Conferences related to Electronic ballasts

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2021 IEEE Pulsed Power Conference (PPC)

The Pulsed Power Conference is held on a biannual basis and serves as the principal forum forthe exchange of information on pulsed power technology and engineering.


2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


More Conferences

Periodicals related to Electronic ballasts

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Computer

Computer, the flagship publication of the IEEE Computer Society, publishes peer-reviewed technical content that covers all aspects of computer science, computer engineering, technology, and applications. Computer is a resource that practitioners, researchers, and managers can rely on to provide timely information about current research developments, trends, best practices, and changes in the profession.


Device and Materials Reliability, IEEE Transactions on

Provides leading edge information that is critical to the creation of reliable electronic devices and materials, and a focus for interdisciplinary communication in the state of the art of reliability of electronic devices, and the materials used in their manufacture. It focuses on the reliability of electronic, optical, and magnetic devices, and microsystems; the materials and processes used in the ...


Display Technology, Journal of

This publication covers the theory, design, fabrication, manufacturing and application of information displays and aspects of display technology that emphasize the progress in device engineering, device design, materials, electronics, physics and reliabilityaspects of displays and the application of displays.


More Periodicals

Most published Xplore authors for Electronic ballasts

Back to Top

Xplore Articles related to Electronic ballasts

Back to Top

Controlling secondary breakdown of bipolar power transistors

1981 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1981

An active ballasting technique used to fabricate an oxide passivated power transistor with f<inf>T</inf>of 50MHz and capable of continuously dissipating 250W with collector voltages above 200V will be reported. Saturation voltage at 10A is under 1V.


Correction

IEEE Industrial Electronics Magazine, 2009

None


Practical Design of An LED Light Bulb

Practical Lighting Design with LEDs, None

To make the light bulb brighter, the light emitting diodes (LEDs) are also going to have to run hotter. And hotter LEDs means the mean time to failure (MTTF) is going to be less. There are going to be two sources of heat in the LED light bulb design, the ballast and the LEDs. This chapter draws a specification, for ...


Track-circuit signaling on electrified roads

Proceedings of the American Institute of Electrical Engineers, 1907

Railroads signals may be divided into three general classes according to their functions: (a) Those which confer rights on trains, or restrict their rights, known as train-order signals; (b) Those which designate the route a train is to take, and insure the safe condition of all switches and opposing signals on such route known as interlocking signals; (c) Those which ...


Practical operation of suspension insulators

Proceedings of the American Institute of Electrical Engineers, 1914

The paper describes some of the mechanical and electrical problems which have been experienced on high-voltage transmission lines equipped with suspension insulators and points out some of the principles involved and some practical methods for guarding against the troubles. Figures are given showing the deflections which will take place for various sizes of aluminum and copper conductors at the insulators, ...


More Xplore Articles

Educational Resources on Electronic ballasts

Back to Top

IEEE-USA E-Books

  • Controlling secondary breakdown of bipolar power transistors

    An active ballasting technique used to fabricate an oxide passivated power transistor with f<inf>T</inf>of 50MHz and capable of continuously dissipating 250W with collector voltages above 200V will be reported. Saturation voltage at 10A is under 1V.

  • Correction

    None

  • Practical Design of An LED Light Bulb

    To make the light bulb brighter, the light emitting diodes (LEDs) are also going to have to run hotter. And hotter LEDs means the mean time to failure (MTTF) is going to be less. There are going to be two sources of heat in the LED light bulb design, the ballast and the LEDs. This chapter draws a specification, for marketing sign‐off before the design begins. There are a number of issues that are indirectly addressed in this specification. The chapter talks about total harmonic distortion (THD). While THD has long been familiar to those interested in audio, it is relatively new in the world of power conversion. The chapter provides a summary in words of how the two measures, Flicker Index (FI) and Percent Flicker (%F), are calculated. FI first finds the average light output. The chapter then finds how much of the total light is emitted above that average. % F measures the difference between the brightest light emitted and the dimmest light.

  • Track-circuit signaling on electrified roads

    Railroads signals may be divided into three general classes according to their functions: (a) Those which confer rights on trains, or restrict their rights, known as train-order signals; (b) Those which designate the route a train is to take, and insure the safe condition of all switches and opposing signals on such route known as interlocking signals; (c) Those which are used primarily for properly spacing trains, known as block signals.

  • Practical operation of suspension insulators

    The paper describes some of the mechanical and electrical problems which have been experienced on high-voltage transmission lines equipped with suspension insulators and points out some of the principles involved and some practical methods for guarding against the troubles. Figures are given showing the deflections which will take place for various sizes of aluminum and copper conductors at the insulators, under the pressure of maximum probable wind velocity.

  • Ballast &amp;amp; lighting

    None

  • Voltage Fluctuations in Lamps and Ballasts

    This article shows that lamp aging has a significant correlation with flicker generation. In this research work, a test system and a methodology able to measure optical fluctuation produced by different types of lamps and ballast are presented. This experimental platform provides a correlation between voltage flicker levels and optical flicker perception. This platform can be considered as a first step in the definition of new lamp models. The limits of the severity of flicker caused by voltage fluctuations are defined in Europe by the standard CENELEC EN 50160.

  • The transparent hull submersible makakai

    The transparent hull submersible MAKAKAI has been constructed by the Hawaii Laboratory of Naval Undersea Research and Development Center. Unique features of the submersible are its 66-inch O.D. transparent acrylic pressure hull, its pi-itch cycloidal propulsion system, its environmental cooling system, and its control information transmission systems. The vehicle has an operating depth of 600 feet. Its overall mission goals are to provide a submersible developmental test and demonstration platform for undersea hardware and a working vehicle for scientific personnel.

  • Light electric railways

    Although the building of interurban electric railways has been carried on very actively in the Central States during the last six years, a general survey of the situation shows that the territory served by such roads is rather limited, especially in states west of Indiana. The typical interurban electric railway of the Central States costs from $20 000 to $25 000 per mile of single track. The building of such roads has therefore been generally confined to such places as in the opinion of the builders have sufficient population and resources to yield an annual gross revenue which will leave from $1200 to $1500 per track mile to pay interest on the investment after paying operating expenses, maintenance, and depreciation. Without going into details, it can be said in a general way that a gross revenue of $3000 to $4000 per track mile per year must be earned at the start on a most economically constructed interurban road of the ordinary type, if it is to be a financial success.

  • Fluorescent lighting after two years

    After two years in service, the fluorescent lamp has definitely established itself as a new tool for the illumination engineer that will supplement, but not supplant, other light sources NEW in theory, design, and appearance, the fluorescent lamp was introduced some two years ago to the public and the illuminating-engineering profession at almost the same instant, giving the latter little time to study and prepare essential data before the former began to insist upon its application to every lighting field. The past two years, therefore, have been a period of catching up — of constant improvement in the lamp and its auxiliary equipment, and of rapid assembling of data on its performance and its limitations as a practical and economical light source.




Jobs related to Electronic ballasts

Back to Top