Conferences related to Matrix converters

Back to Top

2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


More Conferences

Periodicals related to Matrix converters

Back to Top

Advanced Packaging, IEEE Transactions on

The IEEE Transactions on Advanced Packaging has its focus on the modeling, design, and analysis of advanced electronic, photonic, sensors, and MEMS packaging.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


More Periodicals


Xplore Articles related to Matrix converters

Back to Top

DTFC Based Indirect Matrix Converter Using Active Flux Concept for IPMSM Drive

2011 46th International Universities' Power Engineering Conference (UPEC), 2011

An improved direct torque and flux control (DTFC) scheme based on active flux concept for interior permanent magnet synchronous motor (IPMSM) using indirect matrix converter (IMC) is presented in this paper. Active flux concept changes rotor with magnetic poles saliency to nonsalient ones. Rotor position and speed estimation are simplified significantly, because rotor position and active flux position are identical. ...


A single-chip 8-bit A/D converter

1976 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1976

A monolithic 8-bit A/D converter fabricated with P-channel metal-gate process will be covered, citing such features as no missing codes and ability to complete a conversion in 40 μs.


Security

Digital Data Integrity: The Evolution from Passive Protection to Active Management, None

This chapter contains sections titled:IntroductionEncryption and Data ProtectionData Protection Application SecuritySecurity Vulnerabilities in Data Protection ApplicationsConclusion


A Versatile Digital Encoder For Video Signals

IEEE 1992 International Conference on Consumer Electronics Digest of Technical Papers, 1992

None


The Directional Wireless Channel

Modelling the Wireless Propagation Channel: A simulation approach with Matlab, None

This chapter contains sections titled:IntroductionMIMO SystemsProjectsSummaryReferencesSoftware Supplied


More Xplore Articles

Educational Resources on Matrix converters

Back to Top

IEEE-USA E-Books

  • DTFC Based Indirect Matrix Converter Using Active Flux Concept for IPMSM Drive

    An improved direct torque and flux control (DTFC) scheme based on active flux concept for interior permanent magnet synchronous motor (IPMSM) using indirect matrix converter (IMC) is presented in this paper. Active flux concept changes rotor with magnetic poles saliency to nonsalient ones. Rotor position and speed estimation are simplified significantly, because rotor position and active flux position are identical. Torque and flux are controlled independently using PI controllers and four-step switching is used in rectifier bridge of IMC to reduce torque ripple associated with DTC. Removing bulky capacitor of DC link in IMC results in reduced volume and size of converter. Combination of benefits of IMC and DTFC can be achieved using this scheme. Low torque and flux ripples, constant switching frequency, unity power factor regardless of load power factor, wide speed range and low THD are features of proposed scheme.

  • A single-chip 8-bit A/D converter

    A monolithic 8-bit A/D converter fabricated with P-channel metal-gate process will be covered, citing such features as no missing codes and ability to complete a conversion in 40 μs.

  • Security

    This chapter contains sections titled:IntroductionEncryption and Data ProtectionData Protection Application SecuritySecurity Vulnerabilities in Data Protection ApplicationsConclusion

  • A Versatile Digital Encoder For Video Signals

    None

  • The Directional Wireless Channel

    This chapter contains sections titled:IntroductionMIMO SystemsProjectsSummaryReferencesSoftware Supplied

  • Down Converter Characterization in a Synthetic Instrument Context

    This paper provides an overview of the need for a common set of specification parameters to characterize a down converter in a synthetic instrument (SI). It then identifies and briefly discusses a core set of specification parameters that the DOD Synthetic Instrumentation Frequency Translation Device Working Group (SI FTD WG) has identified as "best specification practices" for both characterizing and specifying a down converter. The paper then provides an in- depth technical discussion of two of the less understood down converter related intermediate frequency (IF) output parameters: group delay and phase linearity.

  • Reconfigurable A/D - D/A converter and its use in pipelined A/D converters

    The paper describes a simplified version of a pipelined A/D converter using propagation type A/D converters. It is further shown that using the main theorem results, a reconfigurable A/D converter, which may perform either as an A/D converter or as a D/A converter, can be obtained.

  • Traction drive with medium-frequency transformer - Smoothing trolley current by inserting zero vectors

    This paper presents research motivated by industrial demand for special novel high voltage traction drive topology devoted to minimization of traction transformer weight against classical locomotives operates on both 25kV/50Hz and 15kV/16<sup>2</sup>/<sub>3</sub>Hz trolley voltages. This paper deals with testing of whole traction converter prototype in configuration: two single phase matrix converter + medium frequency transformer + single phase voltage- source active rectifier in selected transient states and verifying of proper function of control algorithms. The new control of traction converter based on inserting zero vectors has been proposed to smooth taken trolley current.

  • Implementing algorithms for convolution on arrays of adders

    The authors consider the problem of developing VLSI signal processors for computing convolutions. Convolutions can be efficiently computed by VLSI processors that consist of arrays of adders when they are stated in terms of matrices with elements consisting of only 1, 0, or -1. Unfortunately, when stated in matrix form the published algorithms have matrices with elements other than 1, 0, or -1. The authors explore why this occurs and show how it can be prevented when an algorithm is developed. If this fails, they propose a technique for addressing this problem that consists of replacing each such matrix by the product of two or more matrices whose elements are 1, 0, or -1.<<ETX>>

  • SC parasitic structure conversion with CAD

    The ability to convert a parasitic structure into a non-parasitic one is of great value in order to achieve systematic design in automatic circuit manufacturing. In this paper, a simple derivation of the biphase switched- capacitor admittance matrix is presented, then an accompanying three- dimensional matrix is provided to help fulfil symbolic operations. In addition, a package to transform a parasitic-sensitive structure to an insensitive one is introduced.<>



Standards related to Matrix converters

Back to Top

No standards are currently tagged "Matrix converters"


Jobs related to Matrix converters

Back to Top