Conferences related to Industry Applications Society

Back to Top

2020 IEEE IAS Petroleum and Chemical Industry Committee (PCIC)

The PCIC provides an international forum for the exchange of electrical applications technology related to the petroleum and chemical industry. The PCIC annual conference is rotated across North American locations of industry strength to attract national and international participation. User, manufacturer, consultant, and contractor participation is encouraged to strengthen the conference technical base. Success of the PCIC is built upon high quality papers, individual recognition, valued standards activities, mentoring, tutorials, networking and conference sites that appeal to all.


2020 IEEE Industry Applications Society Annual Meeting

The Annual Meeting is a gathering of experts who work and conduct research in the industrial applications of electrical systems.


2017 IEEE International Conference on Mechatronics and Automation (ICMA)

The objective of ICMA 2017 is to provide a forum for researchers, educators,engineers, andgovernment officials involved in the general areas of mechatronics, robotics,automation and sensors to disseminate their latest research results and exchange views on thefuture research directions.


2017 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

computer vision, image processing, pattern recognition, and related areas.

  • 2016 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

    The scope of the conference include but not limit to: Image coding and processing, shape and texture analysis, Surveillance, Defence and industrial applications, Remote sensing and spectral imaging, Astronomical image analysis,Statistical and structural pattern recognition, Machine learning,Computer vision,Human-computer interaction,Biomedical and e-health applications,Content-based image retrieval and image databases.

  • 2015 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

    This conference will cover all areas of pattern recognition, image processing, machine learning and medical imaging techniques and their application. The aim of this conference also is to bring together national and international experts to share their experiences and to promote research and development in Computer Vision and Pattern Recognition.

  • 2014 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

    The International Conference on Digital Image Computing: Techniques and Applications(DICTA) is an International Conference focusing on computer vision, image processing, patternrecognition, and related areas. DICTA was established as a biennial conference in 1991 andbecame an annual event in 2007. It is the premier conference of the Australian PatternRecognition Society (APRS).

  • 2013 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

    The International Conference on Digital Image Computing: Techniques and Applications (DICTA) is the main Australian Conference on computer vision, image processing, pattern recognition, and related areas. DICTA was established as a biennial conference in 1991 and became an annual event in 2007. It is the premier conference of the Australian Pattern Recognition Society (APRS).

  • 2012 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

    he International Conference on Digital Image Computing: Techniques and Applications (DICTA) is the main Australian Conference on computer vision, image processing, pattern recognition, and related areas. DICTA was established as a biannual conference in 1991 and became an annual event in 2007. It is the premiere conference of the Australian Pattern Recognition Society (APRS).

  • 2011 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

    DICTA is the premiere conference of the Australian Pattern Recognition Society (APRS) focusing on Image Processing, Computer Vision, Pattern Recognition and related areas. It is a major outlet for published work in these fields and one of the main vehicles for engagement between the Australian research community and industry.

  • 2010 International Conference on Digital Image Computing: Techniques and Applications (DICTA)

    (DICTA) is the main Australian conference on machine vision, image processing, pattern recognition and related areas. Since its establishment, DICTA has been a biannual meeting. In 2008, it turned into an annual conference. It is the conference of the Australian Pattern Recognition Society (APRS).

  • 2009 Digital Image Computing: Techniques and Applications (DICTA)

    DICTA is the main Australian conference on digital image processing, machine vision and related areas. DICTA2009 will be the eleventh meeting hosted by Australian Pattern Recognition Society (APRS). This conference typically attracts 120 participants from Australia and the Asia Pacific regions as well as many international researchers.

  • 2007 Digital Image Computing Techniques and Applications DICTA

    DICTA is hosted by the Australian Pattern Recognition Society and is held in odd numbered years. DICTA typically attracts 150 participants including many international researchers. DICTA 2007 is the ninth meeting of this conference and comprise international keynote speakers, parallel sessions of contributed papers, and posters. The conference will be run as a DEST category E1 conference, including double peer review of full papers.


2014 IEEE/IAS 50th Industrial & Commercial Power Systems Technical Conference (I&CPS)

Technical conference on industrial and commerical power systems include engineering, protection, grounding, reliability and standards.


More Conferences

Periodicals related to Industry Applications Society

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Circuits and Systems, IEEE Transactions on

The Transactions on Biomedical Circuits and Systems addresses areas at the crossroads of Circuits and Systems and Life Sciences. The main emphasis is on microelectronic issues in a wide range of applications found in life sciences, physical sciences and engineering. The primary goal of the journal is to bridge the unique scientific and technical activities of the Circuits and Systems ...


Biomedical Engineering, IEEE Reviews in

The IEEE Reviews in Biomedical Engineering will review the state-of-the-art and trends in the emerging field of biomedical engineering. This includes scholarly works, ranging from historic and modern development in biomedical engineering to the life sciences and medicine enabled by technologies covered by the various IEEE societies.


Circuits and Systems Magazine, IEEE


More Periodicals

Most published Xplore authors for Industry Applications Society

Back to Top

Xplore Articles related to Industry Applications Society

Back to Top

Enter the Zucker Design Contest [Education department news]

IEEE Industry Applications Magazine, 2005

None


Luminaire Design Related to Visibility

IEEE Transactions on Industry Applications, 1973

Design of luminaires and lighting systems traditionally has been made in accordance with the criterion of providing adequate levels of ilumination. The problem of overcoming ``veiling reflection'' effects, which cause great losses of visibility, largely has been overlooked. This has resulted in the ``visual performance'' of persons engaged in tasks such as reading and writing seriously being impaired. This paper ...


Selection of the flux reference for induction machine drives in the field weakening region

IEEE Transactions on Industry Applications, 1992

In a conventional rotor flux-oriented (RFO) induction machine drive, the flux reference is usually made proportional to the inverse of the rotor speed for field-weakening operation. It is indicated in this paper, however, that such a variation cannot maintain optimal (maximum) torque capability of the machine over the entire speed range. It is further indicated that a nearly optimal torque ...


Electrostatic painting of plastics using metal backing

IEEE Transactions on Industry Applications, 1993

This work explains theoretically and experimentally the fundamental differences between spraying metal and plastic panels electrostatically. Mechanisms of charge dissipation from plastic surfaces are discussed and a simple method is proposed for determining the electrostatic sprayability of plastic substrates. Using a 1-D analytical model, it is shown that the effect of charge accumulation can be minimized by appropriately placing a ...


Detection of extremely small particles in the nanometer and ionic size range

IEEE Transactions on Industry Applications, 1988

A high-sensitivity aerosol detector using pre-onset positive corona pulses has been constructed. It is expected to be used for the detection of very fine particles in a size range down to the nanometer and ionic. Preliminary tests of the detector to find the correlation between the pulses and the particles (or ions) have revealed that three different kinds of pulses ...


More Xplore Articles

Educational Resources on Industry Applications Society

Back to Top

IEEE-USA E-Books

  • Enter the Zucker Design Contest [Education department news]

    None

  • Luminaire Design Related to Visibility

    Design of luminaires and lighting systems traditionally has been made in accordance with the criterion of providing adequate levels of ilumination. The problem of overcoming ``veiling reflection'' effects, which cause great losses of visibility, largely has been overlooked. This has resulted in the ``visual performance'' of persons engaged in tasks such as reading and writing seriously being impaired. This paper describes the cause and evaluation of veiling reflections and shows how lighting equipment can be designed to overcome the deleterious effects, without sacrificing other requirements of the system.

  • Selection of the flux reference for induction machine drives in the field weakening region

    In a conventional rotor flux-oriented (RFO) induction machine drive, the flux reference is usually made proportional to the inverse of the rotor speed for field-weakening operation. It is indicated in this paper, however, that such a variation cannot maintain optimal (maximum) torque capability of the machine over the entire speed range. It is further indicated that a nearly optimal torque capability can be achieved in a stator flux-oriented (SFO) system when the stator flux reference is varied as the inverse of the rotor speed.<<ETX>>

  • Electrostatic painting of plastics using metal backing

    This work explains theoretically and experimentally the fundamental differences between spraying metal and plastic panels electrostatically. Mechanisms of charge dissipation from plastic surfaces are discussed and a simple method is proposed for determining the electrostatic sprayability of plastic substrates. Using a 1-D analytical model, it is shown that the effect of charge accumulation can be minimized by appropriately placing a grounded metal backing behind the plastic substrate. Experiments were conducted in a spray booth environment and the results showed good agreement with those predicted theoretically. Special metal backings with indentations and gaps were used to study the effect of a mismatch between the plastic substrate and its metal backing on the quality of the paint finish.<<ETX>>

  • Detection of extremely small particles in the nanometer and ionic size range

    A high-sensitivity aerosol detector using pre-onset positive corona pulses has been constructed. It is expected to be used for the detection of very fine particles in a size range down to the nanometer and ionic. Preliminary tests of the detector to find the correlation between the pulses and the particles (or ions) have revealed that three different kinds of pulses exist. Large pulses, which have the highest peak value of the three, appear only in the moist air; they do not respond to ions or particles. Small pulses, with a much smaller height, are observed in both dry air and moist air. No definite relation is observed between their number and the number of particles coming into the detector. Micropulses with the smallest height have been found to appear in response to negative ions or negatively charged particles. Using an ion filter which separates ions according to their electrical mobilities, the lowest mobility of the negative ions in the the sample air has been measured to be 0.6-0.8 cm/sup 2//Vs from the micropulses. The lower limit of the mobility of the particles detectable with the present detector is 2*10/sup -3/-4*10/sup -3/ cm/sup 2//V s.<<ETX>>

  • Innovations in Solid-State Protective Relays

    Solid-state relays are now available to provide virtually all of the functions traditionally associated with the protection of medium voltage circuits. This new technology allows us to take a new look at some old problems, and take advantage of improved performance characteristics.

  • Analysis of the Effect of ESD on the Operation of MEMS

    The effect of charge injection due to electrostatic discharge on the operation of capacitive microelectromechanical-systems (MEMS) structures is studied. A summary of charge transfer for the human-body model, the charged-device model (CDM), and the field-induced CDM is presented. The reliability of MEMS due to the trapped charge is assessed using a figure of merit based on the forces due to the voltage and charge states of operation. An electric-field model for the air gap and dielectric layer is employed to determine surface-charge densities to yield the breakdown of the air gap or dielectric layer and the onset of stiction.

  • Report of Large Motor Reliability Survey of Industrial and Commercial Installations, Part II

    In 1983 the initial results of an IEEE survey on large motors was published and presented at the 1983 I&CPS Conference. This was the first presentation of the results of a survey completed in 1982 of motors larger than 200 hp and no older than 15 years. The results presented here of the 1982 survey are to investigate the data further to address questions generated by the results of the earlier paper, to find additional correlations of the reliability criteria of some of the more interesting categories, and to bring out more results and categories available from the survey data. For information on the overall survey response and the general results of the surveyed categories, refer to the previous paper.

  • Sampling of discontinuous voltage and current signals in electrical drives: a system approach

    Various methods for sampling of voltage and current signals in electrical drives are analyzed and compared, two new methods for sampling the discontinuous voltage and current signals in a pulsewidth modulation drive are proposed. The methods are based on sampling the instantaneous values and locally averaged values (over one carrier period) of signals. Analytical expressions for adjustment of digital current regulators and achievable bandwidths with the various sampling methods are derived. The results are experimentally verified.

  • Corona Charging Method for Controlled Production of Film Electrets

    A screen-controlled corona charging method has been developed for use in the production of film electrets. The charge controller uses feedback and feedforward charge sensor information to attain a required film voltage, independent of the initial film voltage. Compared to a roller charging method, this method gives a more uniform surface potential and also improves the charge storage characteristics, as tests with the thermally stimulated discharge method have shown.



Standards related to Industry Applications Society

Back to Top

IEEE Application Guide for Distributed Digital Control and Monitoring for Power Plants


IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants

The scope of this project has been expanded to no only cover power and control cables (per original PAR) but many types of special purpose cables used in the petroleum and chemical industry. This Guide provides the user information on cable standards, specifications, applications, installations, testing and areas of interest on cable pertaining to the petrochemical industry. Special purpose cables ...



Jobs related to Industry Applications Society

Back to Top