Conferences related to Impurities

Back to Top

2020 Joint Conference of the IEEE International Frequency Control Symposium and International Symposium on Applications of Ferroelectrics (IFCS-ISAF)

Ferroelectric materials and applications


2020 IEEE International Power Modulator and High Voltage Conference (IPMHVC)

This conference provides an exchange of technical topics in the fields of Solid State Modulators and Switches, Breakdown and Insulation, Compact Pulsed Power Systems, High Voltage Design, High Power Microwaves, Biological Applications, Analytical Methods and Modeling, and Accelerators.


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 IEEE Photovoltaic Specialists Conference (PVSC)

Promote science and engineering of photovoltaic materials, devices, systems and applications



Periodicals related to Impurities

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on

Methods, algorithms, and human-machine interfaces for physical and logical design, including: planning, synthesis, partitioning, modeling, simulation, layout, verification, testing, and documentation of integrated-circuit and systems designs of all complexities. Practical applications of aids resulting in producible analog, digital, optical, or microwave integrated circuits are emphasized.


Dielectrics and Electrical Insulation, IEEE Transactions on

Electrical insulation common to the design and construction of components and equipment for use in electric and electronic circuits and distribution systems at all frequencies.


Display Technology, Journal of

This publication covers the theory, design, fabrication, manufacturing and application of information displays and aspects of display technology that emphasize the progress in device engineering, device design, materials, electronics, physics and reliabilityaspects of displays and the application of displays.



Most published Xplore authors for Impurities

Back to Top

Xplore Articles related to Impurities

Back to Top

A new type of gallium arsenide field-effect phototransistor

1971 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1971

A gallium-arsenide field-effect phototransistor, which responds to infrared radiation at a wavelength of 1.5 μ will be covered. The device is fabricated from chromium-doped semi-insulating GaAs with a thin epitaxial N-type surface layer.


Nuclear minerals plants in Brazil — Case studies

Tsinghua Science and Technology, 2006

This paper presents the process flow sheet of the main nuclear industrial units in Brazil and discusses some solvent extraction technical support required for these plants. The Center for the Development of Nuclear Technology-CDTN has been investigating alternative ways to supply the nuclear industry in order to improve the industrial processes. Some case study examples are presented, Emulsion from Uranium ...


Ductile tungsten

Proceedings of the American Institute of Electrical Engineers, 1910

When work was first started on the problem of producing a ductile form of tungsten, the metal looked very uncompromising. It was so hard that it could not be filed without detriment to the file, and was, at ordinary temperatures, very brittle.


Correction to "Relation of a Physical Process to the Reliability of Electronic Components"

IEEE Transactions on Reliability, 1968

None


Electrical characteristics and modeling of ion-implanted resistors

1976 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1976

This paper will discuss tradeoffs between sheet resistance, operating voltage, temperature and other process parameters modeled and experimentally verified for boron-implanted resistors over a broad range of process and operating conditions.



Educational Resources on Impurities

Back to Top

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Impurities"

IEEE-USA E-Books

  • A new type of gallium arsenide field-effect phototransistor

    A gallium-arsenide field-effect phototransistor, which responds to infrared radiation at a wavelength of 1.5 μ will be covered. The device is fabricated from chromium-doped semi-insulating GaAs with a thin epitaxial N-type surface layer.

  • Nuclear minerals plants in Brazil — Case studies

    This paper presents the process flow sheet of the main nuclear industrial units in Brazil and discusses some solvent extraction technical support required for these plants. The Center for the Development of Nuclear Technology-CDTN has been investigating alternative ways to supply the nuclear industry in order to improve the industrial processes. Some case study examples are presented, Emulsion from Uranium Solvent Extraction Plant and Itataia Uranium Developments. In Caitite industrial plant the water recirculation has caused continuous changes in the composition of pregnant liquor mainly in the sulfate and chloride concentrations. After some water recirculation cycles, a decrease in the uranium extraction efficiency was noted which was followed by the formation of stable emulsion at the uranium extraction stage. Itataia Uranium Developments were performed in a pilot plant for Itataia ore. This ore has the uranium mineral associated to the phosphate. The process consists of four main steps: 1) phosphate concentration, 2) chemical digestion of the concentrate to produce phosphoric acid with dissolved uranium, 3) uranium recovery, and 4) phosphoric acid purification by solvent extraction.

  • Ductile tungsten

    When work was first started on the problem of producing a ductile form of tungsten, the metal looked very uncompromising. It was so hard that it could not be filed without detriment to the file, and was, at ordinary temperatures, very brittle.

  • Correction to "Relation of a Physical Process to the Reliability of Electronic Components"

    None

  • Electrical characteristics and modeling of ion-implanted resistors

    This paper will discuss tradeoffs between sheet resistance, operating voltage, temperature and other process parameters modeled and experimentally verified for boron-implanted resistors over a broad range of process and operating conditions.

  • Corrections To "Analytical Model For Threshold Voltage Shift Due To Impurity Penetration Through A Thin Gate Oxide"

    None

  • Mechanisms Affecting Long Conduction Time Plasma Opening Switches

    None

  • N versus P channel for single-supply TTL compatibility

    The application of N and P-channel processes to 5-V circuits with TTL inout/output compatibility will be discussed. Silicon-gate isoplanar processing with depletion-load devices will be covered.

  • Errata

    None

  • Understanding the Non-ideal pn Junction - Theoretical Reconsideration

    This chapter challenges theoretical reconsideration and prediction of current versus voltage characteristics of the non-ideal pn junction. Here, the_imref_gradient is introduced in the depletion region, which was not assumed by Dr W. Shockley. The impact of a new assumption on current versus voltage characteristics of the pn junction is theoretically considered.



Standards related to Impurities

Back to Top

No standards are currently tagged "Impurities"