Conferences related to Machine shops

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2020 57th ACM/ESDA/IEEE Design Automation Conference (DAC)

The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2022 59th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2021 58th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2019 56th ACM/ESDA/IEEE Design Automation Conference (DAC)

    EDA (Electronics Design Automation) is becoming ever more important with the continuous scaling of semiconductor devices and the growing complexities of their use in circuits and systems. Demands for lower-power, higher-reliability and more agile electronic systems raise new challenges to both design and design automation of such systems. For the past five decades, the primary focus of research track at DAC has been to showcase leading-edge research and practice in tools and methodologies for the design of circuits and systems.

  • 2018 55th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2017 54th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2016 53nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2015 52nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2014 51st ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC Description for TMRF The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading

  • 2013 50th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 session on design methodologies and EDA tool developments, keynotes, panels, plus User Track presentations. A diverse worldwide community representing more than 1,000 organization attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2012 49th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers

  • 2011 48th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference is the world s leading technical conference and tradeshow on electronic design and design automation. DAC is where the IC Design and EDA ecosystem learns, networks, and does business.

  • 2010 47th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers.

  • 2009 46th ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC is the premier event for the electronic design community. DAC offers the industry s most prestigious technical conference in combination with the biggest exhibition, bringing together design, design automation and manufacturing market influencers.

  • 2008 45th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 250 of the leading electronics design suppliers.

  • 2007 44th ACM/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments and an Exhibition and Demo Suite area with over 250 of the leading EDA, silicon and IP Providers.

  • 2006 43rd ACM/IEEE Design Automation Conference (DAC)

  • 2005 42nd ACM/IEEE Design Automation Conference (DAC)

  • 2004 41st ACM/IEEE Design Automation Conference (DAC)

  • 2003 40th ACM/IEEE Design Automation Conference (DAC)

  • 2002 39th ACM/IEEE Design Automation Conference (DAC)

  • 2001 38th ACM/IEEE Design Automation Conference (DAC)

  • 2000 37th ACM/IEEE Design Automation Conference (DAC)

  • 1999 36th ACM/IEEE Design Automation Conference (DAC)

  • 1998 35th ACM/IEEE Design Automation Conference (DAC)

  • 1997 34th ACM/IEEE Design Automation Conference (DAC)

  • 1996 33rd ACM/IEEE Design Automation Conference (DAC)


2020 IEEE 18th International Conference on Industrial Informatics (INDIN)

INDIN focuses on recent developments, deployments, technology trends, and research results in Industrial Informatics-related fields from both industry and academia


2020 IEEE Frontiers in Education Conference (FIE)

The Frontiers in Education (FIE) Conference is a major international conference focusing on educational innovations and research in engineering and computing education. FIE 2019 continues a long tradition of disseminating results in engineering and computing education. It is an ideal forum for sharing ideas, learning about developments and interacting with colleagues inthese fields.


2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)

All topics related to engineering and technology management, including applicable analytical methods and economical/social/human issues to be considered in making engineering decisions.


More Conferences

Periodicals related to Machine shops

Back to Top

Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Automation Science and Engineering, IEEE Transactions on

The IEEE Transactions on Automation Sciences and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. We welcome results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, ...


Computers, IEEE Transactions on

Design and analysis of algorithms, computer systems, and digital networks; methods for specifying, measuring, and modeling the performance of computers and computer systems; design of computer components, such as arithmetic units, data storage devices, and interface devices; design of reliable and testable digital devices and systems; computer networks and distributed computer systems; new computer organizations and architectures; applications of VLSI ...


Control Systems Technology, IEEE Transactions on

Serves as a compendium for papers on the technological advances in control engineering and as an archival publication which will bridge the gap between theory and practice. Papers will highlight the latest knowledge, exploratory developments, and practical applications in all aspects of the technology needed to implement control systems from analysis and design through simulation and hardware.


More Periodicals

Most published Xplore authors for Machine shops

Back to Top

Xplore Articles related to Machine shops

Back to Top

Discussion on “electric drive in machine shops” (Fair) Philadelphia, Pa., October 13, 1913. (see proceedings for October, 1913)

Proceedings of the American Institute of Electrical Engineers, 1914

Harold Goodwin, Jr.: The speaker discussed the advantages of the individual drive and the cost of operation; but he left out apparently the cost of initial installation.


Electric drive in machine shops

Proceedings of the American Institute of Electrical Engineers, 1913

To increase production and to decrease cost are two important questions continually before the manufacturer. Since labor is the greatest cost of production, then, where machine tools are a considerable factor in the production, maximum output from the tool is a necessity. Tools that are limited in production because of a lack of power at the tool are a source ...


Direct- and Quarter-Wave-Coupled Microwave Band-Pass Filters with Adjustable Transmission Characteristics and Fixed Center Frequencies

IEEE Transactions on Microwave Theory and Techniques, 1964

A theoretical study of the properties of "constant-phase" two-ports is presented which leads to a simple experimental synthesis technique for a broad class of microwave band-pass filters. "Constant-phase" two-ports consisting of modified step-twist-junctions are employed in experimental multiple cavity direct-coupled filter configurations which have the unique property of continually adjustable bandpass characteristics and fixed center frequency. These experimentally obtained characteristics ...


Cost-Effective Computer-Aided Manufacturing of Prototype Parts

22nd ACM/IEEE Design Automation Conference, 1985

Computer-aided manufacturing (CAM) can be made cost effective, even for one- of-a-kind jobs. To do so requires reevaluation of Computerized Numerical Control (CNC) from the point of view of a computer system, rather than a glorified machine shop. Good systematization, useful software and cooperative CNC shop staff can improve the productivity of a typical CNC shop by a factor of ...


Curriculum driven classroom design

2015 IEEE Frontiers in Education Conference (FIE), 2015

Classrooms and learning environments are almost as diverse as the curriculum that is taught in them. However, one thing that almost all classrooms have in common is that they are designed before the curriculum is developed. This leads to the design of common, generalized learning environments. These generalizations can lead to inconveniences in the classrooms, which cause deficiencies in learning. ...


More Xplore Articles

Educational Resources on Machine shops

Back to Top

IEEE-USA E-Books

  • Discussion on “electric drive in machine shops” (Fair) Philadelphia, Pa., October 13, 1913. (see proceedings for October, 1913)

    Harold Goodwin, Jr.: The speaker discussed the advantages of the individual drive and the cost of operation; but he left out apparently the cost of initial installation.

  • Electric drive in machine shops

    To increase production and to decrease cost are two important questions continually before the manufacturer. Since labor is the greatest cost of production, then, where machine tools are a considerable factor in the production, maximum output from the tool is a necessity. Tools that are limited in production because of a lack of power at the tool are a source of expense to the manufacturer. Power cost is low while labor cost is high. The well designed motor-driven machine of today shows the motor as one of the main elements of the tool, it having short-circuited much of the old mechanical drive, and not as a mere adjunct to the tool. Too little thought is given in many cases to the possibilities of the electric drive for machine tools.

  • Direct- and Quarter-Wave-Coupled Microwave Band-Pass Filters with Adjustable Transmission Characteristics and Fixed Center Frequencies

    A theoretical study of the properties of "constant-phase" two-ports is presented which leads to a simple experimental synthesis technique for a broad class of microwave band-pass filters. "Constant-phase" two-ports consisting of modified step-twist-junctions are employed in experimental multiple cavity direct-coupled filter configurations which have the unique property of continually adjustable bandpass characteristics and fixed center frequency. These experimentally obtained characteristics are predicted from the theory.

  • Cost-Effective Computer-Aided Manufacturing of Prototype Parts

    Computer-aided manufacturing (CAM) can be made cost effective, even for one- of-a-kind jobs. To do so requires reevaluation of Computerized Numerical Control (CNC) from the point of view of a computer system, rather than a glorified machine shop. Good systematization, useful software and cooperative CNC shop staff can improve the productivity of a typical CNC shop by a factor of five.

  • Curriculum driven classroom design

    Classrooms and learning environments are almost as diverse as the curriculum that is taught in them. However, one thing that almost all classrooms have in common is that they are designed before the curriculum is developed. This leads to the design of common, generalized learning environments. These generalizations can lead to inconveniences in the classrooms, which cause deficiencies in learning. This problem is particularly true in engineering, where curriculum can be lecture based, design based, or project based. The goal with this project is to design a classroom and lab to fit the needs of specific undergraduate engineering curriculum. Allowing the classroom design to be driven by the curriculum that will eventually be taught there will result in a more efficient and effective learning environment. Current freshman engineering students in the existing labs were surveyed, and next year's freshman engineering students in the new lab will be surveyed to collect data about their experiences in the current learning environment. When the classroom construction is complete, a comparative analysis of the classroom dynamics both of the old and new classrooms will take place in order to determine the success of the work.

  • Lessons learned on using adaptive devices for the disabled to teach design

    At FIE94, the authors describe their first efforts at using the design and construction of devices for the disabled as the focal point for a junior-level Mechanical Engineering design course. This program has been expanded to include senior capstone projects and summer support for two undergraduates to work on extended projects. The construction costs of the projects have been funded through an NSF REU grant. In this paper the authors will describe projects which students have undertaken to illustrate the problems and potential of assistive technology as the source of design projects. Sources of information and networking through RESNA, the Center for Assistive Technology, and NSF will be given. There is a great satisfaction in providing a device for someone who cannot find an affordable solution to his/her problem. But these projects are not without their problems. Each project is a lesson for the students, as well as the instructor on effective design and project management. For the instructor the lesson is how to design and manage a course to teach design.

  • Surface cleaning of metals in air with a one atmosphere uniform glow discharge plasma

    Summary form only given, as follows. We report the use of active species generated in a one atmosphere uniform glow discharge plasma reactor with a parallel-plate configuration to clean the surface of as-received metal samples from the machine shop floor. The unmagnetized air plasma in this reactor had the following characteristic operating and plasma parameters: RF frequency, 1-4 kHz; RMS electric field, 9 kV/cm; RMS voltage, 4 kV; plasma number density, 10/sup 10//cm/sup 3/; and plasma power density of tens of milliwatts/cm/sup 3/. The experimental arrangement used to expose our 7 by 10 cm metal samples. The lower parallel-plate electrode is a flat copper plate, covered by a pyrex sheet. The upper electrode is formed by the bare metal sample plate, with the side to be cleaned facing the plasma. To assure plasma uniformity between the electrodes, it was helpful to direct a flow of air on the edges of the plasma volume. The cleanliness of the metal samples was determined with the standard sessile water drop test. In their as-received condition, the metal samples yielded a contact angle of 90/spl deg/ or more, indicating a non-wettable surface, presumably because of (adherent layers of hydrocarbon machine oils. After from 3 to 10 minutes of plasma exposure, however, the water-drop test yielded a contact angle well below 10/spl deg/, a very wettable surface. The metal surfaces would remain wettable for hours, until the surfaces became re-contaminated by exposure to the atmosphere.

  • Natural inferences in semiotic models

    An approach to semiotic modeling makes use of concept-oriented languages. We consider methods of inference in semiotic models formulated in the CONCEPT, a concept-oriented semiotic modeling language which is under development in MSIEM. Our special interest is in drawing natural inferences that are close enough to ones which may be observed in human reasoning. One type of natural inference is related to default reasoning. We adapt the default reasoning method of Hautamaki (1992). Other types of natural inference is related to natural logical deduction. We outline an original method for obtaining natural proofs in CONCEPT using the productions associated with CONCEPT statements.

  • The Operation of Machine Shops Individual Electric Motors

    Data concerning the load factor and operation of machine shops, and a description of the advantages derived from the use of individual electric motors. Illustrated.

  • Data exchange for machine shop simulation

    Manufacturing simulation systems normally provide interfaces for data import and export using proprietary formats. Dependent data interfaces limit simulation applications in the manufacturing industry. This paper describes a mechanism for transferring data between a traditional database and XML files, which represent a machine shop data model developed at the National Institute of Standards and Technology (NIST). The data model is described by XML (eXtensible Markup Language) and UML (Unified Modeling Language). The data transfer mechanism is based on document object model (DOM), XML path language (XPath), and open database connectivity (ODBC) database engines. A prototype implementation is also described in this paper



Standards related to Machine shops

Back to Top

No standards are currently tagged "Machine shops"


Jobs related to Machine shops

Back to Top