New Technology Connections Portal
74 resources related to New Technology Connections Portal
- Topics related to New Technology Connections Portal
- IEEE Organizations related to New Technology Connections Portal
- Conferences related to New Technology Connections Portal
- Periodicals related to New Technology Connections Portal
- Most published Xplore authors for New Technology Connections Portal
The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.
With technically co-sponsored by IEEE ComSoc(Communications Society), IEEE ComSocCISTC(Communications & Information Security Technical Community), and IEEE ComSocONTC(Optical Networking Technical Community), the ICACT(International Conference onAdvanced Communications Technology) Conference has been providing an open forum forscholars, researchers, and engineers to the extensive exchange of information on newlyemerging technologies, standards, services, and applications in the area of the advancedcommunications technology. The conference official language is English. All the presentedpapers have been published in the Conference Proceedings, and posted on the ICACT Websiteand IEEE Xplore Digital Library since 2004. The honorable ICACT Out-Standing Paper Awardlist has been posted on the IEEE Xplore Digital Library also, and all the Out-Standing papersare subjected to the invited paper of the "ICACT Transactions on the Advanced Communications Technology" Journal issue by GIRI
2019 IEEE Intelligent Vehicles Symposium (IV)
The Intelligent Vehicles Symposium (IV’19) is a premier forum sponsored by the IEEE Intelligent Transportation Systems Society (ITSS). Researchers, engineers, practitioners, and students, from industry, universities and government agencies are invited to present their latest work and to discuss research and applications for Intelligent Vehicles and Vehicle-Infrastructure Cooperation. Technical sessions, workshops, poster sessions, exhibition, and technical visits will be organized.
Circuits and Systems, Computers, Information Technology, Communication Systems, Control and Instrumentation, Electrical Power Systems, Power Electronics, Signal Processing
BHI is "informatics for smart, precision and preventive medicine."
IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...
Publishes original and significant contributions relating to the theory, design, performance and reliability of electron devices, including optoelectronics devices, nanoscale devices, solid-state devices, integrated electronic devices, energy sources, power devices, displays, sensors, electro-mechanical devices, quantum devices and electron tubes.
Reprints articles from other publications of significant interest to members. The papers are aimed at those engaged in managing research, development, or engineering activities. Reprints make it possible for the readers to receive the best of today's literature without having to subscribe to and read other periodicals.
This IEEE Computer Society periodical covers the many rapidly emerging issues facing information technology professionals, developers, and managers of enterprise information systems. IT Professional's coverage areas include: Web services, Internet security, data management; enterprise architectures and infrastructures; organizing and utilizing data; instituting cross-functional systems; using IT for competitive breakthroughs; integrating systems and capitalizing on IT advances; emerging technologies like electronic ...
All telecommunications, including telephone, telegraphy, facsimile, and point-to-point television, by electromagnetic propagation, including radio; wire; aerial, underground, coaxial, and submarine cables; waveguides, communication satellites, and lasers; in marine, aeronautical, space, and fixed station services; repeaters, radio relaying, signal storage, and regeneration; telecommunication error detection and correction; multiplexing and carrier techniques; communication switching systems; data communications; communication theory; and wireless communications.
2016 IEEE First International Conference on Connected Health: Applications, Systems and Engineering Technologies (CHASE), 2016
Technological advances lead to the development of an increasing number of computer-based devices and software applications, used in the healthcare sector. Recently, rehabilitation programs involving special need children in Sweden have been the focused for these applications. The aim of this project is to create an evidence-based online platform that can be used on a computer or media pads directly ...
IBM Journal of Research and Development, 2009
Self-service technologies are relied upon by service delivery organizations that make use of their low cost and ubiquity to deliver componentized self- service to worldwide clients. A rolebased portal can be a key technology component for any servicedelivery organization seeking to provide an advanced self-service capability. Portals that have access to information on the client's organization, its contracted services, and ...
2008 IEEE Intelligent Vehicles Symposium, 2008
We have analyzed a hypothetical scenario for hierarchical wireless vehicle networks consisting of a central portal and a large number of vehicles. Vehicles join the network, establish connections to the portal, transfer data, and then leave the network. An efficient approach to provide authentication between a vehicle and the portal is to use the same pre-established symmetric link key for ...
2016 3rd National Foundation for Science and Technology Development Conference on Information and Computer Science (NICS), 2016
In recent years, the growing demand of personal healthcare has attracted much attention from both researchers and practitioners. The motivation of designing an efficient intelligent system that keeps track physical conditions, makes diagnosis based on the symptoms, and recommends appropriate treatments is the long-term objective in Health Informatics. In this talk, we will present our recent results of creating such ...
2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), 2018
The Smart Factory Web (SFW) is a platform that connects Smart Factories over a network to enable flexible sharing and management of resources, assets and inventory to maximize production and efficiency. In order to become part of the Smart Factory Web, network participants describe not only their products, but also the factory capabilities to order to improve factory-to-factory collaboration. A ...
Smart Grid Success Story - Wanda Reder - Ignite: Sections Congress 2017
IEEE N3XT @ SXSW 2016: Brian Garsson, Cielo Private Equities
WIE ILC 2014: Sondra Barbour, Authentic Connections: A Personal Approach to Leadership
Mark Guzdial: 2012 IEEE Computer Society Undergraduate Teaching Award Winner
IEEE N3XT @ SXSW 2016: Devon Ryan, Lion Mobile
Why is COLLABORATION better with IEEE Collabratec?
FCC Activities to Support 5G - Julius Knapp - 5G Technologies for Tactical and First Responder Networks 2018
Industry Connections: Oleg Logvinov - Why I Joined
Resonant Power Supply: NXP
IEEE N3XT @ SXSW 2016: Erik Norwood, Curb
Art, Technology, and Whimsy
Micrel Ripple Blocker
IRDS: A New Way to Roadmap the Electronics Industry - IEEE Rebooting Computing Industry Summit 2017
Panel 5: Challenges for millimeter wave MIMO in CMOS technology - Brooklyn 5G - 2015
Engineers & the Industry: New Opportunities
IMS 2011 Microapps - Transient FEM Solver and Hybrid FE-IE Method; New Technologies in HFSS 13.0
Q&A with Chris Franzino: IEEE Big Data Podcast, Episode 5
NR - Design For Future - Mikael Hook: Brooklyn 5G Summit 2017
MyComputer: You Choose, We Deliver
Technological advances lead to the development of an increasing number of computer-based devices and software applications, used in the healthcare sector. Recently, rehabilitation programs involving special need children in Sweden have been the focused for these applications. The aim of this project is to create an evidence-based online platform that can be used on a computer or media pads directly together with the child. The platform should help different caretakers to structure their work, henceforward and enhance action plans for individuals with special needs. A secondary aim is to identify gaps in the existing approach to stimulate future research efforts to develop new Information and Communication Technologies (ICT) in this context. By utilizing ICT tools to create a more integrated communication platform between different regions in the healthcare sector and rehabilitation programs, we hope to verify, via this study, the growths and understanding of how improved communication affects can change the process in regards to creating action plans and support organizations in creating efficient connections.
Self-service technologies are relied upon by service delivery organizations that make use of their low cost and ubiquity to deliver componentized self- service to worldwide clients. A rolebased portal can be a key technology component for any servicedelivery organization seeking to provide an advanced self-service capability. Portals that have access to information on the client's organization, its contracted services, and the service components provided can be used to manage the parameters of service delivery. Providing the client's management dashboard through self-service portals establishes a foundation that allows a service organization to present its services value chain in terms and subprocesses that are relevant to its clients. Exposing services processes to clients requires a governance layer that ensures consumers of multiple services can manage their service delivery in ways that make the client more efficient. Supporting technologies such as “single sign on,” reporting, model-driven tooling, and real-time linkages to services entitlement complete the core technology set that fulfills the end-to-end self-service architecture. In this paper, we provide an overview of the unique self-service requirements for service delivery, followed by an overview of the technologies required to meet those requirements. We also review innovations that enable the creation of the IBM Services Connection, a worldwide deployed service support portal.
We have analyzed a hypothetical scenario for hierarchical wireless vehicle networks consisting of a central portal and a large number of vehicles. Vehicles join the network, establish connections to the portal, transfer data, and then leave the network. An efficient approach to provide authentication between a vehicle and the portal is to use the same pre-established symmetric link key for multiple occasions instead of performing a rigorous key agreement for every new occasion. However, since the same key is used for extended periods of time, the risk of cryptanalysis and offline bruteforcing of the link key increases. Therefore, there is a need to establish new keys between the portal and the vehicles (rekeying) in a secure and efficient manner. Moreover, to provide authenticity of the portal, the portal has a public and private key pair, and the public key is preinstalled in the vehicles. To reduce the risk of cryptanalysis of the private key of the portal, the public and private key pair of the portal must also be rekeyed. In this paper, we propose low-cost key management protocols for rekeying of the link keys and the public/private key pair of the portal.
In recent years, the growing demand of personal healthcare has attracted much attention from both researchers and practitioners. The motivation of designing an efficient intelligent system that keeps track physical conditions, makes diagnosis based on the symptoms, and recommends appropriate treatments is the long-term objective in Health Informatics. In this talk, we will present our recent results of creating such the system using knowledge model and the Internet-of-Thing (IoT) technology. The system firstly requests the IoT device to send the physical conditions of a patient using specialized sensors namely LM35 (temperature measurement), Pluse Sensor (heartbeat) and ESP8266 (network connection). The collected personal symptoms are then integrated to a server for diagnosis of possible diseases such as viral fever, hypothermia, tachycardia and heart failure. This is done by a new technique called the intuitionistic fuzzy recommender system (IFRS), which in essence is a recommender system deployed in the intuitionistic fuzzy set for diagnosing of diseases under uncertain environments. We will present the theoretical basis of IFRS including: i) the formulation of single-criterion and multi-criteria IFRS accompanied with some essential properties; ii) a hybrid model between picture fuzzy clustering and IFRS called HIFCF; iii) intuitionistic fuzzy vector (IFV) with intuitionistic vector similarity measure (IVSM); and iv) linguistic similarity measure. Using the model, diseases are ranked according to the current symptoms and stored in the server. Information of diseases and appropriate treatment therapies is sent back to the patient as well as stored in a web portal for personal monitoring.
The Smart Factory Web (SFW) is a platform that connects Smart Factories over a network to enable flexible sharing and management of resources, assets and inventory to maximize production and efficiency. In order to become part of the Smart Factory Web, network participants describe not only their products, but also the factory capabilities to order to improve factory-to-factory collaboration. A Smart Factory Web Portal (SFWP) enables secure data and service integration in cross-site application scenarios as well as `plug & work' functions for devices, machines, and data analytics software by applying industrial standards, Open Platform Communications Unified Architecture (OPC UA), and Automation Markup Language (AutomationML or AML for short). OPC UA serves as a comprehensive and secure communication protocol from the machine level into the cloud. A Cloud Coupler on the shop floor publishes the availability of a factory and selected process data in the SFWP. Customers or even smart machines can use this information to make decisions for placing an order and track their orders in real time. In order to simplify the setup of the connection to the cloud and minimize the commissioning time the cloud coupler also aggregates all OPC UA servers on devices in the factory into a single OPC UA aggregated server address space. In this paper an architecture is proposed which uses cloud coupler and plug and work techniques to make a new or retrofit factory available in a SFW to share capability information towards a new marketplace for manufacturing. It is shown that the integration efforts are decreased but also the use of standards reduces the effort to define interfaces.
Genetic mutations are the underlying cause of common human traits like hair color, rare conditions like Mendelian diseases, or response to drugs. Understanding the set of mutations in the genetic sequence, the variome, is extremely valuable to achieve the ultimate goals of personal genomics and personalized medicine. This critical life sciences research field has grown greatly in recent years, mostly due to the appearance of projects such as the Human Variome Project or the European GEN2PHEN Project. Nonetheless, variome data integration systems and included variants are far from being standardized and widely used in the research community workflow. The majority of human variome resources remain disconnected and a single view over all these data is clearly missing. In this paper, an extensible engine for genetic variation data integration is presented. Extensions can be easily added to the platform as new features, related data types or connections to distributed resources. A gene-centric web portal, deployed upon the proposed platform, which offers transparent access to multiple locus-specific databases, to known variants and to complementary gene-related information, is also detailed.
The technologies in the automotive industry are becoming smarter and more advanced than before. Complexity of vehicle electronics is becoming a greater issue and often caused by more interfaces, more connections, more displays, more user demand features and more suppliers. This means there is a great need to supply system updates to ensure higher quality and improve functionality. This paper introduces a new solution for vehicle updates that will help OEMs to reduce cost, reduce recalls, increase quality, ease vehicle updates and take better control of vehicles fleet in the market. This new solution consists of updating vehicle ECUs over the air without the need of a physical connection to the vehicle. We are presenting Fotamotive architecture, process flow chart, system components, vehicle cloud management, simulation and results.
Performance Requirements and Verification of the IEEE 802 Wireless Technologies
The IEEE 802.11 market has seen spectacular growth over the past few years, and this growth is continuing at unprecedented rates. IEEE 802.11 technology has had a profound impact on the way consumers work, and on their leisure activities. Growing from cottage industry to a mainstream market across multiple segments, IEEE 802.11 products have become increasingly sophisticated, moving beyond traditional internet connectivity to include phones, cameras, gaming systems and even televisions. As IEEE 802.11 technology has advanced and the industry has matured, the testing methodologies continue to advance as well. Early testing methodologies primarily focused on whether or not two products could exchange data and seamlessly inter-operate. In response to both the wireless industry's need to perform advanced product testing and consumer demand for high quality IEEE 802.11 devices, a new testing specification, IEEE 802.11.2, is being developed by the IEEE 802.11 Task Group T. IEEE 802.11.2 incorporates test methods and metrics for roaming, voice and video quality, power consumption, throughput performance and other important parameters. These advances in test methodology are required to improve the quality of IEEE 802.11 solutions and enable reduction in design cycles. Voice applications, for example, have pushed the IEEE 802.11 industry to specify several new protocols including IEEE 802.11r fast roaming, IEEE 802.11e quality of Service (QoS) and power-save. New applications that carry both voice and video over IEEE 802.11 have stringent performance requirements that can only be guaranteed by thorough and methodical testing. This tutorial will provide an in-depth look at the performance requirements of the demanding voice and video applications. We will examine how these applications perform today and will look at the improvements offered by the emerging IEEE 802.11n standard. We will discuss performance, security and power conservation issues in the context of mesh netwo k architecture being introduced by the emerging IEEE 802.11s specification. Finally, we will examine the test methods and metrics currently in the IEEE 802.11.2 recommended practices document and will discuss performance verification methodology appropriate for a variety of networks and applications.
Recent explosion of new network-based services such as mobile apps, cloud services, and N-screen services requires more wired and wireless traffic to provide the services stably. It is inevitable to construct Giga-Internet network and to provide fast Internet connection. Giga-Internet means a next generation Internet of 1Gbps, whose speed is 10 times faster than the current BcN network. The Korea government has built the policies of enhancing network infrastructure, including broadband network plans and BcN plans. To compete with other countries which are already preparing for introducing Giga-Internet services, Korea will establish Giga-Internet and start commercial services in 2012. In this paper, we analyze the necessity of stimulating Giga-Internet and propose the future plan of Giga-Internet.
SMAC-Social Networking, Mobile Network, Analytics and Cloud Computing, is the latest buzz word in many established and upcoming organizations. Social Networking refers to an individual centered online portal to share personal profiles, preferences and make new friends or connections. The era of smartphones began a decade back but now it is at its peak with mobility and mobile networks a major part of every individual's life, thanks to the advancements in wireless technologies, mobile computing and usability engineering. Big Data and Analytics is a domain prevalent due to the large quantity of unstructured data generated on a day to day basis from which patterns are recognized, trends are known, forecasting is possible, user behavior is predicted and much more. Cloud Computing techniques elaborate the ways in which data can be stored and retrieved from a centralized location especially when the location is provided as a service to the user. Though the concepts, working procedure, target audience and need of each of the domains in SMAC is different, the challenge remains constant-Privacy preservation. This paper identifies the major challenges of privacy preservation and summarizes the techniques used, with pros and cons, in each domain.
This standard specifies unique per-device identifiers (DevID) and the management and cryptographic binding of a device to its identifiers, the relationship between an initially installed identity and subsequent locally significant identities, and interfaces and methods for use of DevIDs with existing and new provisioning and authentication protocols.