Conferences related to Measurement by laser beam

Back to Top

2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


2020 IEEE International Conference on Systems, Man, and Cybernetics (SMC)

The 2020 IEEE International Conference on Systems, Man, and Cybernetics (SMC 2020) will be held in Metro Toronto Convention Centre (MTCC), Toronto, Ontario, Canada. SMC 2020 is the flagship conference of the IEEE Systems, Man, and Cybernetics Society. It provides an international forum for researchers and practitioners to report most recent innovations and developments, summarize state-of-the-art, and exchange ideas and advances in all aspects of systems science and engineering, human machine systems, and cybernetics. Advances in these fields have increasing importance in the creation of intelligent environments involving technologies interacting with humans to provide an enriching experience and thereby improve quality of life. Papers related to the conference theme are solicited, including theories, methodologies, and emerging applications. Contributions to theory and practice, including but not limited to the following technical areas, are invited.


2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.


More Conferences

Periodicals related to Measurement by laser beam

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Components and Packaging Technologies, IEEE Transactions on

Component parts, hybrid microelectronics, materials, packaging techniques, and manufacturing technology.


More Periodicals

Most published Xplore authors for Measurement by laser beam

Back to Top

Xplore Articles related to Measurement by laser beam

Back to Top

Electron beam spectrum diagnostics with optical transition radiation on the beijing free-electron laser

Tsinghua Science and Technology, 2004

A measurement system was developed to measure the electron beam spectrum of the Beijing free-electron laser based on the optical transition radiation (OTR). This paper describes the system, which consists of a 32-channel high resolution of 0.02% OTR detector, especially the spectrometer. The OTR angular-distribution pattern at the focal plane has two apexes, but the two apexes are smoothed out ...


Non‐GNSS Positioning Systems and Techniques for Outdoors

Global Positioning: Technologies and Performance, None

This chapter contains sections titled:Introduction (Large Area Without Contact or Wireless Systems)The Optical SystemsThe Terrestrial Radio SystemsThe Satellite Radio SystemsNon‐Radio‐Based SystemsExercisesBibliography


Testing of Composite Materials Using Advanced NDT Methods

VXV International Symposium on Theoretical Engineering, 2009

Today modern industry make very extensive use of various composite materials. Because of complexity of such structures, abilities of commonly used NDT methods sometimes are not sufficient. More advanced techniques should be utilized. In this paper both T-Ray (terahertz radiation) and low energy DR (Digital Radiography) methods are compared for the purposes of various composite materials evaluation. Different types of ...


Human retina model for laser safety during corneal surgery with a femtosecond laser

2016 International Conference Laser Optics (LO), 2016

In the present study a numerical simulation was developed to quantify the temperature rise in the retina during femtosecond corneal surgery. Additionally, ex-vivo retinal heating due to femtosecond laser irradiation was measured with an infrared thermal camera as a validation of the simulation. Thermal camera measurements are in agreement with the simulation. During routine femtosecond corneal surgery with normal clinical ...


Analysis of the Accuracy of Industrial Robots and Laser Scanners for Remote Laser BeamWelding and Cutting

ISR 2010 (41st International Symposium on Robotics) and ROBOTIK 2010 (6th German Conference on Robotics), 2010

Remote laser beam welding and cutting have a promising future within the manufacturing technology domain. The advantages of both technologies, that are required in industry, are e. g. a high working speed and a high quality of the welding seams and cutting edges at various contours. To achieve these advantages, challenges for a guidance of the laser beam have to ...


More Xplore Articles

Educational Resources on Measurement by laser beam

Back to Top

IEEE.tv Videos

Brooklyn 5G Summit 2014: Channel Measurements Summary by Ted Rappaport
IMS 2014: Wideband mmWave Channels: Implications for Design and Implementation of Adaptive Beam Antennas
Laser Communication From Space Using Superconducting Detectors - ASC-2014 Plenary series - 12 of 13 - Friday 2014/8/15
IMS 2011 Microapps - Waveguide Characteristics and Measurement Errors
Testing My New Robot Body
Ursula Keller - IEEE Edison Medal, 2019 IEEE Honors Ceremony
Larson Collection interview with Arthur L. Schawlow
APEC 2012 - Thomas S. Buzak Plenary
5G Wireless A Measurement and Metrology Perspective: MicroApps 2015 - Keysight Technologies
DROP: The Durable Reconnaissance and Observation Platform
MicroApps: Recent Improvement on Y-Factor Noise Figure Measurement Uncertainty (Agilent Technologies)
MicroApps: Measurement Advances for Differential and I/Q Devices (Agilent Technologies)
Brooklyn 5G Summit 2014: Channel Measurement and Modeling with Dr. Andy Nix and Dr. Mark Beach
National Strategic Computing Initiative - Carl Williams: 2016 International Conference on Rebooting Computing
IMS 2011 Microapps - A Comparison of Noise Parameter Measurement Techniques
A 60GHz Packaged Switched Beam 32nm CMOS TRX with Broad Spatial Coverage, 17.1dBm Peak EIRP, 6.1dB NF at <250mW: RFIC Industry Showcase
On the Characterization of Thermal Coupling Resistance in a Current Mirror: RFIC Industry Showcase 2016
Testing 5G: OTA and the Connectorless World - IMS 2017
IMS 2011 Microapps - Ultra Low Phase Noise Measurement Technique Using Innovative Optical Delay Lines
CASS Lecture by Dr. Chris Hull, "Millimeter-Wave Power Amplifiers in FinFET Technology"

IEEE-USA E-Books

  • Electron beam spectrum diagnostics with optical transition radiation on the beijing free-electron laser

    A measurement system was developed to measure the electron beam spectrum of the Beijing free-electron laser based on the optical transition radiation (OTR). This paper describes the system, which consists of a 32-channel high resolution of 0.02% OTR detector, especially the spectrometer. The OTR angular-distribution pattern at the focal plane has two apexes, but the two apexes are smoothed out due to the electron beam energy distribution. The energy spectrum can be measured if the magnet energy resolution is higher than 0.7% to distinguish the electron beam energy distribution.

  • Non‐GNSS Positioning Systems and Techniques for Outdoors

    This chapter contains sections titled:Introduction (Large Area Without Contact or Wireless Systems)The Optical SystemsThe Terrestrial Radio SystemsThe Satellite Radio SystemsNon‐Radio‐Based SystemsExercisesBibliography

  • Testing of Composite Materials Using Advanced NDT Methods

    Today modern industry make very extensive use of various composite materials. Because of complexity of such structures, abilities of commonly used NDT methods sometimes are not sufficient. More advanced techniques should be utilized. In this paper both T-Ray (terahertz radiation) and low energy DR (Digital Radiography) methods are compared for the purposes of various composite materials evaluation. Different types of tested materials (glass fiber and carbon fiber composite structures) and defects such as delaminations will be analysed.

  • Human retina model for laser safety during corneal surgery with a femtosecond laser

    In the present study a numerical simulation was developed to quantify the temperature rise in the retina during femtosecond corneal surgery. Additionally, ex-vivo retinal heating due to femtosecond laser irradiation was measured with an infrared thermal camera as a validation of the simulation. Thermal camera measurements are in agreement with the simulation. During routine femtosecond corneal surgery with normal clinical parameters, the procedure is safe.

  • Analysis of the Accuracy of Industrial Robots and Laser Scanners for Remote Laser BeamWelding and Cutting

    Remote laser beam welding and cutting have a promising future within the manufacturing technology domain. The advantages of both technologies, that are required in industry, are e. g. a high working speed and a high quality of the welding seams and cutting edges at various contours. To achieve these advantages, challenges for a guidance of the laser beam have to be overcome. The working distance of about 400 mm at remote laser beam cutting and up to 2,000 mm at remote laser beam welding requires an accurate motion of the involved laser beam handling devices, as tiny displacements of the optics result in severe misalignments of the laser beam on the work piece. In this case an industrial robot is combined with a laser beam deflecting scanner to realise the remote processes. This system setup has to guide the focus of the laser beam, which is less than 100 micrometer in diameter, multiple times over the same cutting edges for remote laser beam cutting. This paper shows the requirements concerning the accuracy of the devices used for remote laser beam welding and cutting. Based on these requirements, methods are shown how the precision of the devices can be measured for these processes. The results of these measurements show that remote laser beam welding and cutting can be applied with standard industrial robots.

  • Laser-Based Full Cut Dicing Evaluations for Thin Si Wafers

    Over the last years, singulation of thin semiconductor wafers with (ultra) low-K top layer has become a challenge in the production process of integrated circuits. The traditional blade dicing process is encountering serious yield issues. These issues can be addressed by applying a laser grooving process prior to the blade dicing, which is the process of reference nowadays. However, as wafers are becoming thinner, this process flow is not providing the yield and cost required. This paper will discuss the results of a study done on several multi beam laser ablation technologies on thin Si wafers and describe the pro's and con's for each of them.

  • CVD-diamond external cavity Raman laser operating at 1632 nm

    CVD diamond Raman laser with external cavity operating at 1632 nm is demonstrated for the first time. Output energy of 25 μJ in the 6 ns long pulse with the fundamental spatial profile was obtained.

  • Effect of Laser Cut on the Performance of Permanent Magnet Assisted Synchronous Reluctance Machines

    This paper investigates the effect of laser cutting the stator lamination on the performance of a permanent magnet assisted synchronous reluctance machine (PMA SynRM). A technique for the modeling of the B-H curves of electrical steel laminations is described. It considers the extent of degradation of the magnetic properties caused by laser cutting, reported in the literature, and assumes that the degree of damage is determined by the distance between the cut edges or the width of the strip. The technique is employed to predict the performance of the PMA SynRM, which exhibited significant discrepancies between measured and predicted performance assuming the ideal manufacturer's B-H curve. In the analysis, the machine is subdivided into regions characterized by the distance between the edges, and each region is assigned a corresponding B-H curve. Through comparisons between experimental measurements and predictions, this paper highlights the potential impact of laser cutting on the performance of electrical machines, especially those exhibiting a large cutting length per steel area. Therefore, it demonstrates the necessity of incorporating such effects into the modeling in order to improve the prediction accuracy.

  • Integrated optofluidic flow sensor using the self-mixing effect

    A novel integrated optofluidic flow sensing platform based on the self-mixing effect is presented. The system measures flow of a blood phantom through a 250 μm channel and exhibits good linearity, repeatability and accuracy.

  • Stealth dicing with ultrafast Bessel beams with engineered transverse profiles

    We investigate high-speed glass cleaving with ultrafast laser beams with engineered transverse intensity profile. We achieve accuracy of ~ 1 μm at 25 mm/s and drastically enhance cleavability compared to standard Bessel beams.



Standards related to Measurement by laser beam

Back to Top

No standards are currently tagged "Measurement by laser beam"


Jobs related to Measurement by laser beam

Back to Top