Conferences related to Monolithic integrated circuits

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 IEEE International Electron Devices Meeting (IEDM)

the IEEE/IEDM has been the world's main forum for reporting breakthroughs in technology, design, manufacturing, physics and the modeling of semiconductors and other electronic devices. Topics range from deep submicron CMOS transistors and memories to novel displays and imagers, from compound semiconductor materials to nanotechnology devices and architectures, from micromachined devices to smart -power technologies, etc.


2020 IEEE International Symposium on Circuits and Systems (ISCAS)

The International Symposium on Circuits and Systems (ISCAS) is the flagship conference of the IEEE Circuits and Systems (CAS) Society and the world’s premier networking and exchange forum for researchers in the highly active fields of theory, design and implementation of circuits and systems. ISCAS2020 focuses on the deployment of CASS knowledge towards Society Grand Challenges and highlights the strong foundation in methodology and the integration of multidisciplinary approaches which are the distinctive features of CAS contributions. The worldwide CAS community is exploiting such CASS knowledge to change the way in which devices and circuits are understood, optimized, and leveraged in a variety of systems and applications.


2020 IEEE Radio and Wireless Symposium (RWS)

RWW2020 will be an international conference covering all aspects of radio and wireless. RWW2020's multidisciplinary events will bring together innovations that are happening across the broad wireless spectrum. RWS2020, this conference application, acts as the main conference for the entire RWW of events that includes the following conferences: PAWR2020, SiRF2020, WiSNet2020, and TWiOS2020 (IEEE Topical Conference on RF/microwave Power Amplifiers, IEEE Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems, IEEE Topical Conference on Wireless Sensors and Sensor Networks, and IEEE Topical Workshop on the Internet of Space IoS, respectively). In addition to traditional podium presentations and poster sessions, tracks for IEEE Distinguished Lectures, Sunday half-day workshops, Monday panels, and a demo session are planned. A RWW2020 plenary talk are a parallel IoT Summit are planned. A student competition is also planned.

  • 2019 IEEE Radio and Wireless Symposium (RWS)

    This is a conference with a focus on wireless components, applications, and systems that impact both our current and future life style. The conference's main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today's design compromises can trigger tomorrow's advanced technologies. Where dreams can become a reality. RWS is the cornerstone conference for Radio Wireless Week.

  • 2018 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today’s design compromises can trigger tomorrow’s advanced technologies. Where dreams can become a reality.

  • 2017 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today’s design compromises can trigger tomorrow’s advanced technologies. Where dreams can become a reality.

  • 2016 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be bench-marked against the needs of circuit designers at the bleeding edge of RF systems, where today

  • 2015 IEEE Radio and Wireless Symposium (RWS)

    This is a set of five conferences with a focus on wireless components, applications, and systems that effect both now and our future life style. These conferences main niche is to bring together technologists, circuit designers, system designers, and entrepreneurs at a single event. It was and is the place where these worlds meet, where new processes and systems can be benchmarked against the needs of circuit designers at the bleeding edge of RF systems, where today

  • 2014 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss hardware design and system performance of the state -of-the-art wireless systems. Includes an expanded program on the latest information on wireless communications and networking, and associated enabling technologies as new services and applications emerge.

  • 2013 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss hardware design and system performance of the state-of-the-art wireless systems. Includes an expanded program on the latest information on wireless communications and networking, and associated enabling technologies as new services and applications emerge.

  • 2012 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss hardware design and system performance of the state-of-the-art wireless systems. Includes an expanded program on the latest information on wireless communications and networking, and associated enabling technologies as new services and applications emerge.

  • 2011 IEEE Radio and Wireless Symposium (RWS)

    All aspects of components and systems related to radio and wireless networks.

  • 2010 IEEE Radio and Wireless Symposium (RWS)

    RWS focuses on the intersection between radio systems and wireless technology, which creates a unique forum for engineers to discuss various aspects of wireless communication systems and the state-of-the-art in both fields by exploring the connections between hardware design and system performance.

  • 2009 IEEE Radio and Wireless Symposium (RWS)

    This symposium highlights the state of the art of hardware and systems of radio and wireless

  • 2008 IEEE Radio and Wireless Symposium (RWS)

  • 2007 IEEE Radio and Wireless Symposium (RWS)

  • 2006 IEEE Radio and Wireless Symposium (RWS)

  • 2004 IEEE Radio and Wireless Conference - (RAWCON 2004)

  • 2003 IEEE Radio and Wireless Conference - (RAWCON 2003)

  • 2002 IEEE Radio and Wireless Conference - (RAWCON 2002)

  • 2001 IEEE Radio and Wireless Conference - (RAWCON 2001)

  • 2000 IEEE Radio and Wireless Conference - (RAWCON 2000)

  • 1999 IEEE Radio and Wireless Conference - (RAWCON '99)

  • 1998 IEEE Radio and Wireless Conference - (RAWCON '98)


More Conferences

Periodicals related to Monolithic integrated circuits

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Communications, IEEE Transactions on

Telephone, telegraphy, facsimile, and point-to-point television, by electromagnetic propagation, including radio; wire; aerial, underground, coaxial, and submarine cables; waveguides, communication satellites, and lasers; in marine, aeronautical, space and fixed station services; repeaters, radio relaying, signal storage, and regeneration; telecommunication error detection and correction; multiplexing and carrier techniques; communication switching systems; data communications; and communication theory. In addition to the above, ...


Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on

Methods, algorithms, and human-machine interfaces for physical and logical design, including: planning, synthesis, partitioning, modeling, simulation, layout, verification, testing, and documentation of integrated-circuit and systems designs of all complexities. Practical applications of aids resulting in producible analog, digital, optical, or microwave integrated circuits are emphasized.


Computers, IEEE Transactions on

Design and analysis of algorithms, computer systems, and digital networks; methods for specifying, measuring, and modeling the performance of computers and computer systems; design of computer components, such as arithmetic units, data storage devices, and interface devices; design of reliable and testable digital devices and systems; computer networks and distributed computer systems; new computer organizations and architectures; applications of VLSI ...


Consumer Electronics, IEEE Transactions on

The design and manufacture of consumer electronics products, components, and related activities, particularly those used for entertainment, leisure, and educational purposes


More Periodicals

Most published Xplore authors for Monolithic integrated circuits

Back to Top

No authors for "Monolithic integrated circuits"


Xplore Articles related to Monolithic integrated circuits

Back to Top

IEE Colloquium on 'Power Integrated Circuits' (Digest No.34)

IEE Colloquium on Power Integrated Circuits, 1989

None


Compatible analog/digital techniques for a monolithic process

1975 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1975

The significant economic and performance advantages which may be realized over conventional monolithic techniques by employing, on a monolithic process, digital devices or compatible analog and digital devices to provide either analog and digital functions or improve analog circuit performance, will be assessed.


Monolithic IC power switch for automotive applications

1986 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1986

None


A 2.5 Gbit/s GaAs clock and data regenerator IC

12th Annual Symposium on Gallium Arsenide Integrated Circuit (GaAs IC), 1990

Monolithic integration of a clock and data regenerator operating at 2.5 Gbit/s has been achieved using analog design techniques applied to a GaAs heterojunction FET (HFET) process. The GaAs IC, which performs clock and data regeneration functions for high-speed fiber-optic transmission systems, is presented. This IC, in conjunction with a companion Si bipolar circuit, can regenerate pseudorandom NRZ data error-free ...


A high-performance, miniaturized X-band active mixer for DBS receiver application with on-chip IF noise filter

IEEE Transactions on Microwave Theory and Techniques, 1990

A GaAs monolithic microwave integrated circuit (MMIC) dual-gate FET active mixer at X-band is described that is designed for direct broadcast satellite (DBS) applications. All of the components of the mixer, including biasing circuitry, RF, LO, and IF matching networks, as well as the IF noise filter, are implemented monolithically into a 25-mil*30-mil area. The design was process tolerant, and ...


More Xplore Articles

Educational Resources on Monolithic integrated circuits

Back to Top

IEEE-USA E-Books

  • IEE Colloquium on 'Power Integrated Circuits' (Digest No.34)

    None

  • Compatible analog/digital techniques for a monolithic process

    The significant economic and performance advantages which may be realized over conventional monolithic techniques by employing, on a monolithic process, digital devices or compatible analog and digital devices to provide either analog and digital functions or improve analog circuit performance, will be assessed.

  • Monolithic IC power switch for automotive applications

    None

  • A 2.5 Gbit/s GaAs clock and data regenerator IC

    Monolithic integration of a clock and data regenerator operating at 2.5 Gbit/s has been achieved using analog design techniques applied to a GaAs heterojunction FET (HFET) process. The GaAs IC, which performs clock and data regeneration functions for high-speed fiber-optic transmission systems, is presented. This IC, in conjunction with a companion Si bipolar circuit, can regenerate pseudorandom NRZ data error-free at rates exceeding 2.5 Gbit/s with a sensitivity of 25 mV. The recovered clock has less than 7-ps RMS edge jitter. The chip draws 250 mA from a single 5.2 V ECL-compatible power supply.<>

  • A high-performance, miniaturized X-band active mixer for DBS receiver application with on-chip IF noise filter

    A GaAs monolithic microwave integrated circuit (MMIC) dual-gate FET active mixer at X-band is described that is designed for direct broadcast satellite (DBS) applications. All of the components of the mixer, including biasing circuitry, RF, LO, and IF matching networks, as well as the IF noise filter, are implemented monolithically into a 25-mil*30-mil area. The design was process tolerant, and layout was compact for manufacturability and low cost. The mixer was integrated monolithically into a complete single-chip DBS low- noise block (LNB) converter. The active mixer has a conversion gain of 5.5 dB and a single-sideband noise figure of 8.5 dB. The circuit is manufactured using a 0.5- mu m gate length, buried p/sup -/ depletion mode MESFET process without substrate-through via holes.<<ETX>>

  • GaAs MMICs for EHF SATCOM ground terminals

    The authors address the potential uses of GaAs, MMICs, and their benefits, for EHF ground terminals. This assessment of GaAs MMICs (monolithic microwave integrated circuits), while concentrating on the analog RF front end, also includes some associated critical digital functions. Performance requirements and specific application areas, such as 20-GHz low-noise amplifiers and 44-GHz power amplifiers, are discussed and current state-of-the-art performance in low-noise high-electron-mobility transistors (HEMTs) and high efficiency pseudomorphic HEMTs is presented, along with projected performance improvements over the next five years.<<ETX>>

  • Ultra compact RFICs using three-dimensional MMIC technology

    Since the 1980s, NTT has been developing three- dimensional (3D) monolith microwave integrated circuits (MMICs) to achieve small-size and low-cost ICs. The usage of 3D MMICs is a very powerful technique, especially at quasi- millimeter and millimeter wave. We describe the structure and features of 3D MMICs, introduce several MMIC subsystems, and point out future directions and plans for using 3D MMICs.

  • CAD for GaAs MMIC manufacturability

    Beginning in 1974, a program of structured experimental and theoretical research has led to a compact, physics-based description of the GaAs FET which forms the nucleus of a collection of CAD tools for MMIC (monolithic microwave IC) design. The objective of physics-based CAD is to allow circuit designers and foundry operators to account properly for the likely effects of process variations in advance of MMIC fabrication, and to offer a diagnostic capability to help detect the origin of failures when chips are out-of- specification.<>

  • A practical distributed FET mixer for MMIC applications

    A novel distributed FET mixer configuration suitable for MMIC (monolithic microwave integrated circuit) realization has been demonstrated in hybrid form. An active distributed signal combiner is used at the input of a single- gate FET mixer. The hybrid prototype has achieved 3 dB+or-1 dB conversion gain from 2 to 12 GHz for an LO (local oscillator) power of 6 dBm. The measured single-sideband noise figure is 11 dB over most of the band.<<ETX>>

  • Wideband frequency converter IC for VHF TV tuner

    A monolithic IC using a silicon nitride passivative self-aligned 4GHz bipolar process for a wideband frequency converter with a conversion gain of 34dB and bandwidth of 600MHz will be reported. Converter consist of a mixer, oscillator and IF amplifier.



Standards related to Monolithic integrated circuits

Back to Top

No standards are currently tagged "Monolithic integrated circuits"


Jobs related to Monolithic integrated circuits

Back to Top