Conferences related to Molecular sieves

Back to Top

2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted papers will be peer reviewed. Accepted high quality papers will be presented in oral and postersessions, will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII)

The world's premiere conference in MEMS sensors, actuators and integrated micro and nano systems welcomes you to attend this four-day event showcasing major technological, scientific and commercial breakthroughs in mechanical, optical, chemical and biological devices and systems using micro and nanotechnology.The major areas of activity in the development of Transducers solicited and expected at this conference include but are not limited to: Bio, Medical, Chemical, and Micro Total Analysis Systems Fabrication and Packaging Mechanical and Physical Sensors Materials and Characterization Design, Simulation and Theory Actuators Optical MEMS RF MEMS Nanotechnology Energy and Power


2019 IEEE 19th International Conference on Nanotechnology (IEEE-NANO)

DNA Nanotechnology Micro-to-nano-scale Bridging Nanobiology and Nanomedicine Nanoelectronics Nanomanufacturing and Nanofabrication Nano Robotics and Automation Nanomaterials Nano-optics, Nano-optoelectronics and Nanophotonics Nanofluidics Nanomagnetics Nano/Molecular Heat Transfer & Energy Conversion Nanoscale Communication and Networks Nano/Molecular Sensors, Actuators and Systems


2019 IEEE 9th International Nanoelectronics Conferences (INEC)

Topics of Interests (but not limited to)• Application of nanoelectronic• Low-dimensional materials• Microfluidics/Nanofluidics• Nanomagnetic materials• Carbon materials• Nanomaterials• Nanophotonics• MEMS/NEMS• Nanoelectronic• Nanomedicine• Nano Robotics• Spintronic devices• Sensor and actuators• Quality and Reliability of Nanotechnology


More Conferences

Periodicals related to Molecular sieves

Back to Top

Electrical Insulation Magazine, IEEE

The magazine covers theory, analysis, design (computer-aided design), and practical implementation of circuits, and the application of circuit theoretic techniques to systems and to signal processing. Content is written for the spectrum of activities from basic scientific theory to industrial applications.


Industry Applications, IEEE Transactions on

The development and application of electric systems, apparatus, devices, and controls to the processes and equipment of industry and commerce; the promotion of safe, reliable, and economic installations; the encouragement of energy conservation; the creation of voluntary engineering standards and recommended practices.


Instrumentation and Measurement, IEEE Transactions on

Measurements and instrumentation utilizing electrical and electronic techniques.


Magnetics, IEEE Transactions on

Science and technology related to the basic physics and engineering of magnetism, magnetic materials, applied magnetics, magnetic devices, and magnetic data storage. The Transactions publishes scholarly articles of archival value as well as tutorial expositions and critical reviews of classical subjects and topics of current interest.


Neural Systems and Rehabilitation Engineering, IEEE Transactions on

Rehabilitation aspects of biomedical engineering, including functional electrical stimulation, acoustic dynamics, human performance measurement and analysis, nerve stimulation, electromyography, motor control and stimulation, and hardware and software applications for rehabilitation engineering and assistive devices.


More Periodicals

Most published Xplore authors for Molecular sieves

Back to Top

Xplore Articles related to Molecular sieves

Back to Top

Magnetization Reversal in (CoNi/Pt)N Dots Connected to a Large Area through Submicron Wide Channels

1998 IEEE International Magnetics Conference (INTERMAG), 1998

None


Study on preparation of ZnO doped Mesoporous TiO<inf>2</inf>Microspheres and its Photocatalytic properties

2011 International Conference on Remote Sensing, Environment and Transportation Engineering, 2011

Ti(OC4H9)4and Zn(NO3)2can be used as raw materials to make ZnO / Mesoporous TiO2Nano-assembly with Ultrasound-Hydrothermal method. The purpose of the research is to study the influence of Water Temperature and Ultrasonic treatment on the Crystalline and Microstructure of the Assembly. The results show that Ultrasonic treatment can stimulate Ti(OBu)4s Hydrolysis -condensation and Homogeneous nucleation, which is the key factor to ...


Effect of Molecular Sieve on Transient Output-Reduction and Laser Parameters in DC Discharged/Room Temperature Operated FAF CO Laser

CLEO/Europe Conference on Lasers and Electro-Optics, 1998

None


Nanofluidic Devices for Rapid Analysis of DNA and Proteins

2007 Digest of the IEEE/LEOS Summer Topical Meetings, 2007

A new class of nanofluidic filter array devices were designed and fabricated to perform rapid separation (both analytical and preparative) of DNA and proteins covering very broad biological size scales. By virtue of its separation efficiency, gel-free operation, ease of sample recovery and high throughput, these nanofluidic filter array devices hold great promise for an integrated biomolecule sample preparation and ...


Adsorptive Removal of p-chloronitrobenzene (pCNB) by Mesoporous Silica HMS from Aqueous Solution

2009 International Conference on Energy and Environment Technology, 2009

Adsorption of p-chloronitrobenzene(pCNB) onto mesoporous molecular sieves (HMS) from aqueous solution has been investigated systematically using batch experiments in this study. Results indicate that p-chloronitrobenzene(pCNB) adsorption is initially rapid and the adsorption process reaches a steady state after 1 minute. The adsorption isotherms are well described by the Langmuir and the Freundlich models. The effects of temperature and pH are ...


More Xplore Articles

Educational Resources on Molecular sieves

Back to Top

IEEE.tv Videos

Molecular Cellular Networks: A Non von Neumann Architecture for Molecular Electronics - Craig Lent: 2016 International Conference on Rebooting Computing
EMBC 2011-Program-Systems in Synthetic Biology (Part I)-Bruce Tidor
Part Two: Interview with John Tisdale—IEEE VIC Summit 2018
Electric-field Bit Write-in for Molecular Quantum-dot Cellular Automata - Enrique Blair - ICRC 2018
Molecular Diagnostics for STIs - Gary Schoolnik - IEEE EMBS at NIH, 2019
Q&A with Jo Jo Platt, IEEE Brain Podcast, Episode 14
Part 1: Interview with John Tisdale—IEEE VIC Summit 2018
Robotics History: Narratives and Networks Oral Histories: Richard Murray
EMBC 2011-Keynote Lectures and Panel Discussion-PT I-Subra Suresh
ICASSP 2010 - Advances in Neural Engineering
Unmet Needs for POC Technology: HIV/AIDS - Ronald Collman - IEEE EMBS at NIH, 2019
POC AAT-based Diagnostic Technology - Paul Yager - IEEE EMBS at NIH, 2019
IMS 2015: Chris Walker - John Tucker Special Tribute - SuperCam: A 64 Pixel SIS Receiver Array for Submillimeter-wave Astronomy
Synthetic Biology: Gene Editing’s Role in Diagnostics - Andrew Ellington - IEEE EMBS at NIH, 2019
Unmet Needs in the Diagnosis and Management of TB - Richard Chaisson - IEEE EMBS at NIH, 2019
Implantable, Insertable and Wearable Micro-optical Devices for Early Detection of Cancer - Plenary Speaker, Christopher Contag - IPC 2018
Long & Winding Road From Technology to Products - Keynote David Alland - IEEE EMBS at NIH, 2019
Panel: Unmet Needs in HIV/AIDS & TB Diagnosis & Management - IEEE EMBS at NIH, 2019
Q&A with Kip Ludwig: IEEE Brain Podcast, Episode 7
Paper & Microfluidic Systems for Infectious Disease Diagnostics - Catherine Klapperich - IEEE EMBS at NIH, 2019

IEEE-USA E-Books

  • Magnetization Reversal in (CoNi/Pt)N Dots Connected to a Large Area through Submicron Wide Channels

    None

  • Study on preparation of ZnO doped Mesoporous TiO<inf>2</inf>Microspheres and its Photocatalytic properties

    Ti(OC4H9)4and Zn(NO3)2can be used as raw materials to make ZnO / Mesoporous TiO2Nano-assembly with Ultrasound-Hydrothermal method. The purpose of the research is to study the influence of Water Temperature and Ultrasonic treatment on the Crystalline and Microstructure of the Assembly. The results show that Ultrasonic treatment can stimulate Ti(OBu)4s Hydrolysis -condensation and Homogeneous nucleation, which is the key factor to get Mesoporous Microspheres with the features of Morphologyrules and Particle size distribution. After the process of Ultrasonic water treatment with 150°C, the sample not only has big surface area, good degree of crystallization and much smaller grain size ,but also increases Photodegradation reaction rate constant to Methyl orange to 0.15 min-1, which shows good Photocatalytic properties.

  • Effect of Molecular Sieve on Transient Output-Reduction and Laser Parameters in DC Discharged/Room Temperature Operated FAF CO Laser

    None

  • Nanofluidic Devices for Rapid Analysis of DNA and Proteins

    A new class of nanofluidic filter array devices were designed and fabricated to perform rapid separation (both analytical and preparative) of DNA and proteins covering very broad biological size scales. By virtue of its separation efficiency, gel-free operation, ease of sample recovery and high throughput, these nanofluidic filter array devices hold great promise for an integrated biomolecule sample preparation and analysis system.

  • Adsorptive Removal of p-chloronitrobenzene (pCNB) by Mesoporous Silica HMS from Aqueous Solution

    Adsorption of p-chloronitrobenzene(pCNB) onto mesoporous molecular sieves (HMS) from aqueous solution has been investigated systematically using batch experiments in this study. Results indicate that p-chloronitrobenzene(pCNB) adsorption is initially rapid and the adsorption process reaches a steady state after 1 minute. The adsorption isotherms are well described by the Langmuir and the Freundlich models. The effects of temperature and pH are also examined. According to the experimental results, the amount of pchloronitrobenzene(pCNB) adsorbed decreases with increases of temperature from 288 to 308 K and pH from 2.0 to 11.0. The desorption process shows a reversibility of pchloronitrobenzene adsorption onto HMS. Based on the results, it suggests that the adsorption is primarily brought about by hydrogen bonding between p-chloronitrobenzene and HMS surface.

  • Gas integrity and adsorbent performance in an SF/sub 6/ circuit breaker after test duty

    A quality assessment of the SF/sub 6/ insulating gas in a circuit breaker following test duty was performed. In addition, exploratory research was undertaken to characterize the performance of adsorbent materials in relation to by-product dynamics. Gas samples were analyzed and revealed decomposition up to 16%. The usual by-products were identified; SOF/sub 2/ and SO/sub 2/ had the highest concentrations. Thermal desorption of the contaminated molecular sieve was successfully achieved. The thermally desorbed gaseous products correlated with the usual SF/sub 6/ by-products which resulted from arcing.<<ETX>>

  • Techniques for Monitoring and Analysis of Environmental Tritium

    Routine sampling techniques are acceptable for environmental tritium, although attention must be paid to the chemical and physical state of the tritium. Liquid scintillation and gas counting techniques are both acceptable for counting tritium, with gas counting being the most sensitive. Sensitivities for tritium can be increased greatly by electrolytic enrichment before counting.

  • Photocatalytic Degradation of Azo Dye Active Brilliant Red X-3B by Composite Materials of TiO2 and 13X Molecular Sieves

    Titanium-doped 13X molecular sieves (Ti/13X) were successfully prepared by the impregnation method. The incorporation of Ti into the representative Ti/13X sample with a large number of wormhole-like channels was readily established by both X-ray diffraction (XRD) patterns and scanning electron microscopic (SEM) micrographs. The photocatalytic efficiency of various Ti/13X samples was then evaluated by their ability of removing a reactive dye X-3B from the artificial dye wastewater. Several major factors which might govern the photocatalytic reaction, such as the dosage of Ti/13X, reaction time, pH and concentration of X-3B were thus considered and checked. Finally, we found that the degradation reaction of Ti/13X with X-3B fitted well into the first-order kinetics.

  • The effect of "Radial radiation transport" on the interpretation of laser saturation parameter measurements

    None

  • Size-Selective Adsorption in Separation of Products from Pyrogallol and Methyl Linoleate Oxidative Coupling Reaction

    Biodiesel is a renewable, with high combustion efficiency but low emission as a replacement of limited reserves of petrodiesel. On the other hand, biodiesel as a fuel has a problem caused by its instability against oxidative degradation. This reaction might decrease the quality of biodiesel as the product of the reaction potentially harm the diesel engine during combustion. Therefore, antioxidant additive should be added to biodiesel to prevent the oxidative degradation. Among several phenolic antioxidants, pyrogallol has been known/mentioned as one of the best antioxidant additive for biodiesel. However, the solubility of pyrogallol in biodiesel is relatively low. In the previous study, the addition of alkyl group to pyrogallol's benzene ring has been done in order to increase the solubility of pyrogallol in biodiesel. Pyrogallol was reacted with methyl linoleate through oxidative coupling reaction using 2,2-diphenyl-1-picryhidazyl (DPPH) resulting a new synthesized product. Unfortunately, the reaction resulted a mixture of products containing unreacted pyrogallol, DPPH, dimer of pyrogallol, and low concentration of the synthesized product. The synthesized product was separated from the mixture to get the higher concentration. The difference in molecular size led to the separation of synthesized product from the mixture through molecular sieve zeolites. Zeolites has been widely used as molecular sieve to separate the mixture based on molecular size. In this research, the product mixture was separated based on the molecular size through adsorption using 3 types of zeolites which has different pore sizes: SAPO34 (4Å), Na-Y (7Å) and 13X(10Å). The result confirmed that different pore size of zeolites could successfully separate the synthesized product from other components in the mixture.



Standards related to Molecular sieves

Back to Top

No standards are currently tagged "Molecular sieves"


Jobs related to Molecular sieves

Back to Top