Conferences related to Metal products

Back to Top

2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm)

The ITherm Conference series is the leading international venue for scientific and engineering exploration of thermal, thermomechanical, and emerging technology issues associated with electronic devices, packages, and systems.


2020 IEEE IAS Petroleum and Chemical Industry Committee (PCIC)

The PCIC provides an international forum for the exchange of electrical applications technology related to the petroleum and chemical industry. The PCIC annual conference is rotated across North American locations of industry strength to attract national and international participation. User, manufacturer, consultant, and contractor participation is encouraged to strengthen the conference technical base. Success of the PCIC is built upon high quality papers, individual recognition, valued standards activities, mentoring, tutorials, networking and conference sites that appeal to all.


2020 IEEE Industry Applications Society Annual Meeting

The Annual Meeting is a gathering of experts who work and conduct research in the industrial applications of electrical systems.


2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)

All topics related to engineering and technology management, including applicable analytical methods and economical/social/human issues to be considered in making engineering decisions.


2020 IEEE International Conference on Industrial Technology (ICIT)

ICIT focuses on industrial and manufacturing applications of electronics, controls, communications, instrumentation, and computational intelligence.


More Conferences

Periodicals related to Metal products

Back to Top

Advanced Packaging, IEEE Transactions on

The IEEE Transactions on Advanced Packaging has its focus on the modeling, design, and analysis of advanced electronic, photonic, sensors, and MEMS packaging.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Circuits and Systems II: Express Briefs, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


Components and Packaging Technologies, IEEE Transactions on

Component parts, hybrid microelectronics, materials, packaging techniques, and manufacturing technology.


More Periodicals

Most published Xplore authors for Metal products

Back to Top

Xplore Articles related to Metal products

Back to Top

IEEE Draft Standard for Indoor AC Switches (1 kV-38 kV) for Use in Metal-Enclosed Switchgear

IEEE PC37.20.4/D7, August 2012, 2012

Indoor ac medium-voltage switches for use in enclosures for application in power circuitsat voltages above 1 kV through 38 kV are covered. These include stationary or drawout, manual orpower operation, fused or unfused.


An improved interlevel dielectric process for submicron double-level metal products

Proceedings., Sixth International IEEE VLSI Multilevel Interconnection Conference, 1989

An improved interlevel dielectric (ILD) deposition process is presented for submicron double-level metal products that use a multichamber tool capable of doing both CVD film deposition and etching. This multistep, multitool process has now been integrated into a single cassette-to-cassette operation. By using both plasma-enhanced and thermal CVD TEOS oxide films together with argon sputtering and anisotropic oxide etching, an ...


Features of metal products treatment in nitric acid

Proceedings of the 9th International Scientific and Practical Conference of Students, Post-graduates Modern Techniques and Technologies, 2003. MTT 2003., 2003

Reactions of metals with nitric acid have been studied for a long time and are widely used in technologies of chemical etching and polishing of products made of metals and alloys. High values of the redox potentials of nitric acid solutions allow to carry out the operations of the oxides film removal from the metal surface and to etch the ...


Morphological control in desktop manufacturing by distributed attraction optimization methods

Proceedings of the 38th IEEE Conference on Decision and Control (Cat. No.99CH36304), 1999

Rapid prototyping techniques employing thermal material deposition are intended for direct fabrication of functional metal products and tooling. This article introduces an analytical model of such material transfer processes, using superposition of unit deposition distributions, composed of elementary ellipsoid primitives. The real-time surface geometry model, with its parameters identified by in-process profile measurements, is used for Smith- prediction of the ...


Sheet metal design with the aid of Product Data Management (PDM) systems

2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), 2013

Product Data Management (PDM) systems were created in the early of 1980s. The development has increased rapidly in these, and also in different CAD-systems. However, there still occur problems in linking these two systems together and getting the full benefit out from the PDM system. Modern PDM systems, together with CAD softwares, do not take into account the different design ...


More Xplore Articles

Educational Resources on Metal products

Back to Top

IEEE-USA E-Books

  • IEEE Draft Standard for Indoor AC Switches (1 kV-38 kV) for Use in Metal-Enclosed Switchgear

    Indoor ac medium-voltage switches for use in enclosures for application in power circuitsat voltages above 1 kV through 38 kV are covered. These include stationary or drawout, manual orpower operation, fused or unfused.

  • An improved interlevel dielectric process for submicron double-level metal products

    An improved interlevel dielectric (ILD) deposition process is presented for submicron double-level metal products that use a multichamber tool capable of doing both CVD film deposition and etching. This multistep, multitool process has now been integrated into a single cassette-to-cassette operation. By using both plasma-enhanced and thermal CVD TEOS oxide films together with argon sputtering and anisotropic oxide etching, an effective low-temperature, void- free interlevel dielectric is formed in a manner that also reduces wafer handling and process queuing time.<<ETX>>

  • Features of metal products treatment in nitric acid

    Reactions of metals with nitric acid have been studied for a long time and are widely used in technologies of chemical etching and polishing of products made of metals and alloys. High values of the redox potentials of nitric acid solutions allow to carry out the operations of the oxides film removal from the metal surface and to etch the products of complicated form made of electropositive metals and alloys on their basis. The purpose of the present work was the study of kinetics and mechanism of the process of copper dissolution in HNO<sub>3</sub> in wide concentration interval (4.0-14.8 M). Kinetics of interaction between copper and nitric acid has been investigated. The schema of the mechanism of this reaction has been offered. The schema of mutual transformations of products of nitric acid reduction in solution has been confirmed by the account of material balance on nitrogen.

  • Morphological control in desktop manufacturing by distributed attraction optimization methods

    Rapid prototyping techniques employing thermal material deposition are intended for direct fabrication of functional metal products and tooling. This article introduces an analytical model of such material transfer processes, using superposition of unit deposition distributions, composed of elementary ellipsoid primitives. The real-time surface geometry model, with its parameters identified by in-process profile measurements, is used for Smith- prediction of the material shape in the inaccessible deposition region. Thus, a distributed-parameter geometry control scheme is established to obtain a desired surface topology, by modulating the feed and motion of a moving mass source. This is based on dynamic geometry shaping by a real-time complex optimization technique, using distributed attraction of the mass source. The methodology is tested in geometric command following on a robotic fused wire deposition PAW station, using optical sensing by a scanning laser stripe.

  • Sheet metal design with the aid of Product Data Management (PDM) systems

    Product Data Management (PDM) systems were created in the early of 1980s. The development has increased rapidly in these, and also in different CAD-systems. However, there still occur problems in linking these two systems together and getting the full benefit out from the PDM system. Modern PDM systems, together with CAD softwares, do not take into account the different design aspects when designing, for example, sheet metal products. CAD softwares give automatically some parameters for sheet metals but these parameters may not be correct ones. In almost every PDM system there is a possibility for giving almost real-time feedback between the designers and manufacturers, but this feature is rarely used. Only few system users actually know what kind of help the PDM is offering and what kind of add-ons can be added into the system. The main problem seems to be that there is not just one way to design a sheet metal product and transform it to the PDM, even if all the users were using the same PDM system with the same given introduction.

  • The effect of performance based incentive plans [IC manufacturing]

    This report describes a method to simultaneously achieve and maintain production and quality goals through performance based incentive plans. Historically, at Texas Instruments' DMOS IV wafer fab, the focus on one metric resulted in a loss of another. Achievement or failure to achieve fab goals had no noticeable impact on production specialists. Throughout this time, incentive plans were tried, but their metrics were complicated and not easily recognized by direct labor because they were outside of their immediate line of sight. By modifying, improving, and evolving our incentive program to meet business goals, DMOS IV experienced seven record output quarters over 2 years while improving in all other industry established metrics.

  • Electronic Ballasts for HID Lamps

    This article presents a general analysis of several integrated topologies with high power factor in supplying metal halide (MH) lamps. The analyzed topologies that provide power-factor correction (PFC) are buck, boost, buck- boost, flyback, sepic, and zeta converters. The design methodology employed to calculate the circuit parameters and the simulation results are also presented.

  • A Brief History of Metal-Clad Switchgear [History]

    Metal-clad switchgear has been a workhorse of medium-voltage distribution systems, both industrial and utility, for nearly 80 years. While changes in this equipment have not been nearly as frequent as in some other types of equipment, such as variable-frequency electronic drives, during that period, there were many developments in the design and application of metal-clad switchgear. However, since it has a normal service life of 40 years or so, rapid change in equipment design is not demanded by the users.

  • A Network-Integrated Feature-Driven Engineering Environment: Information Modeling and Process Management

    Conventional data-centric integration approaches assume that the end-users are fully responsible for work-flow control, data consistency and integrity maintenance and inter-process coordination, generally without computer augmentation. The objective of this study is to develop a network-integrated engineering environment with an expanding set of system capabilities that can off-load engineers from some of these responsibilities and complexity, based on an integration approach which is both data- and process-centric. The envisioned system is configured on top of a generic CAX framework with a process management module encapsulated for assisting engineers to carry out a set of tightly-interrelated engineering activities in a product development cycle following a feature-driven process pattern. Sheet metal products using progressive dies were selected as the demonstration case to show two main aspects of the approach: information modeling and implementation of the process management module.

  • Configure and Parameters' Optimization for Sheet Metal Flexible Manufacturing System Based on Simulation

    Sheet metal machining is a special area in manufacturing industry. The flexible manufacturing system (FMS) has been used in the fabrication of sheet metal products in order to achieve high flexibility and high production efficiency. The configure and parameters are key factors for the performance optimization of the FMS. In this paper the discrete event system simulation is used to evaluate the configure and parameters, and to optimize the performance of the FMS. The composition and characteristics of sheet metal FMS are introduced briefly, the evaluation criteria for FMS' performance and the maximal service capability that the piler can provide to the machining cells are given out. Some simulation schemes are constructed to evaluate whether the configure and parameters are reasonable, and whether the piler has sufficient serviceability. Some instructive conclusions have been reached from the simulation: (1) The parameters of the piler have great effect on the FMS's performance. (2) As the production process of sheet metal are comparatively simple and fixed, the scheduling rules have minor influence on the FMS's performance. (3) On given parameters, a piler can provide sufficient service for four punch-shear machining cells.



Standards related to Metal products

Back to Top

No standards are currently tagged "Metal products"


Jobs related to Metal products

Back to Top