Conferences related to Energy exchange

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


ICC 2021 - IEEE International Conference on Communications

IEEE ICC is one of the two flagship IEEE conferences in the field of communications; Montreal is to host this conference in 2021. Each annual IEEE ICC conference typically attracts approximately 1,500-2,000 attendees, and will present over 1,000 research works over its duration. As well as being an opportunity to share pioneering research ideas and developments, the conference is also an excellent networking and publicity event, giving the opportunity for businesses and clients to link together, and presenting the scope for companies to publicize themselves and their products among the leaders of communications industries from all over the world.


2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


More Conferences

Periodicals related to Energy exchange

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Circuits and Systems, IEEE Transactions on

The Transactions on Biomedical Circuits and Systems addresses areas at the crossroads of Circuits and Systems and Life Sciences. The main emphasis is on microelectronic issues in a wide range of applications found in life sciences, physical sciences and engineering. The primary goal of the journal is to bridge the unique scientific and technical activities of the Circuits and Systems ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Communications Letters, IEEE

Covers topics in the scope of IEEE Transactions on Communications but in the form of very brief publication (maximum of 6column lengths, including all diagrams and tables.)


More Periodicals

Most published Xplore authors for Energy exchange

Back to Top

Xplore Articles related to Energy exchange

Back to Top

Correction

IEEE Power Electronics Magazine, 2016

There was an error in an acronym for the International Workshop on the Future of Electronic Power Processing and Conversion. The correct acronym is FEPPCON.


Pulse Transformers

Foundations of Pulsed Power Technology, None

Pulse transformers can be classified into induction transformers and transmission line transformers. Induction transformers may employ a ferromagnetic core or an air core. The primary and secondary windings can take the configurations of an autotransformer, independent windings, or cascaded transformers. This chapter deals with air core transformers and their behavior under the conditions of double resonance, off resonance, and triple ...


Correction To "Lanthanide-based Resonance Energy Transfer"

IEEE Journal of Selected Topics in Quantum Electronics, 1997

None


Impulse-shunt mode harmonic generation

1966 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1966

None


Achievable performance of acoustic imaging systems

1970 IEEE International Conference on Engineering in the Ocean Environment - Digest of Technical Papers, 1970

Image information content, sonar equations for different target types, and achievable range-resolution performance envelopes are presented. Potential for improved performance and versatility through non linear techniques is explored. Illustrations from experiments are provided.


More Xplore Articles

Educational Resources on Energy exchange

Back to Top

IEEE-USA E-Books

  • Correction

    There was an error in an acronym for the International Workshop on the Future of Electronic Power Processing and Conversion. The correct acronym is FEPPCON.

  • Pulse Transformers

    Pulse transformers can be classified into induction transformers and transmission line transformers. Induction transformers may employ a ferromagnetic core or an air core. The primary and secondary windings can take the configurations of an autotransformer, independent windings, or cascaded transformers. This chapter deals with air core transformers and their behavior under the conditions of double resonance, off resonance, and triple resonance. In contrast to a conventional transformer, which uses iron or ferrite cores, the Tesla transformer employs an air core. Tapered transmission line transformers can be thought of as derivatives of the very well‐known quarter wave transformer. The quarter wave transformer is a simple technique to match any real load impedance to a transmission line, at a fixed frequency, by inserting a resonant section of transmission line between them. The manufacture of large, laminated iron cores in the 1960s allowed the principle of magnetic induction to be developed for charged particle beam applications.

  • Correction To "Lanthanide-based Resonance Energy Transfer"

    None

  • Impulse-shunt mode harmonic generation

    None

  • Achievable performance of acoustic imaging systems

    Image information content, sonar equations for different target types, and achievable range-resolution performance envelopes are presented. Potential for improved performance and versatility through non linear techniques is explored. Illustrations from experiments are provided.

  • FRET-assisted organic dye molecules using in conjunction with colloidal quantum dots for bio-labelling

    The paper presents Forster-type resonance energy transfer (FRET)-mediated light-harvesting of CdSe quantum dots for Atto Rhodamine 12 dye molecules using selective excitation wavelengths and achieved up to 4-fold enhancement of the Atto emission. Organic CdSe quantum dots are synthesized using hot injection method, and are emitting at 584 nm with a quantum yield of 31% that are carefully selected to spectrally match the absorption band of the acceptor dye molecules. It is shown that the strong lifetime modifications of the donor and acceptor molecules is the result of light-harvesting FRET, which will be important for bio-labelling.

  • "Noncontact" pumping of semiconductor nanocrystals via nonradiative energy transfer from a proximal quantum well

    We demonstrate a novel, nanocrystal (NC)-based LED, in which the emission color is tuned by varying the NC size. The NCs are pumped "noncontactly" via nonradiative energy transfer from a proximal quantum well

  • Design and Analysis of A Class-E Frequency-Controlled Transcutaneous Energy Transfer System

    This article introduces a frequency-controlled transcutaneous energy transfer system as well as a particular circuit structure for it. The analysis method, design and realization of this system are studied and its performance evaluation based on the simulations and experimental results of a prototype circuit is carried out. The simplicity of the required hardware as well as the high performance and reliability are among the attractive features of the proposed system.

  • Extended summary: Nanoscale management of electron-phonon energy transfer

    Understanding of nanoscale energy transfer and transformations is of fundamental importance to a variety of technologies, such as chip packaging and energy conversion. Nanostructured materials provide scientists and engineers with many possibilities to manipulate energy transfer and its conversion into various forms. Currently, nanoscale management of energy- related transport and kinetics is mainly associated with engineering of phonons, because these energy carriers have characteristic wavelengths in the nanoscale range.

  • The Effect of Calcium Co-Doping on Praseodymium Doped LSO

    Cerium-doped lutetium oxyorthosilicate (LSO:Ce) is a well-known scintillator whose high density (7.4 g/cc), high light yield ( ~ 6 times that of BGO), and fast decay time ( ~ 43 ns) make it especially well suited for use in Positron Emission Tomography. Recent work suggests that divalent calcium co-doping eliminates many of the shallow electron traps, thus facilitating fast energy transfer to the Ce<sup>3+</sup> luminescence centers and shortening the scintillation decay time to ~ 30 ns. Here we report preliminary observations of the effect of Ca<sup>2+</sup> co-doping on the crystal growth, photoluminescence, and scintillation properties of LSO:Pr. Single crystals with Pr concentrations ranging from 0.05% to 0.2% and Ca<sup>2+</sup> concentrations up to 0.2% were grown via the Czochralski technique. Absorption, emission, and excitation spectra revealed the numerous 5d-4f and 4f-4f transitions characteristic of trivalent Pr. The main optical absorption due to Ca<sup>2+</sup> occurs in the far UV, similar to previous observations of LSO:Ce, but with a more intense tail extending through the visible region. Consequently, 4f to 5d optical excitation ( ~ 260 nm) is greatly reduced in Ca co-doped samples, and the related 5d to 4f emission ( ~ 400 nm) is largely absent. Optical excitation ( ~ 450-500 nm) of the red ( ~ 610 nm) emission appears to be unaffected, for the most part, by the presence of Ca<sup>2+</sup>. The scintillation decay of LSO:Pr is the sum of two exponential components with time constants of 7-8 and 26-29 ns, similar to previous reports. The addition of Ca<sup>2+</sup> appears to relatively enhance the shorter component while reducing the longer one, although one or more additional slow components appear.




Jobs related to Energy exchange

Back to Top