Conferences related to Electric current control

Back to Top

2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 IEEE 16th International Workshop on Advanced Motion Control (AMC)

AMC2020 is the 16th in a series of biennial international workshops on Advanced Motion Control which aims to bring together researchers from both academia and industry and to promote omnipresent motion control technologies and applications.


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


2020 IEEE IAS Petroleum and Chemical Industry Committee (PCIC)

The PCIC provides an international forum for the exchange of electrical applications technology related to the petroleum and chemical industry. The PCIC annual conference is rotated across North American locations of industry strength to attract national and international participation. User, manufacturer, consultant, and contractor participation is encouraged to strengthen the conference technical base. Success of the PCIC is built upon high quality papers, individual recognition, valued standards activities, mentoring, tutorials, networking and conference sites that appeal to all.


More Conferences

Periodicals related to Electric current control

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Circuits and Systems, IEEE Transactions on

The Transactions on Biomedical Circuits and Systems addresses areas at the crossroads of Circuits and Systems and Life Sciences. The main emphasis is on microelectronic issues in a wide range of applications found in life sciences, physical sciences and engineering. The primary goal of the journal is to bridge the unique scientific and technical activities of the Circuits and Systems ...


More Periodicals

Most published Xplore authors for Electric current control

Back to Top

Xplore Articles related to Electric current control

Back to Top

IEEE Draft Test Methods for Self-Restoring Current Limiter Components used in Telecommunication Surge Protectors

IEEE PC62.39/D2A, June 2012, 2012

This standard gives the basic requirements to be met by series connected, solid-state, self-restoring overcurrent protectors (OCPs) for the protection of telecommunication equipment and lines. This standard should be used for the harmonization of existing or future specifications issued by solid-state, self-restoring overcurrent protector manufacturers, telecommunication equipment manufacturers, administrations or network operators.


Errata

IEEE Transactions on Industrial Electronics, 1987

None


Online Torque Estimator of Switched Reluctance Motor Running under Hysteresis Current Control

2006 12th Biennial IEEE Conference on Electromagnetic Field Computation, 2006

An online torque estimator for switched reluctance motor operating under hysteresis current control is proposed. It requires very little pre-measured machine data. Most parameters are estimated on-line, in real-time, using rotor position, motor phase currents and voltages. Comparison between the outputs of the estimator and cubic spline model shows satisfactory results


Comparison of current control techniques for active filter applications

IEEE Transactions on Industrial Electronics, 1998

This paper presents the comparative evaluation of the performance of three state-of-the-art current control techniques for active filters. The linear rotating frame current controller, the fixed-frequency hysteresis controller, and the digital deadbeat controller are considered. The main control innovations, determined by industrial applications, are presented, suitable criteria for the comparison are identified, and the differences in the performance of the ...


Enhanced current control of high-speed PM machine drives through the use of flux controllers

IEEE Transactions on Industry Applications, 1999

This paper compares various types of current controllers, including a novel method based on flux control. A proportional integral (PI) control method is used initially, to control the current in a high-speed permanent-magnet synchronous machine. The performance of this simple PI loop is presented, Various improvements to the PI controller are investigated, and the change in performance examined. A new ...


More Xplore Articles

Educational Resources on Electric current control

Back to Top

IEEE-USA E-Books

  • IEEE Draft Test Methods for Self-Restoring Current Limiter Components used in Telecommunication Surge Protectors

    This standard gives the basic requirements to be met by series connected, solid-state, self-restoring overcurrent protectors (OCPs) for the protection of telecommunication equipment and lines. This standard should be used for the harmonization of existing or future specifications issued by solid-state, self-restoring overcurrent protector manufacturers, telecommunication equipment manufacturers, administrations or network operators.

  • Errata

    None

  • Online Torque Estimator of Switched Reluctance Motor Running under Hysteresis Current Control

    An online torque estimator for switched reluctance motor operating under hysteresis current control is proposed. It requires very little pre-measured machine data. Most parameters are estimated on-line, in real-time, using rotor position, motor phase currents and voltages. Comparison between the outputs of the estimator and cubic spline model shows satisfactory results

  • Comparison of current control techniques for active filter applications

    This paper presents the comparative evaluation of the performance of three state-of-the-art current control techniques for active filters. The linear rotating frame current controller, the fixed-frequency hysteresis controller, and the digital deadbeat controller are considered. The main control innovations, determined by industrial applications, are presented, suitable criteria for the comparison are identified, and the differences in the performance of the three controllers in a typical parallel active filter setup are investigated by simulations.

  • Enhanced current control of high-speed PM machine drives through the use of flux controllers

    This paper compares various types of current controllers, including a novel method based on flux control. A proportional integral (PI) control method is used initially, to control the current in a high-speed permanent-magnet synchronous machine. The performance of this simple PI loop is presented, Various improvements to the PI controller are investigated, and the change in performance examined. A new current control scheme based on a flux-linkage model of the machine is introduced. The performance of the model-based control is demonstrated and compared with the performance of the PI current controller. Factors affecting the accuracy of the model-based control are given. By incorporating these factors into the model, the performance of the flux controller is further enhanced.

  • Driving method to improve display quality as current control with external circuitry

    Image quality of FED (Field Emission Display) depends on uniformity of each pixel quality, because current FEDs have a passive matrix structure. If a pixel has a leakage path between gate and cathode, this affects neighboring pixels. The panel is activated by general flat panel driving scheme (push-pull method), image distortion such as a dark line pattern is observed according to the driving method. In this paper, this is simulated and cured by a new driving method for better image quality. The results from simulation and experiment are compared.

  • Thin film head characteristics studied by inductance change from bias current control

    None

  • Influence of digital current control strategy on the sensitivity to electrical parameter uncertainties of induction motor indirect field-oriented control

    In indirect field-oriented control schemes, the current control strategy influences strongly the flux control sensitivity to electrical parameter uncertainties. This influence is shown in this paper with the help of a theoretical sensitivity analysis taking into account the saturation effect and considering different digital current control strategies. The performance obtained with a classical proportional-integral (PI) current controller is compared with the performance obtained with a novel current controller associating a feedforward action and a proportional feedback (called PFF controller). A control strategy without current measurement is also considered as a particular case of the PFF controller. It is shown that the flux control sensitivity is generally smaller when the currents are controlled by PFF controllers than by PI controllers. The theoretical study is completed by experiments on a 750 W induction motor (using a digital signal processor (DSP) TMS320C31) which confirm the theoretical results.

  • On considering magnetic saturation with maximum torque to current control in interior permanent magnet synchronous motor drives

    Summary form only given as follows. The influence of magnetic saturation on maximum torque to current controlled interior permanent magnet synchronous motor drives is discussed in this paper. A maximum torque to current condition that takes into account magnetic saturation and determines the optimal d-axis current is derived. For the implementation of the proposed controller, an experimental procedure is used to adjust its parameters, therefore, the knowledge of the exact motor model is not required. Selected experimental results are presented to verify the theoretical considerations and to confirm the high performance of the suggested controller.

  • Fuzzy-tuning current-vector control of a three-phase PWM inverter for high-performance AC drives

    This paper proposes a new discrete fuzzy-tuning current-vector control (FTC) scheme for three-phase pulsewidth modulation (PWM) inverters. The proposed current control scheme can achieve fast transient responses and, at the same time, have very low total harmonic distortion in output current during steady- state operation. The proposed FTC scheme generates quasi-optimum PWM patterns by using a closed-loop control technique with instantaneous current feedback. The proposed FTC scheme has been realized using a single-chip digital signal processor (TMS320C14) from Texas Instruments. Experimental results are given to verify the proposed fuzzy-tuning current control strategy for three-phase PWM inverters.



Standards related to Electric current control

Back to Top

IEEE Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating Stations


IEEE Standard for Safety Levels With Respect to Human Exposure to Electromagnetic Fields, 0-3 kHz

Develop safety levels for human exposure to electromagnetic fields from 0 to 3kHz. This standard will be based on the results of an evaluation of the relevant scientific literature and proven effects which are well established and for which thresholds of reaction are understood. Field limits will be derived from threshold current densities or internal electric fields.


IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz

Recommendations are made to protect against established adverse health effects in human beings associated with exposure to electric, magnetic and electromagnetic fields in the frequency range of 3 kHz to 300 GHz. The recommendations are expressed in terms of basic restrictions (BRs) and maximum permissible exposure (MPE) values. The BRs are limits on internal fields, specific absorption rate (SAR), and ...


Standard Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

This standard specifies design tests for relays and relay systems that relate to the immunity of this equipment to repetitive electrical transients. Two types of tests are specified. The oscillatory and fast transient SWC tests are defined as distinct tests. However, it is not intended to prohibit a combined test, provided all requirements of the individual SWC tests are met. ...



Jobs related to Electric current control

Back to Top