Conferences related to Manufactured products

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 57th ACM/ESDA/IEEE Design Automation Conference (DAC)

The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2022 59th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2021 58th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2019 56th ACM/ESDA/IEEE Design Automation Conference (DAC)

    EDA (Electronics Design Automation) is becoming ever more important with the continuous scaling of semiconductor devices and the growing complexities of their use in circuits and systems. Demands for lower-power, higher-reliability and more agile electronic systems raise new challenges to both design and design automation of such systems. For the past five decades, the primary focus of research track at DAC has been to showcase leading-edge research and practice in tools and methodologies for the design of circuits and systems.

  • 2018 55th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2017 54th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2016 53nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2015 52nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2014 51st ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC Description for TMRF The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading

  • 2013 50th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 session on design methodologies and EDA tool developments, keynotes, panels, plus User Track presentations. A diverse worldwide community representing more than 1,000 organization attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2012 49th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers

  • 2011 48th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference is the world s leading technical conference and tradeshow on electronic design and design automation. DAC is where the IC Design and EDA ecosystem learns, networks, and does business.

  • 2010 47th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers.

  • 2009 46th ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC is the premier event for the electronic design community. DAC offers the industry s most prestigious technical conference in combination with the biggest exhibition, bringing together design, design automation and manufacturing market influencers.

  • 2008 45th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 250 of the leading electronics design suppliers.

  • 2007 44th ACM/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments and an Exhibition and Demo Suite area with over 250 of the leading EDA, silicon and IP Providers.

  • 2006 43rd ACM/IEEE Design Automation Conference (DAC)

  • 2005 42nd ACM/IEEE Design Automation Conference (DAC)

  • 2004 41st ACM/IEEE Design Automation Conference (DAC)

  • 2003 40th ACM/IEEE Design Automation Conference (DAC)

  • 2002 39th ACM/IEEE Design Automation Conference (DAC)

  • 2001 38th ACM/IEEE Design Automation Conference (DAC)

  • 2000 37th ACM/IEEE Design Automation Conference (DAC)

  • 1999 36th ACM/IEEE Design Automation Conference (DAC)

  • 1998 35th ACM/IEEE Design Automation Conference (DAC)

  • 1997 34th ACM/IEEE Design Automation Conference (DAC)

  • 1996 33rd ACM/IEEE Design Automation Conference (DAC)


2020 IEEE 18th International Conference on Industrial Informatics (INDIN)

INDIN focuses on recent developments, deployments, technology trends, and research results in Industrial Informatics-related fields from both industry and academia


2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)

All topics related to engineering and technology management, including applicable analytical methods and economical/social/human issues to be considered in making engineering decisions.


2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.


More Conferences

Periodicals related to Manufactured products

Back to Top

Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Automation Science and Engineering, IEEE Transactions on

The IEEE Transactions on Automation Sciences and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. We welcome results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, ...


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


Communications, IEEE Transactions on

Telephone, telegraphy, facsimile, and point-to-point television, by electromagnetic propagation, including radio; wire; aerial, underground, coaxial, and submarine cables; waveguides, communication satellites, and lasers; in marine, aeronautical, space and fixed station services; repeaters, radio relaying, signal storage, and regeneration; telecommunication error detection and correction; multiplexing and carrier techniques; communication switching systems; data communications; and communication theory. In addition to the above, ...


More Periodicals

Most published Xplore authors for Manufactured products

Back to Top

Xplore Articles related to Manufactured products

Back to Top

Fighting Against Counterfeit Drugs with Sproxil

Fighting Against Counterfeit Drugs with Sproxil, 11/01/2011

This webinar explains the issue of counterfeit drugs in emerging markets and about how Sproxil empowers consumers in the fight against fake drugs. Sproxil provides software and systems that capture market intelligence in emerging markets using cell phones. Our service provides automatic protection against counterfeiters. Brand and product pirates in emerging markets pose a significant risk to legitimate manufacturers, leading ...


The application of structured engineering design methodologies to engineering curriculum development

32nd Annual Frontiers in Education, 2002

This work in progress presentation illustrates the use of standard, structured engineering design tools for the development and improvement of an engineering curriculum. These methodologies are traditionally applied to the design of engineering systems, and make use of structured tools such as "House of Quality". The design and improvements of complex organizational systems, such as curricula, can benefit from the ...


Integration of decisional and physical systems in the design of manufacturing systems

1986 25th IEEE Conference on Decision and Control, 1986

The design of Computer Integrated Manufacturing Systems is becoming more and more complex. This complexity is the result of the high degree of automation of such systems and the need for integrating various components (technical, economic, social and human) and various functions. Considering the life cycle of a manufacturing system, we can bring out several steps : analysis/ design, development, ...


Recent Testing Experience in a Large Motor Test Facility

IEEE Transactions on Industry Applications, 1983

New test facilities and testing capabilities are becoming increasingly important to verify the compliance of manufactured product to user needs. A discussion of the need for testing as well as the types and implications of various test methods is presented. A new facility is described and its ability to meet today's performance testing requirements is examined.


The Design of a Repulsion Magnetic Bearing for Watt-Hour Meters

Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems, 1961

This paper describes the design of a high-precision, stable, low-cost magnetic bearing for watt-hour (w-hr) meters using small barium ferrite permanent magnets.


More Xplore Articles

Educational Resources on Manufactured products

Back to Top

IEEE-USA E-Books

  • Fighting Against Counterfeit Drugs with Sproxil

    This webinar explains the issue of counterfeit drugs in emerging markets and about how Sproxil empowers consumers in the fight against fake drugs. Sproxil provides software and systems that capture market intelligence in emerging markets using cell phones. Our service provides automatic protection against counterfeiters. Brand and product pirates in emerging markets pose a significant risk to legitimate manufacturers, leading to brand degradation, decrease in sales, consumer purchasing apprehension and exposure to lawsuits. Sproxil has designed technology specifically for emerging markets. Using any cell phone, your customers can text message an item-unique code and get an instant response confirming your brand's genuineness. You can then send highly relevant targeted offers to your consumers right at the point of sale.

  • The application of structured engineering design methodologies to engineering curriculum development

    This work in progress presentation illustrates the use of standard, structured engineering design tools for the development and improvement of an engineering curriculum. These methodologies are traditionally applied to the design of engineering systems, and make use of structured tools such as "House of Quality". The design and improvements of complex organizational systems, such as curricula, can benefit from the use of the structured methodologies in the same way as complex manufactured products. Because educators are being tasked to integrate greater use of the tools in their classroom activities, it is reasonable to take advantage of the benefits from these methodologies in other educational activities. The motivation for major curriculum development and/or redesign is presented along with challenges facing curriculum reviews. An example of a first iteration of the curriculum development process is presented along with some conclusions drawn from this application of the tools.

  • Integration of decisional and physical systems in the design of manufacturing systems

    The design of Computer Integrated Manufacturing Systems is becoming more and more complex. This complexity is the result of the high degree of automation of such systems and the need for integrating various components (technical, economic, social and human) and various functions. Considering the life cycle of a manufacturing system, we can bring out several steps : analysis/ design, development, implementation, operating. The experience shows the importance of the analysis/ design phase on the cost of following task if we can use a method.

  • Recent Testing Experience in a Large Motor Test Facility

    New test facilities and testing capabilities are becoming increasingly important to verify the compliance of manufactured product to user needs. A discussion of the need for testing as well as the types and implications of various test methods is presented. A new facility is described and its ability to meet today's performance testing requirements is examined.

  • The Design of a Repulsion Magnetic Bearing for Watt-Hour Meters

    This paper describes the design of a high-precision, stable, low-cost magnetic bearing for watt-hour (w-hr) meters using small barium ferrite permanent magnets.

  • Using triangular fuzzy numbers in the tests of control charts for unnatural patterns

    The control chart in essence is a set of statistical limits applied to a sequence of points representing a process under study. The data comprising each individual point are random, but the points themselves are plotted in some deliberately chosen non-random arrangement selected to represent the most important variable. The control chart tests the arbitrary or non-random arrangements of points to determine whether they behave as if they were random. If the plotted points indicate nothing but randomness, this tends to show that the variable which formed the base of the arrangement is not a significant variable. On the other hand, if the points indicate that non- randomness has entered the data, this tends to show that the variable on which the arrangement was based is actually a significant variable. The control chart tells when to look for trouble but it cannot, by itself, tell where to look or what cause will be found. The most important inadequacy of control charts is the case where all the points characterizing the process fall inside the limits even though the process is out of control. In such a case, one has an unnatural pattern. Some tests for unnatural patterns are given in most quality control books. These tests are applied by using a control charts of 60 divided into six equal zones. The authors propose an alternative method in this paper. Instead of using six equal zones of 1/spl sigma/ each, the authors use the corresponding degrees of membership of these zones.

  • Assessing Sustainability in Manufacturing Using a Fuzzy Expert System

    One of the recent business challenges is evaluating performance measurement on product returns and recovery operations. Recovery strategy is important in minimising landfill waste. However, there is a lack of measureable criteria to examine the performance attributes of cost, time, waste and quality for a manufactured product with recovery operations in a supply chain. This paper proposes the development of a fuzzy expert system for performance measurement on product returns and recovery operations, which is one of the key supply chain management processes in achieving sustainability in manufacturing. Finally, contributions of this research study are provided.

  • Software architecture of human-like robot

    Software architectures have been suggested for a non-industrial robot up to the present, however a few developer who working in the robot field are applying those to manufactured products. Such software architecture of the robot is not using with several reasons in the field of a robot in spite of excellent advantages. This paper proposes using a device management of the software architecture, which has a hierarchical structure, in a human-like robot. Especially, we applied to the rent business of the android platform, EveR1; the compound word of eve and robot. The device may be real mechanical parts like a sensor, motor, and camera or virtual parts like a motor arbiter, motion generator, and priority maker. The virtual parts are software components which are used in operating the android platform. The device management exists between hardware and software of a robot, and makes the hardware compatibility for applied to applications in the high layer of software. It is compatible due to separating similar functions of each device which is managed in the device management, and providing same abstract interfaces. For instance, an application developed by using a motor driver of one corporation is exchanged for a motor drive of the other corporation with minimal code modification.

  • Manufacturers' Problems in Selling Reliable Equipment and Systems

    Users must determine the degree of equipment and systems reliability that they require and can justify and must define their reliability requirements in their specifications. Manufacturers must establish reliability programs to determine how they can meet the users' reliability requirements. Industry must collect and publish equipment and system reliability data for use by both user and manufacturer.

  • How dependability studies contribute to controlling risks

    Dependability means ensuring the quality of a product over a period of time, i.e. from the moment the product leaves the factory to the end of its life. Many engineers and technicians make use of methods some of which form part of the dependability process. We discuss the methods used and the way in which they are organised. It is concluded that dependability should be formulated and implemented as early as possible, by favouring simple solutions and selecting recognized technologies. It is also used later to assist in the implementation of a production tool that is adapted and reliable. A reliable production process can be achieved by using process analyses that clearly illustrate the functions and risks. By reducing the latter, the production cycle will improve and the number of rejected items will diminish.<<ETX>>



Standards related to Manufactured products

Back to Top

No standards are currently tagged "Manufactured products"


Jobs related to Manufactured products

Back to Top