Conferences related to Military standards

Back to Top

2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


2020 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI)

This symposium pertains to the field of electromagnetic compatibility.


ICASSP 2020 - 2020 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP)

The ICASSP meeting is the world's largest and most comprehensive technical conference focused on signal processing and its applications. The conference will feature world-class speakers, tutorials, exhibits, and over 50 lecture and poster sessions.


Oceans 2020 MTS/IEEE GULF COAST

To promote awareness, understanding, advancement and application of ocean engineering and marine technology. This includes all aspects of science, engineering, and technology that address research, development, and operations pertaining to all bodies of water. This includes the creation of new capabilities and technologies from concept design through prototypes, testing, and operational systems to sense, explore, understand, develop, use, and responsibly manage natural resources.

  • OCEANS 2018 MTS/IEEE Charleston

    Ocean, coastal, and atmospheric science and technology advances and applications

  • OCEANS 2017 - Anchorage

    Papers on ocean technology, exhibits from ocean equipment and service suppliers, student posters and student poster competition, tutorials on ocean technology, workshops and town meetings on policy and governmental process.

  • OCEANS 2016

    The Marine Technology Scociety and the Oceanic Engineering Society of the IEEE cosponor a joint annual conference and exposition on ocean science, engineering, and policy. The OCEANS conference covers four days. One day for tutorials and three for approx. 500 technical papers and 150 -200 exhibits.

  • OCEANS 2015

    The Marine Technology Scociety and the Oceanic Engineering Society of the IEEE cosponor a joint annual conference and exposition on ocean science, engineering, and policy. The OCEANS conference covers four days. One day for tutorials and three for approx. 450 technical papers and 150-200 exhibits.

  • OCEANS 2014

    The OCEANS conference covers four days. One day for tutorials and three for approx. 450 technical papers and 150-200 exhibits.

  • OCEANS 2013

    Three days of 8-10 tracks of technical sessions (400-450 papers) and concurent exhibition (150-250 exhibitors)

  • OCEANS 2012

    Ocean related technology. Tutorials and three days of technical sessions and exhibits. 8-12 parallel technical tracks.

  • OCEANS 2011

    The Marine Technology Society and the Oceanic Engineering Scociety of the IEEE cosponsor a joint annual conference and exposition on ocean science engineering, and policy.

  • OCEANS 2010

    The Marine Technology Society and the Oceanic Engineering Scociety of the IEEE cosponsor a joint annual conference and exposition on ocean science engineering, and policy.

  • OCEANS 2009

  • OCEANS 2008

    The Marine Technology Society (MTS) and the Oceanic Engineering Society (OES) of the Institute of Electrical and Electronic Engineers (IEEE) cosponsor a joint conference and exposition on ocean science, engineering, education, and policy. Held annually in the fall, it has become a focal point for the ocean and marine community to meet, learn, and exhibit products and services. The conference includes technical sessions, workshops, student poster sessions, job fairs, tutorials and a large exhibit.

  • OCEANS 2007

  • OCEANS 2006

  • OCEANS 2005

  • OCEANS 2004

  • OCEANS 2003

  • OCEANS 2002

  • OCEANS 2001

  • OCEANS 2000

  • OCEANS '99

  • OCEANS '98

  • OCEANS '97

  • OCEANS '96


More Conferences

Periodicals related to Military standards

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Broadcasting, IEEE Transactions on

Broadcast technology, including devices, equipment, techniques, and systems related to broadcast technology, including the production, distribution, transmission, and propagation aspects.


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


More Periodicals

Most published Xplore authors for Military standards

Back to Top

No authors for "Military standards"


Xplore Articles related to Military standards

Back to Top

Grateful Acknowledgment

IRE Transactions on Product Engineering and Production, 1961

None


Abstract: Power Line Filter Pass Band Versus Stop Band

1977 IEEE International Symposium on Electromagnetic Compatibility, 1977

None


EMC Aspects of Phased Array Radars with Multiple Final Amplifiers

1982 IEEE International Symposium on Electromagnetic Compatibility, 1982

None


Progress on the SAE Aerospace Standard for Beginning of Life FIber Optic Cable Assembly Inspection and Testing

IEEE Conference Avionics Fiber-Optics and Photonics, 2006., 2006

The SAE AS3 avionics fiber optics standardization committee has recognized a need for a testing and inspection document for beginning of life of fiber optic cable assemblies used in military/aerospace applications. The intent of the document is to provide a standard that the supplier can use to inspect and test cables prior to shipment to the customer, then when the ...


Impact of Reference Voltage on the ELDRS Characteristics of the LM4050 Shunt Voltage Reference

2011 IEEE Radiation Effects Data Workshop, 2011

Two different reference voltage options (2.5V and 5.0V) of National Semiconductor's LM4050WGxxRLQV shunt voltage reference were put through Total Ionizing Dose (TID) testing at High Dose Rate (HDR) and Low Dose Rate (LDR) with different biasing conditions during irradiation and showed different sensitivities to the different dose rates and bias conditions. Another product, DS16F95WxFQMLV, that uses the same wafer fabrication ...


More Xplore Articles

Educational Resources on Military standards

Back to Top

IEEE-USA E-Books

  • Grateful Acknowledgment

    None

  • Abstract: Power Line Filter Pass Band Versus Stop Band

    None

  • EMC Aspects of Phased Array Radars with Multiple Final Amplifiers

    None

  • Progress on the SAE Aerospace Standard for Beginning of Life FIber Optic Cable Assembly Inspection and Testing

    The SAE AS3 avionics fiber optics standardization committee has recognized a need for a testing and inspection document for beginning of life of fiber optic cable assemblies used in military/aerospace applications. The intent of the document is to provide a standard that the supplier can use to inspect and test cables prior to shipment to the customer, then when the customer receives the cables, the assemblies can be checked in the same manner to verify both results are the same. The SAE subcommittee assigned the writing of this standard to the AS3C3 JELLI sub-group for jumpers, endface, link loss and inspection

  • Impact of Reference Voltage on the ELDRS Characteristics of the LM4050 Shunt Voltage Reference

    Two different reference voltage options (2.5V and 5.0V) of National Semiconductor's LM4050WGxxRLQV shunt voltage reference were put through Total Ionizing Dose (TID) testing at High Dose Rate (HDR) and Low Dose Rate (LDR) with different biasing conditions during irradiation and showed different sensitivities to the different dose rates and bias conditions. Another product, DS16F95WxFQMLV, that uses the same wafer fabrication process had a different TID response.

  • Research on the standard of IETM data format based on GJB6600

    Standard is the precondition of IETM, and the data format is the core of IETM, standardized IETM data format will regulate the IETM technology information, and improve the use efficiency and the management of IETM. Many countries have established their own series of IETM technology standard, which is the standardized management for development of IETM. Our country also established the IETM standard suitable for our army--GJB6600. This paper has carried the international standard data format of IETM on the contrast analysis, and researched on the data model regulated by the GJB6600 IETM data format standard. It also analyses the data module structure, the data module coding structure and the data module logic structure of GJB6600 data format, and to conclude the advantages of this kind of data model. This paper has great help for the development of our country and the IETM technology of our army.

  • The Corps Battle Simulation: remodeling the model for new missions

    During the mid 1980's the U.S. Army established the Corps Battle Simulation (CBS) as a standard tool for training commanders and their staffs. The CBS's architecture is typical of constructive training built during that era. It primarily models high intensity conflict in traditional theaters of operation. The technologies used in its construction reflect the wars then considered likely, the limited capability of uniprocessor computers, and third-generation distributed software environments. Nevertheless, the Army needs training tools that support emerging missions such as Low Intensity Conflict, multi-factional scenarios, Operations Other Than War, and joint and combined training. This paper describes the techniques used to transform the Corps Battle Simulation. To meet the needs of the late 1990's the large-scale force-on-force modeling paradigms are being replaced with representations more appropriate to the emerging world environment. The primary technology used to accomplish this transformation is called "Resolution Detailing" wherein new, more detailed and flexible functionality is selectively inserted without disturbing the overall workings of the system. Resolution Detailing permits the Army to specify focused areas for upgrade without perturbing overall system operation.

  • A proposed standard test bus and boundary scan architecture

    The author describes the test interface and boundary scan architecture proposed in the Joint Test Action Group (JTAG) 2.0 specification. The test access port described in the JTAG specification meets the requirements for a standard serial test interface. The architecture is flexible enough to support test structures ranging from boundary scan to the sophisticated maintenance and support structures required in the high end military and commercial arena of the electronics industry. Features discussed include the test access port, the instruction register, and the data register.<<ETX>>

  • Correction

    None

  • Matching new TPS applications to existing ATE

    This paper details a successful method of selecting Automated Test Equipment (ATE) to host new Test Program Set (TPS) requirements. It explains the purpose of detailed analyses, understanding customer requirements, and ATE selection criteria. It also highlights required and other available sources of data such as MIL-HDBK-300, SEAMs electronic database, commercial catalogs, etc. The methodology compares potential Units Under Test (UUTs) requirements with existing ATE stimulus and measurement capabilities. It utilizes a matrix format, which allows engineers to easily identify and compare potential ATE hosts for any UUT set. This method also provides a historical record for future opportunities.<<ETX>>




Jobs related to Military standards

Back to Top