Conferences related to Mechanical systems

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


ICC 2021 - IEEE International Conference on Communications

IEEE ICC is one of the two flagship IEEE conferences in the field of communications; Montreal is to host this conference in 2021. Each annual IEEE ICC conference typically attracts approximately 1,500-2,000 attendees, and will present over 1,000 research works over its duration. As well as being an opportunity to share pioneering research ideas and developments, the conference is also an excellent networking and publicity event, giving the opportunity for businesses and clients to link together, and presenting the scope for companies to publicize themselves and their products among the leaders of communications industries from all over the world.


2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted papers will be peer reviewed. Accepted high quality papers will be presented in oral and postersessions, will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


More Conferences

Periodicals related to Mechanical systems

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Circuits and Systems, IEEE Transactions on

The Transactions on Biomedical Circuits and Systems addresses areas at the crossroads of Circuits and Systems and Life Sciences. The main emphasis is on microelectronic issues in a wide range of applications found in life sciences, physical sciences and engineering. The primary goal of the journal is to bridge the unique scientific and technical activities of the Circuits and Systems ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


More Periodicals

Most published Xplore authors for Mechanical systems

Back to Top

Xplore Articles related to Mechanical systems

Back to Top

Discussion on “conditions affecting stability in electric lighting circuits.” New York, January 8, 1909

Proceedings of the American Institute of Electrical Engineers, 1909

Chas. P. Steinmetz: The interesting phenomena of instability of electric circuits, discussed by Professor Thomson, have an importance far beyond the arc circuit: the arc circuit is the first and therefore the best known type of unstable circuit due to the work of Professor Thomson and other investigators; but instability occurs frequently also in other electrical and mechanical systems, and ...


Force and Torque

Power Magnetic Devices: A Multi-Objective Design Approach, None

In this chapter, an energy-based approach to the calculation of force and torque is set forth. Two variations of the approach are considered. In the first variation a macroscopic view of the device is taken. The second variation of the approach views the device microscopically. The chapter focuses on the evaluation of an expression for the energy in the coupling ...


A projector to design a passive-based feedback

Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), 2000

This paper deals with the decomposition of the drift term of nonlinear multivariable regular systems. A transverse and tangent decomposition of the vector field is first presented, then a feedback neutralizing the transverse part is studied. Zero dynamics stability is considered and sufficient conditions to obtain a global passivity of the system are given. Other decompositions based on the workless ...


A mechanical system condition-based maintenance demonstration model (naval shipboard machinery)

IEEE Conference on Systems Readiness Technology, 'Advancing Mission Accomplishment'., 1990

The increasing sophistication of naval shipboard machinery coupled with increasing competition for skilled manpower and tightening of defense budgets is forcing the Navy to consider alternative maintenance concepts. One such concept, condition-based maintenance (CBM), is described along with the reasons for its consideration. The concept of such a system integrated into the naval ship environment is described. A program at ...


Inversion of a Nonsingular Submatrix of an Incidence Matrix

IEEE Transactions on Circuit Theory, 1963

None


More Xplore Articles

Educational Resources on Mechanical systems

Back to Top

IEEE.tv Videos

Innovative Mechanical Systems to Address Current Robotics Challenges
EMBC 2011-Workshop- Biological Micro Electro Mechanical Systems (BioMEMS): Fundamentals and Applications-Utkan Demirci
EMBC 2011-Workshop- Biological Micro Electro Mechanical Systems (BioMEMS): Fundamentals and Applications-Ali Khademhosseini
EMBC 2011-Workshop- Biological Micro Electro Mechanical Systems (BioMEMS): Fundamentals and Applications-Mehmet R. Dokmeci
EMBC 2011-Workshop-Biological Micro Electro Mechanical Systems (BioMEMS): Fundamentals and Applications-Michelle Khine
Maker Faire 2008: Babbage's Difference Engine No. 2 Replica
Zhun Fan - Mechatronic Design Automation Using Evolutionary Approaches
Analog Devices SP4T RF MEMS Switch with Integrated Driver Circuitry for RF Instrumentation: MicroApps 2015 - Analog Devices
2013 IEEE & RSE Wolfson James Clerk Maxwell Award
The Design of Wearable Robots for Lower-Extremity Human Augmentation
A Conversation with…AJung Moon: IEEE TechEthics
Magmites: Wireless Resonant Magnetic Microrobots
Robotics History: Narratives and Networks Oral Histories: Danica Kragic
Kurt Petersen: 2019 IEEE Medal of Honor Recipient
Robotics History: Narratives and Networks Oral Histories:Mark Yim
How Much Autonomy Is Acceptable? - IEEE TechEthics Virtual Panel
APEC 2013 MicroMouse Competition
Robotics History: Narratives and Networks Oral Histories: Howie Choset
Part One: Interview with Grant Imahara—IEEE VIC Summit 2018
Sustainable Energy Explored At Solar Splash

IEEE-USA E-Books

  • Discussion on “conditions affecting stability in electric lighting circuits.” New York, January 8, 1909

    Chas. P. Steinmetz: The interesting phenomena of instability of electric circuits, discussed by Professor Thomson, have an importance far beyond the arc circuit: the arc circuit is the first and therefore the best known type of unstable circuit due to the work of Professor Thomson and other investigators; but instability occurs frequently also in other electrical and mechanical systems, and the study of the conditions leading to instability thus is one of the most important, subjects of electrical engineering. Thus we find synchronous and induction motors drop out of step, or find such motors starting from rest, but failing to run up to their proper speed; we meet with surging of synchronous apparatus, and find electrical apparatus misbehaving, apparently without reason, at the end of very long transmission lines. In all these phenomena, the same characteristic is the cause of instability, which has been investigated so ably by Professor Thomson in the early days of the arc circuit.

  • Force and Torque

    In this chapter, an energy-based approach to the calculation of force and torque is set forth. Two variations of the approach are considered. In the first variation a macroscopic view of the device is taken. The second variation of the approach views the device microscopically. The chapter focuses on the evaluation of an expression for the energy in the coupling field. Once an expression for field energy has been derived an expression for force is readily obtained. The chapter considers the more common case where flux linkage is expressed as a function of current and position. It also shows that the co-energy provides a useful vehicle in the calculation of force. The chapter also considers a microscopic device view in which the flux linkage equations need not be explicitly formulated. This approach facilitates the calculation of force or torque when using magnetic equivalent circuit analysis.

  • A projector to design a passive-based feedback

    This paper deals with the decomposition of the drift term of nonlinear multivariable regular systems. A transverse and tangent decomposition of the vector field is first presented, then a feedback neutralizing the transverse part is studied. Zero dynamics stability is considered and sufficient conditions to obtain a global passivity of the system are given. Other decompositions based on the workless field, attracting field, and rejecting field are also studied. Some illustrative examples are given.

  • A mechanical system condition-based maintenance demonstration model (naval shipboard machinery)

    The increasing sophistication of naval shipboard machinery coupled with increasing competition for skilled manpower and tightening of defense budgets is forcing the Navy to consider alternative maintenance concepts. One such concept, condition-based maintenance (CBM), is described along with the reasons for its consideration. The concept of such a system integrated into the naval ship environment is described. A program at the David Taylor Research Center (DTRC) is described with particular emphasis on a machinery diagnostic demonstration platform Worthington high-pressure air compressor installed in the laboratory provides a means of effectively demonstrating CBM on an actual shipboard auxiliary. Some near-term plans for the DTRC program are described, and areas for technology development are outlined.<<ETX>>

  • Inversion of a Nonsingular Submatrix of an Incidence Matrix

    None

  • Hand shape estimation using image transition network

    We present a method of hand posture estimation from silhouette images taken by two cameras. First, we extract the silhouette contour for a pair of images. We construct an eigenspace from images of hands with various postures. For effective matching, we define a shape complexity for each image to see how well the shape feature is represented. For a pair of input images, the total matching error is computed by combining the two matching errors according to the shape complexity. Thus the best-matched image is obtained for a pair of images. For rapid processing, we limit the matching candidate by using the constraint on the shape change. The possible shape transition is represented by a transition network. Because the network is hard to build, we apply offline learning, where nodes and links are automatically created by showing examples of hand shape sequences. We show experiments of building the transition networks and the performance of matching using the network.

  • Applications of continuum-based models of machine-tool spindle drives

    Continuous mechanical systems such as machine-tool spindle-drive shafts can be modeled using lumped or continuum models. In related work we developed a technique to obtain eigenvalues for a continuum-based model of a non-uniform spindle. We have extended this technique to obtain eigenfunctions, modal inertias, and modal stiffnesses for non-uniform spindles. We used this technique to obtain modal information and state equations that model the first three modes of a non-uniform spindle. The state equations were then used to obtain frequency response plots. The close agreement between the results from our technique and those obtained from a much higher order lumped model supports our technique. Furthermore, the ability of this technique to synthesize models that are accurate, low order and relatively simple to obtain suggests that it may be used to improve the design and control of spindles.

  • The parameterization of all stabilizing multi-period repetitive controllers for multiple-input/multiple-output plants with the specified input-output frequency characteristic

    In this paper, we examine the parameterization of all stabilizing multi-period repetitive controllers for multiple-input/multiple-output plants with the specified input-output frequency characteristic. The parameterization of all stabilizing multi-period repetitive controllers, those are used to improve the disturbance attenuation characteristics of the repetitive controller, for non- minimum phase systems was solved by Yamada et al. However, when we design a stabilizing multi-period repetitive controller using the parameterization by Yamada et al., the input-output frequency characteristic of the control system cannot be settled so easily, because 2(N +1) numbers of free parameters in the parameterization related to the input-output characteristic. This problem is solved by obtaining the parameterization of all stabilizing multi-period repetitive controllers with the specified input-output frequency characteristic, which is the parameterization when the input-output characteristic is settled beforehand. From this view point, the parameterization of all stabilizing multi-period repetitive controllers with the specified input-output frequency characteristic was proposed. However, the previous result did not clarify the parameterization of all stabilizing multi- period repetitive controllers for multiple-input/multiple-output plants with the specified input-output frequency characteristic. This work extends the previous results into the multiple-input/multiple-output plants.

  • Space Securing in Minimally Invasive Surgery -Examination of Operation System for Multi-DOF Manipulator

    This paper describes the development and experimental results of a master manipulator for the Workspace-creation manipulator for minimally invasive surgery. The master manipulator was developed for the purpose of maximizing the doctor's facility for performing operations. Therefore, the master manipulator needs to be easy to use for the doctor. This master manipulator which was developed has three degrees of freedom to control the Workspace- creation manipulator that has eleven degrees of freedom. And the authors studied new operation system with image of MRI.

  • Development of a CPLD Based Wireless Remote Control System of Pruning Machine for Plantation Forest

    A wireless remote control pruning machine was developed for plantation forest. The new designed system mainly consists of two parts: a transmitting system in the form of a hand controller and a receiving system mounted on the frame of the machine to drive the mechanical system. The idea of using the complex programmable logic device (CPLD) to realize the digital signal processing for the control system was discussed in details. The structure of the electromechanical interface, the transmitting system and the receiving system were all presented in this paper. The point of technology for each part was analyzed. The whole remote control system has the advantages of simplicity, reliability of performance and function of anti-interference. It has been successfully used in the manufactured automatic pruning machine and the expected result is obtained.



Standards related to Mechanical systems

Back to Top

IEEE Standard Requirements for Instrument Transformers

This standard is intended for use as a basis for performance and interchangeability of equipment covered, and to assist in the proper selection of such equipment. Safety precautions are also addressed. This standard covers certain electrical, dimensional, and mechanical characteristics, and takes into consideration certain safety features of current and inductively coupled voltage transformers of types generally used in the ...



Jobs related to Mechanical systems

Back to Top