Conferences related to Multicast protocols

Back to Top

2020 IEEE 17th Annual Consumer Communications & Networking Conference (CCNC)

IEEE CCNC 2020 will present the latest developments and technical solutions in the areas of home networking, consumer networking, enabling technologies (such as middleware) and novel applications and services. The conference will include a peer-reviewed program of technical sessions, special sessions, business application sessions, tutorials, and demonstration sessions.


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


2020 IEEE Radio and Wireless Symposium (RWS)

RWW2020 will be an international conference covering all aspects of radio and wireless. RWW2020's multidisciplinary events will bring together innovations that are happening across the broad wireless spectrum. RWS2020, this conference application, acts as the main conference for the entire RWW of events that includes the following conferences: PAWR2020, SiRF2020, WiSNet2020, and TWiOS2020 (IEEE Topical Conference on RF/microwave Power Amplifiers, IEEE Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems, IEEE Topical Conference on Wireless Sensors and Sensor Networks, and IEEE Topical Workshop on the Internet of Space IoS, respectively). In addition to traditional podium presentations and poster sessions, tracks for IEEE Distinguished Lectures, Sunday half-day workshops, Monday panels, and a demo session are planned. A RWW2020 plenary talk are a parallel IoT Summit are planned. A student competition is also planned.

  • 2019 IEEE Radio and Wireless Symposium (RWS)

    This is a conference with a focus on wireless components, applications, and systems that impact both our current and future life style. The conference's main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today's design compromises can trigger tomorrow's advanced technologies. Where dreams can become a reality. RWS is the cornerstone conference for Radio Wireless Week.

  • 2018 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today’s design compromises can trigger tomorrow’s advanced technologies. Where dreams can become a reality.

  • 2017 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today’s design compromises can trigger tomorrow’s advanced technologies. Where dreams can become a reality.

  • 2016 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be bench-marked against the needs of circuit designers at the bleeding edge of RF systems, where today

  • 2015 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today

  • 2014 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss hardware design and system performance of the state -of-the-art wireless systems. Includes an expanded program on the latest information on wireless communications and networking, and associated enabling technologies as new services and applications emerge.

  • 2013 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss hardware design and system performance of the state-of-the-art wireless systems. Includes an expanded program on the latest information on wireless communications and networking, and associated enabling technologies as new services and applications emerge.

  • 2012 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss hardware design and system performance of the state-of-the-art wireless systems. Includes an expanded program on the latest information on wireless communications and networking, and associated enabling technologies as new services and applications emerge.

  • 2011 IEEE Radio and Wireless Symposium (RWS)

    All aspects of components and systems related to radio and wireless networks.

  • 2010 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss various aspects of wireless communication systems and the state-of-the-art in both fields by exploring the connections between hardware design and system performance.

  • 2009 IEEE Radio and Wireless Symposium (RWS)

    This symposium highlights the state of the art of hardware and systems of radio and wireless

  • 2008 IEEE Radio and Wireless Symposium (RWS)

  • 2007 IEEE Radio and Wireless Symposium (RWS)

  • 2006 IEEE Radio and Wireless Symposium (RWS)

  • 2004 IEEE Radio and Wireless Conference - (RAWCON 2004)

  • 2003 IEEE Radio and Wireless Conference - (RAWCON 2003)

  • 2002 IEEE Radio and Wireless Conference - (RAWCON 2002)

  • 2001 IEEE Radio and Wireless Conference - (RAWCON 2001)

  • 2000 IEEE Radio and Wireless Conference - (RAWCON 2000)

  • 1999 IEEE Radio and Wireless Conference - (RAWCON '99)

  • 1998 IEEE Radio and Wireless Conference - (RAWCON '98)


GLOBECOM 2020 - 2020 IEEE Global Communications Conference

IEEE Global Communications Conference (GLOBECOM) is one of the IEEE Communications Society’s two flagship conferences dedicated to driving innovation in nearly every aspect of communications. Each year, more than 2,900 scientific researchers and their management submit proposals for program sessions to be held at the annual conference. After extensive peer review, the best of the proposals are selected for the conference program, which includes technical papers, tutorials, workshops and industry sessions designed specifically to advance technologies, systems and infrastructure that are continuing to reshape the world and provide all users with access to an unprecedented spectrum of high-speed, seamless and cost-effective global telecommunications services.


ICC 2020 - 2020 IEEE International Conference on Communications

All topics relating to existing and emerging communications networking technologies.


More Conferences

Periodicals related to Multicast protocols

Back to Top

Broadcasting, IEEE Transactions on

Broadcast technology, including devices, equipment, techniques, and systems related to broadcast technology, including the production, distribution, transmission, and propagation aspects.


Circuits and Systems for Video Technology, IEEE Transactions on

Video A/D and D/A, display technology, image analysis and processing, video signal characterization and representation, video compression techniques and signal processing, multidimensional filters and transforms, analog video signal processing, neural networks for video applications, nonlinear video signal processing, video storage and retrieval, computer vision, packet video, high-speed real-time circuits, VLSI architecture and implementation for video technology, multiprocessor systems--hardware and software-- ...


Communications Letters, IEEE

Covers topics in the scope of IEEE Transactions on Communications but in the form of very brief publication (maximum of 6column lengths, including all diagrams and tables.)


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


Communications Surveys & Tutorials, IEEE

Each tutorial reviews currents communications topics in network management and computer and wireless communications. Available tutorials, which are 2.5 to 5 hours in length contains the original visuals and voice-over by the presenter. IEEE Communications Surveys & Tutorials features two distinct types of articles: original articles and reprints. The original articles are exclusively written for IEEE Communications Surveys & Tutorials ...


More Periodicals

Most published Xplore authors for Multicast protocols

Back to Top

Xplore Articles related to Multicast protocols

Back to Top

Indexing repositories

2009 15th International Workshop on Thermal Investigations of ICs and Systems, 2009

None


Wireless multicast system with connection and connectionless modes

IEEE 54th Vehicular Technology Conference. VTC Fall 2001. Proceedings (Cat. No.01CH37211), 2001

This paper proposes a novel method of wireless multicast communication with a mixed mode of connection and connectionless orientation. Taking advantage of the broadcast characteristics of wireless media and overcoming the independent errors in the transmission, we establish a new algorithm to minimize the transmission time. The state transitions of the transmission in the connection and connectionless modes are described. ...


Multicast communication in "ad hoc" networks

VTC '98. 48th IEEE Vehicular Technology Conference. Pathway to Global Wireless Revolution (Cat. No.98CH36151), 1998

This paper presents a simulation comparison of two unicast "ad-hoc" network routing protocols and proposes a multicast protocol extension, which is based on dynamic source routing (DSR). Our new multicast approach works sender oriented and spans a delivery tree by reusing inherent route information from DSR. Simulation results show that this protocol is efficient and outclasses in various performance measurements ...


A NETwork COding based Multicasting (NETCOM) over IEEE 802.11 Multi-hop

2007 IEEE 65th Vehicular Technology Conference - VTC2007-Spring, 2007

In this paper, we present an analysis of various multicast schemes over IEEE 802.11 multi-hop. Analyzing performance of wireless multicasting communication is important because multicast communication is gaining more and more attention in wireless networks with numerous potential applications. The network coding has recently drawn people's attention and has proven to have benefits when it is applied to multicasting. Multi-hop ...


Fast overlay tree based on efficient end-to-end measurements

IEEE International Conference on Communications, 2005. ICC 2005. 2005, 2005

Most of the application-layer multicast protocols use end-to-end delay as their primary metric. However, for applications such as stored video delivery, meeting a certain target bandwidth requirement is of primary importance. In this paper, we present a centralized approach on how to build a fast overlay tree based on efficient end-to-end measurements. We first investigate how to infer underlay topology ...


More Xplore Articles

Educational Resources on Multicast protocols

Back to Top

IEEE-USA E-Books

  • Indexing repositories

    None

  • Wireless multicast system with connection and connectionless modes

    This paper proposes a novel method of wireless multicast communication with a mixed mode of connection and connectionless orientation. Taking advantage of the broadcast characteristics of wireless media and overcoming the independent errors in the transmission, we establish a new algorithm to minimize the transmission time. The state transitions of the transmission in the connection and connectionless modes are described. With random and burst BER for each terminals assumed, the performances are analyzed with computer simulation. It is shown that the total transmission time was much reduced compared with that of the conventional system.

  • Multicast communication in "ad hoc" networks

    This paper presents a simulation comparison of two unicast "ad-hoc" network routing protocols and proposes a multicast protocol extension, which is based on dynamic source routing (DSR). Our new multicast approach works sender oriented and spans a delivery tree by reusing inherent route information from DSR. Simulation results show that this protocol is efficient and outclasses in various performance measurements the well-known unicast solutions "TORA" and "DSR".

  • A NETwork COding based Multicasting (NETCOM) over IEEE 802.11 Multi-hop

    In this paper, we present an analysis of various multicast schemes over IEEE 802.11 multi-hop. Analyzing performance of wireless multicasting communication is important because multicast communication is gaining more and more attention in wireless networks with numerous potential applications. The network coding has recently drawn people's attention and has proven to have benefits when it is applied to multicasting. Multi-hop wireless communication has been extensively investigated as a candidate of next generation wireless communication. When the network coding is used in multi-hop wireless network, we can expect network throughput to be enhanced. Because network coding is in theoretical stage, its performance in existing wireless communication system is not yet fully investigated. We used IEEE 802.11 MAC to apply various multicasting schemes including network coding and presented their performance.

  • Fast overlay tree based on efficient end-to-end measurements

    Most of the application-layer multicast protocols use end-to-end delay as their primary metric. However, for applications such as stored video delivery, meeting a certain target bandwidth requirement is of primary importance. In this paper, we present a centralized approach on how to build a fast overlay tree based on efficient end-to-end measurements. We first investigate how to infer underlay topology (in terms of connectivity) with low measurement cost. Given N end-hosts, traditionally full N(N-1)/2 traceroutes are needed to accurately determine the underlay topology. We propose a much faster heuristic (max-delta) where a server selects appropriate host-pairs to probe in parallel so as to reveal the most information on the underlay in each round. Given an inferred network topology, we then present the algorithm of fast application- layer tree (FAT), which builds an overlay tree of a certain target bandwidth by estimating possible load on each underlay link. Stimulation results show that almost full measurements are needed to discover completely underlay topology. However, substantial reduction in measurements (by almost an order of magnitude) can be achieved if some accuracy, say 5%, can be sacrificed. As compared to traditional ALM protocols such as Narada and overcast, FAT achieves high bandwidth, low link stress, and low RDP.

  • IP Multicast Content Delivery System for Large-Scale Applications

    Various multicast applications and transmission control protocols have a common requirement of content-based transmission. The Internet applications manage a large and widely-dispersed set of users, have multiple data streams that vary in content and media type, and make use of multiple unicast and multicast streams in a single session. The current IP multicast service and architecture do not efficiently support large-scale applications and related transmission control protocols. We propose a framework to model the characteristics of large-scale applications and protocols and their network support. We examine two currently available techniques to scope delivery of content to interested receivers in IP multicast: filtering, where data is filtered by middleware before passed to the application, and addressing, where data is routed only to those receivers that express their interest. We use this framework to evaluate the performance of these applications and related protocols when the network is capable of filtering or addressing

  • Design of scalable interdomain IP multicast architecture

    The current IP multicast architecture does not have enough scalability and is not suitable for the whole Internet, because routing information is too large. We propose the scalable interdomain IP multicast architecture in order to achieve IP multicast communications over the whole Internet. The proposed architecture provides methods to reduce the routing information. We define two kind of multicast addresses, which are called VMA (virtual multicast address) and MAR (multicast address for routing). The VMA is used to identify the multicast group in the intra-domain and MAR is used to forward multicast packets between the interdomain. With the definition of two multicast addresses, multicast address allocation can be more flexible, and routing information can be reduced with address aggregation. We estimate the amount of reduced routing information with our architecture, and evaluate the proposed architecture.

  • An Improved Mobile IP Scheme Based on MobiCast

    MobiCast is a mobile IP multicast algorithm which is used in the scene of small-scale wireless beehive network, it ensures the lowest packetpsilas lost rate when mobile node handovers in the same domain after introducing the concept of domain and domain foreign agent (DFA). Based on MobiCast, An improved scheme is proposed in this paper which introduces ldquoTunnel- schemerdquo between DFA(s) in neighboring domains, and new DFA registers to the multicast group in advance. Moreover, the ware of conform packets is introduced to resolve out of order and reconstruction of multicast packets. Simulation results based on Network Simulator Version 2 show that the improved scheme can reduce the packetpsilas lost rate, the whole handover delay in maximum and enhance the throughput, thereby, it can improve the performance and quality of service of the network as a whole when mobile node handovers between neighboring domains.

  • CRAM: cell re-labeling at merge-points for ATM multicast

    Many distributed multimedia applications involve data delivery from a source to multiple destinations, the participating nodes forming a multicast group. In the naive solution, separate connections can be established from each source to other group members. However a tree can be established for each source with the participants as the leaf nodes or just have one tree spanning all the participants. In this paper, we introduce a data forwarding model to support such shared multicast trees over the ATM networks called CRAM (cell re-labeling at merge-points for ATM multicast). Our work allows VC merging in the MPLS architecture and supports recently proposed wide area multicast protocols (like CBT and PIM) in ATM networks.

  • A distributed multicast multi-rate maxmin flow control protocol

    This paper presents the first distributed multi-rate maxmin rate allocation protocol for multicast traffic. The protocol supports minimum rate guarantee for each receiver as a QoS parameter. The protocol is practical and it maintains a good performance-scalability trade-off. While the network is required to participate, the complexity added by the protocol is minimal.



Standards related to Multicast protocols

Back to Top

IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications

The project defines a standard for high-speed (>100 Mbps at the physical layer) communication devices via electric power lines, so-called broadband over power line (BPL) devices. This standard uses transmission frequencies below 100 MHz. It is usable by all classes of BPL devices, including BPL devices used for the first-mile/last-mile connection (<1500 m to the premise) to broadband services as ...



Jobs related to Multicast protocols

Back to Top