188 resources related to Oil drilling
- Topics related to Oil drilling
- IEEE Organizations related to Oil drilling
- Conferences related to Oil drilling
- Periodicals related to Oil drilling
- Most published Xplore authors for Oil drilling
The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.
To promote awareness, understanding, advancement and application of ocean engineering and marine technology. This includes all aspects of science, engineering, and technology that address research, development, and operations pertaining to all bodies of water. This includes the creation of new capabilities and technologies from concept design through prototypes, testing, and operational systems to sense, explore, understand, develop, use, and responsibly manage natural resources.
Science, technology and applications spanning the millimeter-waves, terahertz and infrared spectral regions
2019 IEEE 58th Conference on Decision and Control (CDC)
The CDC is recognized as the premier scientific and engineering conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, systems and control, and related areas.The 58th CDC will feature contributed and invited papers, as well as workshops and may include tutorial sessions.The IEEE CDC is hosted by the IEEE Control Systems Society (CSS) in cooperation with the Society for Industrial and Applied Mathematics (SIAM), the Institute for Operations Research and the Management Sciences (INFORMS), the Japanese Society for Instrument and Control Engineers (SICE), and the European Union Control Association (EUCA).
2019 IEEE International Conference on Industrial Technology (ICIT)
The scope of the conference will cover, but will not be limited to, the following topics: Robotics; Mechatronics; Industrial Automation; Autonomous Systems; Sensing and artificial perception, Actuators and Micro-nanotechnology; Signal/Image Processing and Computational Intelligence; Control Systems; Electronic System on Chip and Embedded Control; Electric Transportation; Power Electronics; Electric Machines and Drives; Renewable Energy and Smart Grid; Data and Software Engineering, Communication; Networking and Industrial Informatics.
The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.
Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.
Component parts, hybrid microelectronics, materials, packaging techniques, and manufacturing technology.
Serves as a compendium for papers on the technological advances in control engineering and as an archival publication which will bridge the gap between theory and practice. Papers will highlight the latest knowledge, exploratory developments, and practical applications in all aspects of the technology needed to implement control systems from analysis and design through simulation and hardware.
Theory, concepts, and techniques of science and engineering as applied to sensing the earth, oceans, atmosphere, and space; and the processing, interpretation, and dissemination of this information.
OCEANS '86, 1986
It is now clear that we must consider that there is a meaningful variation in the marine environment and in the available marine resources as between our country's several natural ocean regions. The environments of these ocean regions impact on, and man's use of their resources are managed from, the bordering coastal area. As between the several ocean regions the ...
OCEANS 1984, 1984
Characteristics of the Small Waterplane Area Twin Hull (SWATH) ship configuration are examined in respect to requirements for oceanographic research, hydrographic surveys, and seismic exploration. SWATH ship motion characteristics are such that a displacement of as little as 1,500 tons can be adequate to permit unrestricted ocean operations with added comfort to personnel, increased safety, and better equipment handling features ...
OCEANS 96 MTS/IEEE Conference Proceedings. The Coastal Ocean - Prospects for the 21st Century, 1996
The Beaufort Sea area has vast reserves of oil in the geological formations under its frigid shallow waters. These reserves may need to be tapped some day soon specifically if there are problems of getting oil from the Middle East and other present sources. It is not known for sure how vast the reserve is and how soon it will ...
Electrical Engineering, 1933
Variable-voltage d-c drives have been applied successfully to both the cable tool and rotary methods of oil well drilling. This article gives a comparison of characteristics of 4 different combinations of electrical equipment for this service. Although the method of comparison used is applied only to internal combustion engine d-c electric drives, it may be used advantageously for comparing other ...
2009 Fourth International Conference on Computer Sciences and Convergence Information Technology, 2009
Drilling fluids play a key role in the minimization of well bore problems when drilling oil or gas wells, usually the design of drilling fluids is depended on many experiments with experience. Rule-based and case-based reasoning drilling fluid system was designed with theory of expert system by some researchers. But it is very difficult to get to know and express ...
Dream Jobs 2011: Meet Hsin-Chien Huang, Pixel Provocateur
Bari-Bari-II: Jack-Up Rescue Robot with Debris Opening Function
Charging Ahead: the Case for Plug-in Hybrid Cars
Fog Computing in Energy and Environment Panel - Fog World Congress 2017
Standardizing Sensor Analytics for the Internet of Things: IEEE Standards Association Webinar
Larson Collection interview with Chauncey Starr
Technology Discourse: Bio Fuels
It is now clear that we must consider that there is a meaningful variation in the marine environment and in the available marine resources as between our country's several natural ocean regions. The environments of these ocean regions impact on, and man's use of their resources are managed from, the bordering coastal area. As between the several ocean regions the coastal zones also differ, in terms of their social, economic, and political character. It seems that oversight of the management of the coastal zone and the EEZ is best organized on a regional basis with joint Federal and State consultation and coordination of plans and activities.
Characteristics of the Small Waterplane Area Twin Hull (SWATH) ship configuration are examined in respect to requirements for oceanographic research, hydrographic surveys, and seismic exploration. SWATH ship motion characteristics are such that a displacement of as little as 1,500 tons can be adequate to permit unrestricted ocean operations with added comfort to personnel, increased safety, and better equipment handling features than can be provided by comparable monohulls. The dominant advantage of the SWATH ship over monohulls is greatly reduced motions and proper design will make these motions nearly independent of wave direction relative to ship heading. A comparison of principal particulars shows that the cost of SWATH ships can be competitive with monohulls for research, survey, and seismic applications.
The Beaufort Sea area has vast reserves of oil in the geological formations under its frigid shallow waters. These reserves may need to be tapped some day soon specifically if there are problems of getting oil from the Middle East and other present sources. It is not known for sure how vast the reserve is and how soon it will be needed. For the last 20 years, there has been much effort to find this out. It is the subject of this paper to find out exactly where the oil is, how much there is and how to get it into the Alaskan pipe line practically and economically.
Variable-voltage d-c drives have been applied successfully to both the cable tool and rotary methods of oil well drilling. This article gives a comparison of characteristics of 4 different combinations of electrical equipment for this service. Although the method of comparison used is applied only to internal combustion engine d-c electric drives, it may be used advantageously for comparing other types of prime movers.
Drilling fluids play a key role in the minimization of well bore problems when drilling oil or gas wells, usually the design of drilling fluids is depended on many experiments with experience. Rule-based and case-based reasoning drilling fluid system was designed with theory of expert system by some researchers. But it is very difficult to get to know and express precious relationship between drilling fluid formulation and its performance. Performance of drilling fluids can be measured with test device when drilling fluid is ready. A performance oriented drilling fluids design system is presented, with supervised artificial neural network algorithm to acquire knowledge by learning from experimental data. The system can be used to design drilling fluid according to specified performance. Experimental results show that drilling fluids designed by the system can satisfy specified performance.
The Minerals Management Service (MMS) requires that deep water oil drilling and production platforms in the northern Gulf of Mexico collect and provide current profile data to the National Data Buoy Center (NDBC). NDBC processes and displays the resulting currents on the NDBC website. NDBC has recently implemented quality control algorithms agreed upon by industry and the government. The resulting imagery and data, including quality control flags, are available on the publicly available NDBC website. The quality control algorithms and flags are presented and comparisons of the resulting files are described. Oil companies must collect current profile data when drilling wells or operating production platforms in water greater than 400 meters deep. They are required to collect the data at 20 minute intervals and transmit the data via FTP to NDBC. The data are received, decoded, and quality controlled at NDBC. The current profiles are then formatted in TEmperature Salinity and Current (TESAC) messages and transmitted over the Global Telecommunications System (GTS). The data are also viewed over the NDBC website as columnar listings and current vector stick plots. In order to determine the quality control algorithms for the current profiles, a committee of oil company, industry, and government representatives determined an approach that includes both individual bin (depth level) and profile algorithms. The algorithms take advantage of the fact that the Teledyne RDI Acoustic Doppler Current Profiler (ADCP) collects error velocity, percent good statistics for 3 and 4 beams, and correlation matrices and echo amplitudes for each beam. The algorithms described in this presentation were then implemented and flags generated for each quality control test. A total of nine flags are assigned within the NDBC database. The flags indicate good data (3), suspect data (2), or bad (1) data. Only bad data are not reproduced or plotted on the NDBC real-time webpage. Results from the implementation are being reviewed, but a quick look indicates that the algorithms are returning accurate descriptions of the ADCP data. The stick plots of ocean current with depth are much "cleaner" following the quality control implementation. The implementation of the quality control algorithms was delayed by Hurricanes Katrina and Rita, which impacted both the NDBC and the oil industry in the Gulf of Mexico. NDBC is now resubmitting past data files through the quality control algorithms to insure that all data at NDCB have been quality controlled. The results of this effort (including the quality control algorithms) are being shared with Integrated Ocean Observing System (IOOS) partners in an effort to standardize quality control of oceanographic data
New Intelligent Layered regulating and testing system uses micro-motor source to regulating the size of opened Nozzle in the underground. it can be directly observed the downhole flow changes and judged the regulation purpose of real- time layer on the ground. The essential feature of the new system is that it can accomplish the testing and allocating operation simultaneously. This system doesn't influence other layers when working with specific layer which makes regulating procedure accurate and prompt. Therefore, this system resolves many problems in conventional operation such as the frequent running and pulling, low efficiency, long operation procedure and high operation strength.
Due to the damage and sanding of the formation, the oil productivity is severely affected. The applicability of the conventional flowing technology with gassy water is very limited. The effect of broken-down is not very satisfying. In order to solve this problem above mentioned, this paper proposed the Acoustic Assistant drainage and Broken-down Technology. This technology combines the Acoustic Assistant drainage with the flowing technology with gassy water together. Through the common function of acoustic vibration and flowing with gassy water, the sweeping areas are enlarged, at the same time, the back-drainage of the formation is strengthened, which makes the ultimate effect of broken-down is improved. This technology has been widely applied in the GUDAO oilfield, SHENGLI, the effect is obviously better than that of the conventional flowing technology with gassy water. It has a good effect on new wells, the wells with long time shut-in and the wells with low productivity.
In this article, we present our research work in intrusion detection over wireless ad hoc network. We summarize the current intrusion detection techniques into three categories. Then we investigate detection of wormhole attack in wireless ad hoc networks. A novel end-to-end wormhole detection method is proposed
The oil and gas industry is heavily dependent on instrumentation and measurement technology. This article explores the relationship between the petroleum industry and the I&M technology that supports it. It specifically identifies technology needed by, but not yet available to, the industry. Research groups are invited to consider how their efforts might be applied to the industry's exciting and remarkably demanding measurement problems.
No standards are currently tagged "Oil drilling"