Conferences related to Measurement units

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.


More Conferences

Periodicals related to Measurement units

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Circuits and Systems, IEEE Transactions on

The Transactions on Biomedical Circuits and Systems addresses areas at the crossroads of Circuits and Systems and Life Sciences. The main emphasis is on microelectronic issues in a wide range of applications found in life sciences, physical sciences and engineering. The primary goal of the journal is to bridge the unique scientific and technical activities of the Circuits and Systems ...


More Periodicals

Most published Xplore authors for Measurement units

Back to Top

Xplore Articles related to Measurement units

Back to Top

Low cost test solution for IDDQ

Digest of Papers 1996 IEEE International Workshop on IDDQ Testing, 1996

This paper describes a medium-speed, reliable and cost effective method of doing IDDQ testing. This method utilizes standard resources available on typical automatic test equipment (ATE) systems which do not have specialized IDDQ measurement hardware. This is a practical solution that can be implemented at a low cost and minimal resources.


Testing and validation of power system dynamic state estimators using real time digital simulator (RTDS)

2017 IEEE Power & Energy Society General Meeting, 2017

This paper presents an approach to test and validate a number of power system dynamic state estimation (PSDSE) algorithms, utilizing Real Time Digital Simulator (RTDS), a real-time simulation tool. WSCC 9-bus and IEEE 30-bus systems have been utilized to demonstrate the proposed approach. The test systems are developed on the RSCAD software of the RTDS. The conventional remote terminal unit ...


IEEE Approved Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMU) for Power System Protection and Control

IEEE PC37.242/D11, October 2012, 2013

The document provides guidance for synchronization, calibration, testing, and installation of Phasor Measurement Units (PMU) applied in power system. The following are addressed in this guide: (a) Considerations for the installation of PMU devices based on application requirements and typical substation electrical bus configurations. (b) Techniques focusing on the overall accuracy and availability of the time synchronization system. (c) Test ...


High productivity multiple DUT CV test for MEMS microphone wafer with automatic correction

2010 International Symposium on Semiconductor Manufacturing (ISSM), 2010

Productivity in MEMS wafer process is getting more and more important as mass production on 200 mm wafer is increasing. Multiple DUT parallel CV test is a high productive way for MEMS Microphone wafer test process, however, in case of the one of two electrodes is connected to the wafer substrate with some contact resistance, interference among DUTs has an ...


On measurement unit placement for smart electrical grid fault localization

2013 IEEE International Conference on Smart Grid Communications (SmartGridComm), 2013

The use of conventional power flow measurements along with the phasor measurements from newly developed PMUs help us to achieve a cost effective solution for fault localization in power transmission network. However, the development of a methodology for the joint optimal placement of PMUs and power flow units in a transmission network is challenging. To this aim, we have proposed ...


More Xplore Articles

Educational Resources on Measurement units

Back to Top

IEEE-USA E-Books

  • Low cost test solution for IDDQ

    This paper describes a medium-speed, reliable and cost effective method of doing IDDQ testing. This method utilizes standard resources available on typical automatic test equipment (ATE) systems which do not have specialized IDDQ measurement hardware. This is a practical solution that can be implemented at a low cost and minimal resources.

  • Testing and validation of power system dynamic state estimators using real time digital simulator (RTDS)

    This paper presents an approach to test and validate a number of power system dynamic state estimation (PSDSE) algorithms, utilizing Real Time Digital Simulator (RTDS), a real-time simulation tool. WSCC 9-bus and IEEE 30-bus systems have been utilized to demonstrate the proposed approach. The test systems are developed on the RSCAD software of the RTDS. The conventional remote terminal unit (RTU) measurements and the phasor measurement unit (PMU) measurements are sent from the RTDS runtime environment to the MATLAB based PSDSE application at regular intervals for the estimation of the states, using software-in-the-loop (SIL) configuration. The PSDSE is solved by utilizing the extended Kalman filter (EKF), the unscented Kalman filter (UKF), and the cubature Kalman filter (CKF) approaches, and their relative performances are studied with the help of the simulation results on the two test systems.

  • IEEE Approved Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMU) for Power System Protection and Control

    The document provides guidance for synchronization, calibration, testing, and installation of Phasor Measurement Units (PMU) applied in power system. The following are addressed in this guide: (a) Considerations for the installation of PMU devices based on application requirements and typical substation electrical bus configurations. (b) Techniques focusing on the overall accuracy and availability of the time synchronization system. (c) Test and calibration procedures for laboratory and field applications. (d) Communications testing for connecting PMUs to other devices including Phasor Data Concentrators (PDC).

  • High productivity multiple DUT CV test for MEMS microphone wafer with automatic correction

    Productivity in MEMS wafer process is getting more and more important as mass production on 200 mm wafer is increasing. Multiple DUT parallel CV test is a high productive way for MEMS Microphone wafer test process, however, in case of the one of two electrodes is connected to the wafer substrate with some contact resistance, interference among DUTs has an effect on the measurement circuit of tester and makes measurement value inaccurate. This paper describes measurement problems in multiple DUT parallel CV test for such wafer, and proposes a practical method correcting a measurement capacitance automatically to solve the problem.

  • On measurement unit placement for smart electrical grid fault localization

    The use of conventional power flow measurements along with the phasor measurements from newly developed PMUs help us to achieve a cost effective solution for fault localization in power transmission network. However, the development of a methodology for the joint optimal placement of PMUs and power flow units in a transmission network is challenging. To this aim, we have proposed an optimization problem which can be solved using integer linear programming (ILP) implementation. We found that under mild assumptions we can develop a linear mathematical equation for fault localization by using the data from measurement units. The performance is evaluated by applying it for fault detection in IEEE bus systems.

  • Disruptive event classification using PMU data in distribution networks

    Proliferation of advanced metering devices with high sampling rates in distribution grids, e.g., micro-phasor measurement units (μPMU), provides unprecedented potentials for wide-area monitoring and diagnostic applications, e.g., situational awareness, health monitoring of distribution assets. Unexpected disruptive events interrupting the normal operation of assets in distribution grids can eventually lead to permanent failure with expensive replacement cost over time. Therefore, disruptive event classification provides useful information for preventive maintenance of the assets in distribution networks. Preventive maintenance provides wide range of benefits in terms of time, avoiding unexpected outages, maintenance crew utilization, and equipment replacement cost. In this paper, a PMU-data-driven framework is proposed for classification of disruptive events in distribution networks. The two disruptive events, i.e., malfunctioned capacitor bank switching and malfunctioned regulator on-load tap changer (OLTC) switching are considered and distinguished from the normal abrupt load change in distribution grids. The performance of the proposed framework is verified using the simulation of the events in the IEEE 13-bus distribution network. The event classification is formulated using two different algorithms as; i) principle component analysis (PCA) together with multi-class support vector machine (SVM), and ii) autoencoder along with softmax classifier. The results demonstrate the effectiveness of the proposed algorithms and satisfactory classification accuracies.

  • Micro Synchrophasor-Based Intrusion Detection in Automated Distribution Systems: Toward Critical Infrastructure Security

    Because electric power distribution systems are undergoing many technological changes, concerns are emerging about additional vulnerabilities that might arise. Resilient cyber-physical systems (CPSs) must leverage state measures and operational models that interlink their physical and cyber assets, to assess their global state. Here, the authors describe a viable process of abstraction to obtain this holistic state exploration tool by analyzing data from micro-phasor measurement units (μPMUs) and monitoring distribution supervisory control and data acquisition (DSCADA) traffic. To interpret the data, they use semantics that express the specific physical and operational constraints of the system in both cyber and physical realms.

  • A general test scheme for electrical measurement and control unit and its application

    To improve the generality and flexibility of test scheme, a general digital and analog mixed test scheme, which is based on a computerized model and signal generator has been designed in this paper, the test scheme applies simulation software to produce any kind of digital test signal, which is then transferred to analog signal by signal generator to meet input requirements of the device under test. The measurement value of device under test can be compared with original input value to analyze the measurement precision under all conditions. A test example for PMU Light is given to describe the test process, and the test result shows that the test scheme proposed in this paper can produce any kinds of test signals, it is a general and flexible test means for electrical measurement and control unit with high accuracy.

  • An Islanding Algorithm to Restore a PMU Installed Power System

    This paper is concerned about islanding of network and observability of these islands in power system restoration. It is assumed that a black out happened on a system which have minimum PMUs (phasor measurement units) for measuring network's parameters. To restore this system an algorithm of islanding that keeps all islands observable to make the restoration process shorter is introduced and developed step by step on the IEEE 14 bus system and it is applied to the New England 39 bus system to show the result for a bigger system.

  • Appendix A: Units, Physical Constants, and Conversion Factors

    This appendix contains sections titled: * International System of Units * Physical Constants * Conversion Factors ]]>



Standards related to Measurement units

Back to Top

(Replaced) IEEE Standard VHDL Language Reference Manual

his standard revises and enhances the VHDL language reference manual (LRM) by including a standard C language interface specification; specifications from previously separate, but related, standards IEEE Std 1164 -1993,1 IEEE Std 1076.2 -1996, and IEEE Std 1076.3-1997; and general language enhancements in the areas of design and verification of electronic systems.


IEEE Application Guide for Distributed Digital Control and Monitoring for Power Plants


IEEE Guide for Control of Small Hydroelectric Power Plants


IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations


IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination Document


More Standards

Jobs related to Measurement units

Back to Top