Conferences related to ISO

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE IAS Electrical Safety Workshop (ESW)

Accelerate application of breakthrough improvements in human factors, technology, and managing systems that reduce risk of electrical injuries. Stimulate innovation in overcoming barriers. Change and advance the electrical safety culture to enable sustainable improvements in prevention of electrical accidents and injuries


2020 IEEE IAS Petroleum and Chemical Industry Committee (PCIC)

The PCIC provides an international forum for the exchange of electrical applications technology related to the petroleum and chemical industry. The PCIC annual conference is rotated across North American locations of industry strength to attract national and international participation. User, manufacturer, consultant, and contractor participation is encouraged to strengthen the conference technical base. Success of the PCIC is built upon high quality papers, individual recognition, valued standards activities, mentoring, tutorials, networking and conference sites that appeal to all.


More Conferences

Periodicals related to ISO

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Audio, Speech, and Language Processing, IEEE Transactions on

Speech analysis, synthesis, coding speech recognition, speaker recognition, language modeling, speech production and perception, speech enhancement. In audio, transducers, room acoustics, active sound control, human audition, analysis/synthesis/coding of music, and consumer audio. (8) (IEEE Guide for Authors) The scope for the proposed transactions includes SPEECH PROCESSING - Transmission and storage of Speech signals; speech coding; speech enhancement and noise reduction; ...


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Broadcasting, IEEE Transactions on

Broadcast technology, including devices, equipment, techniques, and systems related to broadcast technology, including the production, distribution, transmission, and propagation aspects.


More Periodicals

Most published Xplore authors for ISO

Back to Top

No authors for "ISO"


Xplore Articles related to ISO

Back to Top

International Laser Standards

LEOMA and the US Laser Industry: The Good and Bad Moves for Trade Associations in Emerging High-Tech Industries, None

As early as January 1987, the LAA board initiated its involvement with the laser committee of the International Electrotechnical Commission (IEC). In the early 1980s, Germany adopted a standard for the threads on microscope objectives, and proposed that the standard be adopted by the International Organization for Standards. It was the IEC Laser Committee (IEC TC76) that was developing standards ...


Incorporating short-term stored energy resource into Midwest ISO energy and ancillary service market

2011 IEEE Power and Energy Society General Meeting, 2011

Summary form only given. The purpose of this paper is to analyze various approaches to incorporate short-term stored energy resources into the Midwest ISO co-optimized energy and ancillary service market. Based on the analysis, the best approach is to utilize short-term stored energy resources for regulating reserve with the real-time energy dispatch to be set in such a way that ...


Guidance on physicochemical characterization for manufacture nano-objects submitted for toxicological testing

2011 11th IEEE International Conference on Nanotechnology, 2011

This document provides the consensus results by a group of international expert of physicochemical parameters for detailed description of manufactured nano-objects subjected to toxicologic testing. Eight physic-chemical parameters are presented. The full Technical Report will be published shortly by ISO.


Demand Response opportunities & challenges for regulated and retail choice footprint

IEEE PES General Meeting, 2010

This paper discusses launch of the energy market in 2005 and the ancillary services market in 2009. Despite the growth in demand resource participation in the Midwest ISO markets since the launch of the Ancillary Services Market (ASM) and Resource-Adequacy requirements, more can be done to enhance opportunities for demand response and the positive impacts it creates for all involved ...


ISO compliant M<sup>2</sup>measurement using a quadriwave lateral shearing interferometer wave front sensor

CLEO: 2013, 2013

We validate the use of a quadriwave lateral shearing Wave Front Sensor (WFS) to make an ISO compliant M2measurement. We compare measurements made following the ISO standard method with those made with the WFS.


More Xplore Articles

Educational Resources on ISO

Back to Top

IEEE.tv Videos

IMS 2011 Microapps - Application Principles for Circulators and Isolators
IEEE PELS Webinar Series-Galvanic Isolation for Power Supply Applications
Multiple Sensor Fault Detection and Isolation in Complex Distributed Dynamical Systems
Panel Discussion: RegionaI Issues and Developments Related to Internet Governance, Cybersecurity and Privacy - ETAP Tel Aviv 2015
Micro-Apps 2013: Rapid Simulation of Large Phased Array T/R Module Networks
Lloyd Watts: Reverse-Engineering the Human Auditory Pathway -WCCI 2012 Plenary talk
Micro-Apps 2013: Optimizing Chip, Module, Board Transitions Using Integrated EM and Circuit Design Simulation Software
Open Systems Architecture for RF and Microwave Technologies: MicroApps 2015 - Mercury Systems
Fully-Integrated Non-Magnetic 180nm SOI Circulator - Aravind Nagulu - RFIC Showcase 2018
Why Engineering Matters for Women
Critical use cases for video capturing systems in autonomous driving applications
26 Years of Risk Management Standardisation - Kevin Knight - Closing Ceremony: Sections Congress 2017
International Future Energy Challenge 2018
Obtaining a US patent with Dr. William Tonti
William J. Miller on Sensei-IoT: 2016 End to End Trust and Security Workshop for the Internet of Things
Nebbiolo Technologies Pitch: Fog Tank - Fog World Congress
Winds of Change: Part 2 - Locating Wind Farms
Navigating the (Mis)Perceptions of Autonomous Vehicles | IEEE TechEthics Public Forum
Fragility of Interconnected Cyber-Physical Systems - Marios M. Polycarpou - WCCI 2016
Self-Driving Buses: Minnesota Pilot Project - IEEE Region 4 Presentation

IEEE-USA E-Books

  • International Laser Standards

    As early as January 1987, the LAA board initiated its involvement with the laser committee of the International Electrotechnical Commission (IEC). In the early 1980s, Germany adopted a standard for the threads on microscope objectives, and proposed that the standard be adopted by the International Organization for Standards. It was the IEC Laser Committee (IEC TC76) that was developing standards for laser eye safety. But there were no standards for the lasers' parameters themselves. In order to implement their?>integrated market,?>the Europeans needed standards - on literally everything - that would facilitate intra-European trade. The LEOMA board was determined not to continue the expensive standards assessment into a fourth year. The board decided to request that the two major laser conferences in the United States - CLEO and OPTCON - add a standards fee to every exhibitor at those conferences. LEOMA was fortunate to find so quickly the path to successful interaction with the European standards organizations.

  • Incorporating short-term stored energy resource into Midwest ISO energy and ancillary service market

    Summary form only given. The purpose of this paper is to analyze various approaches to incorporate short-term stored energy resources into the Midwest ISO co-optimized energy and ancillary service market. Based on the analysis, the best approach is to utilize short-term stored energy resources for regulating reserve with the real-time energy dispatch to be set in such a way that the maximum regulating reserve can be cleared. Results on a five-bus system are used to illustrate the clearing and pricing on short-term stored energy resources with the proposed approach. Monte Carlo simulation on the five-bus system is used to illustrate the AGC regulation deployment.

  • Guidance on physicochemical characterization for manufacture nano-objects submitted for toxicological testing

    This document provides the consensus results by a group of international expert of physicochemical parameters for detailed description of manufactured nano-objects subjected to toxicologic testing. Eight physic-chemical parameters are presented. The full Technical Report will be published shortly by ISO.

  • Demand Response opportunities &amp;amp; challenges for regulated and retail choice footprint

    This paper discusses launch of the energy market in 2005 and the ancillary services market in 2009. Despite the growth in demand resource participation in the Midwest ISO markets since the launch of the Ancillary Services Market (ASM) and Resource-Adequacy requirements, more can be done to enhance opportunities for demand response and the positive impacts it creates for all involved in the wholesale bulk power markets.

  • ISO compliant M<sup>2</sup>measurement using a quadriwave lateral shearing interferometer wave front sensor

    We validate the use of a quadriwave lateral shearing Wave Front Sensor (WFS) to make an ISO compliant M2measurement. We compare measurements made following the ISO standard method with those made with the WFS.

  • ISO New England experience implementing demand response

    Summary form only given. Demand Response has been a part of the ISO New England footprint since before the inception of markets in 1999. During this panel session we will identify what ISO New England issues will need to be solved to fully deploy DR at the wholesale levels. Some of the issues that will be discussed and identified are the following: What are the benefits of previously implemented DR programs· How can Demand Response be most accurately represented in and model within the current wholesale market structure· Can and ISO New England implemented demand-side management process be economically for residential, commercial, and industrial customers· Can DR resources be used to provide operating reserves or regulation· Who does the ISO communicate with DR aggregators or consumers· How do we track reductions as well as potential for reductions· What are the best method to use to perform baseline calculations for DR customers· How does ISO New England pay DR resources· What are the correct market incentives· ISO New England will show how some of these questions have been answered with previous attempts at integrating DR into the markets and what some of the challenges are ahead of us in the future.

  • Curriculum development: Transmission expansion planning for the California ISO system with renewable energy resources

    The California ISO (CAISO) is responsible for planning the transmission system for approximately 80% of the load in California. California has a Renewable Portfolio Standard to serve 33% of its customer load from renewable resources by the year 2020. As such there are several major transmission projects that are under various stages of development to meet this standard. This Panelist will briefly describe a few of these renewable transmission projects that are currently under construction, and the associated planning analysis that was performed. In addition, information on more recent renewable transmission planning efforts at the CAISO will be provided. Observations regarding engineering skills that were required to complete this transmission planning work will be included and will be the main objective of the presentation.

  • One solution of loop invariant code motion compiler optimisation

    This paper describes an approach to solving the loop invariant code motion optimisation problem, encountered problems, made decisions and trade-offs and results of the implementation.

  • A review and comparative evaluation of forensics guidelines of NIST SP 800-101 Rev.1:2014 and ISO/IEC 27037:2012

    In this paper, we present a review and comparative evaluation of forensics guidelines of NIST SP 800-101 Rev.1:2014 and ISO/IEC 27037:2012. This study proposes and analyzes an integrated implementation of these two forensic guidelines. The result of this will provide a forensic investigator with a good understanding of the two forensic standards, and present an opportunity to forensic investigators, organizations and jurisdictions that are compliant in one standard to realize the benefits of the other standard. As it is shown, no single standard addresses all processes of digital forensic investigations. This comparison identifies areas of forensics guidelines covered by each standard, commonalities and differences in the two standards, and their limitations.

  • Towards self-organization of networked medical devices

    Soaring costs and an aging society originate the need for novel technologies in health care sector. Especially telemedicine and AAL systems are often promoted as such. Enabling patients to stay in their domestic environment while reducing costs due to hospital visits seems to be an evaluable opportunity on the one hand but introduces a lot of challenges, like interoperability and security, on the other. Interoperability is the main challenge to put emphasis on, when thinking of networks of medical devices recording patients vital data while acting in a plug-and-play manner. Thus, standards are needed that enable manufacturers to build interoperable medical devices and provide solutions for cost effective and easy to use telemedicine systems. Therefore this paper analyzes the ISO/IEEE11073 PHD standard towards its applicability in such environments, where the focus lies on self- organization and plug-and-play functionality. Furthermore we want to present research done on telemedicine/AAL systems during the SmartSenior project as well as introduce our own ISO/IEEE11073 implementation, which served as a basis for our analysis.



Standards related to ISO

Back to Top

(Replaced) IEEE Standard VHDL Language Reference Manual

his standard revises and enhances the VHDL language reference manual (LRM) by including a standard C language interface specification; specifications from previously separate, but related, standards IEEE Std 1164 -1993,1 IEEE Std 1076.2 -1996, and IEEE Std 1076.3-1997; and general language enhancements in the areas of design and verification of electronic systems.


Health Informatics - Personal Health Device Communication - Part 10441: Device Specialization - Cardiovascular Fitness and Activity Monitor

Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between personal cardiovascular fitness and activity monitoring devices and managers (e.g. cell phones, personal computers, personal health appliances, set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073 ...


Health informatics--Personal health device communication Part 10417: Device specialization- Glucose meter

Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of communication between personal telehealth glucose meter devices and compute engines (e.g. cell phones, personal computers, personal health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards, including ISO/IEEE 11073 terminology, ...


IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications

The project defines a standard for high-speed (>100 Mbps at the physical layer) communication devices via electric power lines, so-called broadband over power line (BPL) devices. This standard uses transmission frequencies below 100 MHz. It is usable by all classes of BPL devices, including BPL devices used for the first-mile/last-mile connection (<1500 m to the premise) to broadband services as ...


IEEE Standard for Conformance to IEEE 802.20 Systems--Protocol Implementation Conformance Statement (PICS) Proforma

This standard represents the PICS Proforma, per ISO/IEC 9646-7 and ITU-T X.296, for the conformance specification of base stations or access nodes, and access terminals or user terminals, based upon the air interface specified in IEEE Std 802.20.


More Standards

Jobs related to ISO

Back to Top