Conferences related to Emi Control

Back to Top

2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 American Control Conference (ACC)

The ACC is the annual conference of the American Automatic Control Council (AACC, the U.S. national member organization of the International Federation for Automatic Control (IFAC)). The ACC is internationally recognized as a premier scientific and engineering conference dedicated to the advancement of control theory and practice. The ACC brings together an international community of researchers and practitioners to discuss the latest findings in automatic control. The 2020 ACC technical program will

  • 2019 American Control Conference (ACC)

    Technical topics include biological systems, vehicle dynamics and control, adaptive control, consensus control, cooperative control, control of communication networks, control of networked systems, control of distributed parameter systems, decentralized control, delay systems, discrete-event systems, fault detection, fault-tolerant systems, flexible structures, flight control, formation flying, fuzzy systems, hybrid systems, system identification, iterative learning control, model predictive control, linear parameter-varying systems, linear matrix inequalities, machine learning, manufacturing systems, robotics, multi-agent systems, neural networks, nonlinear control, observers, optimal control, optimization, path planning, navigation, robust control, sensor fusion, sliding mode control, stochastic systems, switched systems, uncertain systems, game theory.

  • 2018 Annual American Control Conference (ACC)

    Technical topics include biological systems, vehicle dynamics and control, adaptive control, consensus control, cooperative control, control of communication networks, control of networked systems, control of distributed parameter systems, decentralized control, delay systems, discrete-event systems, fault detection, fault-tolerant systems, flexible structures, flight control, formation flying, fuzzy systems, hybrid systems, system identification, iterative learning control, model predictive control, linear parameter-varying systems, linear matrix inequalities, machine learning, manufacturing systems, robotics, multi-agent systems, neural networks, nonlinear control, observers, optimal control, optimization, path planning, navigation, robust control, sensor fusion, sliding mode control, stochastic systems, switched systems, uncertain systems, game theory.

  • 2017 American Control Conference (ACC)

    Technical topics include biological systems, vehicle dynamics and control, adaptive control, consensus control, cooperative control, control of communication networks, control of networked systems, control of distributed parameter systems, decentralized control, delay systems, discrete-event systems, fault detection, fault-tolerant systems, flexible structures, flight control, formation flying, fuzzy systems, hybrid systems, system identification, iterative learning control, model predictive control, linear parameter-varying systems, linear matrix inequalities, machine learning, manufacturing systems, robotics, multi-agent systems, neural networks, nonlinear control, observers, optimal control, optimization, path planning, navigation, robust control, sensor fusion, sliding mode control, stochastic systems, switched systems, uncertain systems, game theory.

  • 2016 American Control Conference (ACC)

    Control systems theory and practice. Conference topics include biological systems, vehicle dynamics and control, consensus control, cooperative control, control of communication networks, control of networked systems, control of distributed parameter systems, decentralized control, delay systems, discrete-event systems, fault detection, fault-tolerant systems, flexible structures, flight control, formation flying, fuzzy systems, hybrid systems, system identification, iterative learning control, model predictive control, linear parameter-varying systems, linear matrix inequalities, machine learning, manufacturing systems, robotics, multi-agent systems, neural networks, nonlinear control, observers, optimal control, optimization, path planning, navigation, robust control, sensor fusion, sliding mode control, stochastic systems, switched systems, uncertain systems, game theory.

  • 2015 American Control Conference (ACC)

    control theory, technology, and practice

  • 2014 American Control Conference - ACC 2014

    All areas of the theory and practice of automatic control, including but not limited to network control systems, model predictive control, systems analysis in biology and medicine, hybrid and switched systems, aerospace systems, power and energy systems and control of nano- and micro-systems.

  • 2013 American Control Conference (ACC)

    Control systems theory and practice. Conference themes on sustainability, societal challenges for control, smart healthcare systems. Conference topics include biological systems, vehicle dynamics and control, consensus control, cooperative control, control of communication networks, control of networked systems, control of distributed parameter systems, decentralized control, delay systems, discrete-event systems, fault detection, fault-tolerant systems, flexible structures, flight control, formation flying, fuzzy systems, hybrid systems, system identification, iterative learning control, model predictive control, linear parameter-varying systems, linear matrix inequalities, machine learning, manufacturing systems, robotics, multi-agent systems, neural networks, nonlinear control, observers, optimal control, optimization, path planning, navigation, robust control, sensor fusion, sliding mode control, stochastic systems, switched systems, uncertain systems, game theory.

  • 2012 American Control Conference - ACC 2012

    All areas of control engineering and science.

  • 2011 American Control Conference - ACC 2011

    ACC provides a forum for bringing industry and academia together to discuss the latest developments in the area of Automatic Control Systems, from new control theories, to the advances in sensors and actuator technologies, and to new applications areas for automation.

  • 2010 American Control Conference - ACC 2010

    Theory and practice of automatic control

  • 2009 American Control Conference - ACC 2009

    The 2009 ACC technical program will cover new developments related to theory, application, and education in control science and engineering. In addition to regular technical sessions the program will also feature interactive and tutorial sessions and preconference workshops.

  • 2008 American Control Conference - ACC 2008

  • 2007 American Control Conference - ACC 2007

  • 2006 American Control Conference - ACC 2006 (Silver Anniversary)

  • 2005 American Control Conference - ACC 2005

  • 2004 American Control Conference - ACC 2004

  • 2003 American Control Conference - ACC 2003

  • 2002 American Control Conference - ACC 2002

  • 2001 American Control Conference - ACC 2001

  • 2000 American Control Conference - ACC 2000

  • 1999 American Control Conference - ACC '99

  • 1998 American Control Conference - ACC '98

  • 1997 American Control Conference - ACC '97

  • 1996 13th Triennial World Congress of the International Federation of Automatic Control (IFAC)


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


More Conferences

Periodicals related to Emi Control

Back to Top

Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Circuits and Systems II: Express Briefs, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


Circuits and Systems Magazine, IEEE


Computer

Computer, the flagship publication of the IEEE Computer Society, publishes peer-reviewed technical content that covers all aspects of computer science, computer engineering, technology, and applications. Computer is a resource that practitioners, researchers, and managers can rely on to provide timely information about current research developments, trends, best practices, and changes in the profession.


Control Systems Magazine, IEEE

The magazine covers theory, analysis, design (computer-aided design), and practical implementation of circuits, and the application of circuit theoretic techniques to systems and to signal processing. Content is written for the spectrum of activities from basic scientific theory to industrial applications.


More Periodicals

Most published Xplore authors for Emi Control

Back to Top

Xplore Articles related to Emi Control

Back to Top

American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control—Calibration and Qualification of Antennas (9 kHz to 40 GHz) - Corrigendum 1

ANSI C63.5-2017/Cor 1-2019 (Corrigendum to ANSI C63.5-2017), 2019

Methods for determining antenna factors of antennas used for radiated emission measurements in electromagnetic interference (EMI) control from 9 kHz to 40 GHz are provided. Antennas included are linearly polarized antennas such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic dipole arrays, biconical and log-periodic dipole array hybrids, broadband horns, etc., that are used in measurements prescribed by ANSI ...


EMI control plan for ships

1995 International Conference on Electromagnetic Interference and Compatibility (INCEMIC), 1995

Modern ships have numerous communication, navigation, propulsion, power generation and fire control equipment. Technological advances in these systems has made the EMI equation more complex. Today the concept of EMI management and control takes a very high precedence in overall systems management. Minor faults and alarms could lead to the loss of several lives. Undesired signals from one equipment could ...


Response of an overhead wire near a NEMP simulator

IEEE Transactions on Electromagnetic Compatibility, 1990

The response of an overhead wire illuminated by a simulated nuclear electromagnetic pulse (NEMP) was experimentally investigated. The wire is 70 m long, 7 mm in diameter, and situated 5 m above the ground. It is located 20 m away from a hybrid-type EMP simulator. The simulator is a resistively loaded elliptical loop structure with its pulse generator located 20 ...


A study of “soft grounding” of tools for ESD/EOS/EMI control

2007 29th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD), 2007

The effect of a discrete resistor placed in the ground wire connected to a metal tool block or hand tool on ESD/EOS/EMI control is studied. Experimental results and SPICE circuit simulations show that in most cases "soft grounding" results in no reduction in CDM current, noise voltage or radiated fields (EMI) because of capacitive coupling. However, using a high-resistance, static ...


Properties of indium oxide thin films prepared by reactive electron beam evaporation technique for EMI control

Proceedings of the International Conference on Electromagnetic Interference and Compatibility, 1999

The phenomenon of electromagnetic interference (EMI) is well known. For the specific case of video displays the EMI control requires transparency in the visible spectrum. In the present paper, the EMI shielding properties of indium oxide (IO) thin films have been studied. These IO thin films of thickness ranging between 100-150 nm have been prepared on glass substrates by the ...


More Xplore Articles

Educational Resources on Emi Control

Back to Top

IEEE-USA E-Books

  • American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control—Calibration and Qualification of Antennas (9 kHz to 40 GHz) - Corrigendum 1

    Methods for determining antenna factors of antennas used for radiated emission measurements in electromagnetic interference (EMI) control from 9 kHz to 40 GHz are provided. Antennas included are linearly polarized antennas such as loops, rods (monopoles), tuned dipoles, biconical dipoles, log-periodic dipole arrays, biconical and log-periodic dipole array hybrids, broadband horns, etc., that are used in measurements prescribed by ANSI C63.4 and ANSI C63.10. The antenna calibration methods include standard site method (i.e., three- antenna method), reference antenna method, equivalent capacitance substitution method, standard transmit loop method, standard antenna method, and standard field method. The selection of attenuation in 5.1.1 e) is addressed in this corrigendum, such that a maximum VSWR of 2:1 is achieved.

  • EMI control plan for ships

    Modern ships have numerous communication, navigation, propulsion, power generation and fire control equipment. Technological advances in these systems has made the EMI equation more complex. Today the concept of EMI management and control takes a very high precedence in overall systems management. Minor faults and alarms could lead to the loss of several lives. Undesired signals from one equipment could lead to malfunctioning of another important equipment. Today all electrical, hull and propulsion equipment need to be checked and proved correct for intra-ship EMI elimination before commissioning. Rapid advancement are taking place in ship systems technology. Similar advancements is needed in EMI control and EMI avoidance to ensure that overall systems functioning is efficient. This paper discusses the existing EMC system and the various shortcomings existing in them. It also discusses the various EMI techniques available for measurement, and proposes an EMI control plan to overcome the existing drawbacks.

  • Response of an overhead wire near a NEMP simulator

    The response of an overhead wire illuminated by a simulated nuclear electromagnetic pulse (NEMP) was experimentally investigated. The wire is 70 m long, 7 mm in diameter, and situated 5 m above the ground. It is located 20 m away from a hybrid-type EMP simulator. The simulator is a resistively loaded elliptical loop structure with its pulse generator located 20 m above the ground. The overhead wire is terminated with various combinations of short circuit, open circuit, and characteristic impedance at the two ends, and the current response is measured at one end and in the middle. The measured responses are compared with calculated values from available analytical models.<<ETX>>

  • A study of “soft grounding” of tools for ESD/EOS/EMI control

    The effect of a discrete resistor placed in the ground wire connected to a metal tool block or hand tool on ESD/EOS/EMI control is studied. Experimental results and SPICE circuit simulations show that in most cases "soft grounding" results in no reduction in CDM current, noise voltage or radiated fields (EMI) because of capacitive coupling. However, using a high-resistance, static dissipative material at the interface between the device input and metal tool was extremely effective in reducing the voltage and current associated with ESD/EOS/EMI and increased the CDM failure level of a Class 0 ESD sensitive device from 5 V to over 200 V.

  • Properties of indium oxide thin films prepared by reactive electron beam evaporation technique for EMI control

    The phenomenon of electromagnetic interference (EMI) is well known. For the specific case of video displays the EMI control requires transparency in the visible spectrum. In the present paper, the EMI shielding properties of indium oxide (IO) thin films have been studied. These IO thin films of thickness ranging between 100-150 nm have been prepared on glass substrates by the reactive electron beam evaporation technique. The electrical and optical properties of these IO films have been studied by varying the substrate temperature. The films have a resistivity of the order of 1.0/spl times/10/sup -4/ ohm cm and an optical transparency of 85%. It is found that the EMI shielding efficiency (SE) of IO films (of 100 nm thickness) is very much comparable to that of the silver coated metal sheet in the measured frequency range 1 MHz to 800 MHz. In order to understand these results, preliminary analyses have been carried out by evaluating the conducting carrier density and the AC magnetic susceptibility measurements. The analyses clearly indicate the required properties of IO films for EMI applications.

  • Develop a demonstration kit for education of circuit design with radiated EMI control

    An EMC demonstration kit was developed to demonstrate some fundamental design guides in high-speed circuit design with radiated EMI control. The effect of these design guides on radiated EMI was presented through the comparison between good design and bad design. In addition, a practical example was also developed with digital TV set-top box to let the audience have a real-life experience on the impact of radiated EMI.

  • Intrasystem EMI control in high frequency communication system

    This paper describes some noise reduction techniques and EMI control for a high frequency telecommunication system which operates on an internal clock frequency between 20 MHz and 100 MHz. Various power distribution techniques, signal and clock distribution and grounding structures were tried. Methods giving better results are described. These if implemented in the early design stage save substantial design time and effort. The authors discuss an SDH optical fibre based synchronous multiplexer in particular.

  • EMI control methodologies-application in a low cost TV demodulator system

    Electromagnetic radiations from various natural and man-made sources usually affect the performance and longevity of various electronic systems provided appropriate control techniques are not applied to protect them. Severe electromagnetic interference (EMI), at times, causes permanent damage to various components/subsystems/systems requiring compulsory applications of control methodologies from the system design to the evaluation. An indigenously built low cost TV demodulator system, developed by the the Heavy Electronics Engineering Group of ER&DC, Calcutta is described with the focus on the application of various EMI control techniques for safety and the secure performance of the system.

  • CISPR sampling schemes (EMI control)

    A sampling scheme has been developed whereby tests on, say, six appliances could provide evidence that a high percentage of appliances in production were within the prescribed EM emission limits. Now popularly known as the 80/80 rule, it ensures that 80% of appliances in production were in compliance with a confidence level of 80%. Another scheme is based on the binomial distribution. This scheme is sampling by attributes in which a number of items are tested against a given limit and either pass or fail.<<ETX>>

  • Achieving the enhanced reliability of electronic system by application of EMI control measures

    EMC is practiced in efficient operation, maintenance of reliability and safety of various electronic systems used in military and civil sectors and medicare. In the Indian context, it is essential to make indigenous products acceptable and competitive in domestic and international markets, especially in the European union, by designing reliable equipment. This paper addresses the following: (a) quality control for VLSI based systems through good EMC design practices, (b) sub-system module packaging, (c) hardening of electronic components for EMC and reliability, (d) protection of transient effects on digital circuits, (e) component-value-optimisation and (f) EMC maintenance considerations. The measurement results complying with the FCC specifications (class B) are included for a microprocessor subsystem.



Standards related to Emi Control

Back to Top

IEEE Recommended Practice for Electric Power Systems in Commercial Buildings


IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications

The project defines a standard for high-speed (>100 Mbps at the physical layer) communication devices via electric power lines, so-called broadband over power line (BPL) devices. This standard uses transmission frequencies below 100 MHz. It is usable by all classes of BPL devices, including BPL devices used for the first-mile/last-mile connection (<1500 m to the premise) to broadband services as ...


IEEE Standard for Motor Vehicle Event Data Recorder (MVEDR)

Motor Vehicle Event Data Recorders (MVEDRs) collect, record, store and export data related to motor vehicle pre-defined events. This standard defines a protocol for MVEDR output data compatibility and export protocols of MVEDR data elements. This standard does not prescribe which specific data elements shall be recorded, or how the data are to be collected, recorded and stored. It is ...



Jobs related to Emi Control

Back to Top