignment pedestals and flip-chip bonded onto the substrate. This conductive polymer flip-chip bonding technique allowed a very low contact resistance (/spl sim/10 m/spl Omega/), a lower bonding temperature (/spl sim/170/spl deg/C), and simple processing steps. The GaAs MSM photodetectors flip-chip mounted on the top of OE-MCM substrate showed a low dark current of about 10 nA and a high responsivity of 0.33 A/W.

  • A pulsed microwave oscillator using optically controlled active feedback

    An optically controlled microwave oscillator is demonstrated using MMIC compatible design techniques. The oscillator uses an optically controlled active inductor as a tunable feedback element in a two-port common gate FET circuit configuration. Experimental results are presented for a pulsed mode of operation that is triggered by illuminating the active feedback circuit.<<ETX>>

  • A novel in-service surveillance scheme for optically amplified transmission systems

    We propose here a novel surveillance scheme for an optically amplified transmission system which allows simultaneous in-service fault identification for fiber and optical amplifiers. While requiring additional fiber Bragg gratings of designated wavelengths to be integrated with optical amplifiers, the monitoring light source is derived from the unused spectra of ASE and no dedicated light source is needed as in conventional OTDR technique. We have further demonstrated the scheme's feasibility with a 100-km, three-EDFA optical transmission system.

  • Design, process and performance diagnosis of InP-based photonic components using low-coherence reflectometry

    Describes the high potential of optical low-coherence reflectometry (OLCR) and its upgraded in-situ facilities to assess the fabrication techniques of InP- based photonic circuits and also to help to optimize the design and further evaluate the performance of several key components (butt-joints, bend guides, MMI couplers, EAMs, DBR lasers, etc.,).

  • Hierarchical optical path network design algorithm considering waveband add/drop ratio constraint

    We investigate the relation between waveband add/drop ratio and switch size for hierarchical optical path cross-connects. We then propose a design algorithm for hierarchical optical path networks that considers restrictions on the waveband add/drop ratio. Its performance is evaluated by numerical experiments.



Standards related to Optical design

Back to Top

(Replaced) IEEE Standard VHDL Language Reference Manual

his standard revises and enhances the VHDL language reference manual (LRM) by including a standard C language interface specification; specifications from previously separate, but related, standards IEEE Std 1164 -1993,1 IEEE Std 1076.2 -1996, and IEEE Std 1076.3-1997; and general language enhancements in the areas of design and verification of electronic systems.