Electrostatic induction

View this topic in
Electrostatic induction is a redistribution of electrical charge in an object, caused by the influence of nearby charges. (Wikipedia.org)






Conferences related to Electrostatic induction

Back to Top

2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.


More Conferences

Periodicals related to Electrostatic induction

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Circuits and Systems II: Express Briefs, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


Dielectrics and Electrical Insulation, IEEE Transactions on

Electrical insulation common to the design and construction of components and equipment for use in electric and electronic circuits and distribution systems at all frequencies.


Education, IEEE Transactions on

Educational methods, technology, and programs; history of technology; impact of evolving research on education.


Electrical Insulation Magazine, IEEE

The magazine covers theory, analysis, design (computer-aided design), and practical implementation of circuits, and the application of circuit theoretic techniques to systems and to signal processing. Content is written for the spectrum of activities from basic scientific theory to industrial applications.


More Periodicals

Most published Xplore authors for Electrostatic induction

Back to Top

Xplore Articles related to Electrostatic induction

Back to Top

Influence of electrostatic induction electrode configuration on water mist charging

2011 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2011

Electrostatic atomization is the application of electric charge to produce fine drop from a liquid. It is said that electrostatic induction charging effects water mist charging by some parameter such as configuration of ring induction electrode, water pressure and applied voltage but still well unknown. So, to make it more clear, this research is done and focusing on configuration of ...


Transient Electrostatic Induction by EHV Transmission Lines

IEEE Transactions on Power Apparatus and Systems, 1969

Transient electrostatic induction by EHV lines on objects such as large vehicles is studied. Attention is drawn to the need of further investigation with regard to hazards to persons touching the object and being submitted to current pulses of very short duration. An analytical expression for the electrostatically induced voltage wave is derived. The calculated numerical values are checked experimentally ...


Burning of Wooden Pins on High-Tension Transmission Lines

Transactions of the American Institute of Electrical Engineers, 1903

Facts concerning a number of examples of the burning of wooden insulators pins and a recommendation as to the use of iron pins.


Research on electrostatic interference of double spherical electrodes

2009 3rd IEEE International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications, 2009

The interference between electrodes is an important element which can influence the optimum result of the electrostatic detecting array. Thus, it must be researched and quantified. Based on the electrostatic detecting model of the single spherical electrode, the interference model of double spherical electrodes is built and analyzed by the charge mirror method. The electrostatic induction principle of double spherical ...


Inphase Currents and Losses in Multiconductor Cables

2008 12th IEEE Workshop on Signal Propagation on Interconnects, 2008

Using the rigorous method for calculating the parameters of two-wire lines (twisted pairs) surrounded by a single metal shield, it is shown that inphase currents (common wave) in the lines are caused by the asymmetry of excitation and loads. The effect produced by the loads placed between the wires and the shield is considered. The proposed method allows generalization of ...


More Xplore Articles

Educational Resources on Electrostatic induction

Back to Top

IEEE-USA E-Books

  • Influence of electrostatic induction electrode configuration on water mist charging

    Electrostatic atomization is the application of electric charge to produce fine drop from a liquid. It is said that electrostatic induction charging effects water mist charging by some parameter such as configuration of ring induction electrode, water pressure and applied voltage but still well unknown. So, to make it more clear, this research is done and focusing on configuration of ring induction electrode in water mist charging. In this study, a mechanism is proposed and mist nozzle is used to produce water mist. Variables of ring electrode diameter and its distance from the mist nozzle are examined as configuration of the ring induction electrode. When the water mist came out from the mist nozzle and went through the ring induction electrode, it will inducted by the applied voltage. Faraday cup is placed under the nozzle to collect the charged water mist. To determine the charge-to-mass of water mist, currents at ring induction electrode and faraday cup are measured. As a result, it is understood that the separation region and high charge-to- mass of water mist can be found on certain configuration of ring induction electrode. Besides, charge-to-mass quantity is higher in positive applied voltage rather than negative applied voltage.

  • Transient Electrostatic Induction by EHV Transmission Lines

    Transient electrostatic induction by EHV lines on objects such as large vehicles is studied. Attention is drawn to the need of further investigation with regard to hazards to persons touching the object and being submitted to current pulses of very short duration. An analytical expression for the electrostatically induced voltage wave is derived. The calculated numerical values are checked experimentally on the air model and the results show good agreement.

  • Burning of Wooden Pins on High-Tension Transmission Lines

    Facts concerning a number of examples of the burning of wooden insulators pins and a recommendation as to the use of iron pins.

  • Research on electrostatic interference of double spherical electrodes

    The interference between electrodes is an important element which can influence the optimum result of the electrostatic detecting array. Thus, it must be researched and quantified. Based on the electrostatic detecting model of the single spherical electrode, the interference model of double spherical electrodes is built and analyzed by the charge mirror method. The electrostatic induction principle of double spherical electrodes is deduced. Based on practical application, the functions of the principle are simplified. With the results of simulation, the necessity of establishing the interference model is proved; meanwhile the electrostatic induction principle of double spherical electrodes and its simplified form are verified to be accurate.

  • Inphase Currents and Losses in Multiconductor Cables

    Using the rigorous method for calculating the parameters of two-wire lines (twisted pairs) surrounded by a single metal shield, it is shown that inphase currents (common wave) in the lines are caused by the asymmetry of excitation and loads. The effect produced by the loads placed between the wires and the shield is considered. The proposed method allows generalization of the obtained results to the case of lossy multiconductor cables.

  • Study on the Method of Surveying Wiring Path

    This study proposes a novel cable detection method to survey the electrical wiring in buildings and factories comprising several equipment with numerous cable connections. The wiring is implemented usually in conduits concealed inside the walls and beneath the floors to a massive extent with the cables of different types laid for hundreds of meters. Prior to the removal of a defective cable in a repair work, it is necessary to identify it correctly. A cable locator is used for the identification of a cable in a complex wiring system without damaging the healthy cables erroneously so that a circuit breaker would not trip due to a cable fault eventually. Cable locators are commercially available in the market and the detection method is classified into two types: electromagnetic induction and electrostatic induction. In this study, a suitable detection method is developed and demonstrated, and different types of cable locator are evaluated.

  • Physical activity estimation method by using wireless portable sensor

    In this study, an effective noncontact technique for the detection of human physical activity is proposed. The technique is based on detecting the electrostatic induction current generated by the walking motion under non- contact and non-attached conditions. A theoretical model for the electrostatic induction current generated because of a change in the electric potential of the human body is proposed. By comparing the obtained electrostatic induction current with the theoretical model, it becomes obvious that this model effectively explains the behavior of the waveform of the electrostatic induction current. The normal walking motions of daily living are recorded using a portable sensor measurement located in an ordinary house. The obtained results show that detailed information regarding physical activity such as a walking cycle can be estimated using our proposed technique. Additionally, the walking signal is measured when the subject walked with the ankle and knee of the foot fastened to a splint with bandages. This suggests that the proposed technique, which is based on the detection of the walking signal, can be successfully applied to the estimation of the quality of human walking motion.

  • Closed Orbit Correction in the AGS

    None

  • Calculation on induced over-voltage on low-voltage overhead lines

    There are always very tall buildings next to the low-voltage transmission lines through the city centers. If the buildings are stroke directly by lightning, the extremely high transient electromagnetic field caused by lightning current through the lightning downward lead might induce high over- voltages on the low-voltage transmission lines. If the induced lightning over- voltage exceeds the withstanding ability of the insulators, lines will flashover to the cross arm of the tower. In this paper , the equation used to calculate the induced over-voltage on the low-voltage overhead transmission lines less than 65m far away from the lightning stroke point is deduced and the sensitivity studies are carried out to indicate how the parameters would influence induced over-voltage.

  • Novel vibration-driven micro-electrostatic induction energy harvester with asymmetric multi-resonant spring

    We developed an asymmetric gammadion spring electrode for wide band vibration as a counter electrode for the electret electrode film of a micro electrostatic energy harvester. A vibration-driven micro power generator with a high-Q mechanical resonator works efficiently under single-frequency vibration, but, the associated narrow operation frequency bandwidth tightly limits the power output under normal wideband vibrations. To solve this problem, we therefore present concept, design, simulation, fabrication, and evaluation of our novel micro generator based on electrostatic induction using electret. The asymmetric gammadion spring is made of stacked SU-8 and has three vibration modes. For mode 1 vibration the maximum power output our generator was 7.48 nW at 110 Hz, for mode 2 vibration it was 2.19 nW at 165 Hz, and for mode 3 it was 1.72 nW at 243 Hz.



Standards related to Electrostatic induction

Back to Top

No standards are currently tagged "Electrostatic induction"


Jobs related to Electrostatic induction

Back to Top