Conferences related to EMP radiation effects

Back to Top

2021 IEEE/MTT-S International Microwave Symposium - IMS 2021

The IEEE MTT-S International Microwave Symposium (IMS) is the premier conference covering basic technologies, to passives and actives components to system over a wide range of frequencies including VHF, UHF, RF, microwave, millimeter-wave, terahertz, and optical. The conference will encompass the latest in RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation, wireless systems, RFID and related topics.

  • 2029 IEEE/MTT-S International Microwave Symposium - IMS 2029

    The IEEE International Microwave Symposium (IMS) is the world s foremost conference covering the UHF, RF, wireless, microwave, millimeter-wave, terahertz, and optical frequencies; encompassing everything from basic technologies to components to systems including the latest RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation and more. The IMS includes technical and interactive sessions, exhibits, student competitions, panels, workshops, tutorials, and networking events.

  • 2019 IEEE/MTT-S International Microwave Symposium - IMS 2019

    Comprehensive symposium on microwave theory and techniques including active and passive circuit components, theory and microwave systems.

  • 2018 IEEE/MTT-S International Microwave Symposium - IMS 2018

    Microwave theory and techniques, RF/microwave/millimeter-wave/terahertz circuit design and fabrication technology, radio/wireless communication.

  • 2017 IEEE/MTT-S International Microwave Symposium - IMS 2017

    The IEEE MTT-S International Microwave Symposium (IMS) is the premier conference covering basic technologies, to passives and actives components to system over a wide range of frequencies including VHF, UHF, RF, microwave, millimeter-wave, terahertz, and optical. The conference will encompass the latest in RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation, wireless systems, RFID and related topics.

  • 2016 IEEE/MTT-S International Microwave Symposium - IMS 2016

    The IEEE International Microwave Symposium (IMS) is the world s foremost conference covering the UHF, RF, wireless, microwave, millimeter-wave, terahertz, and optical frequencies; encompassing everything from basic technologies to components to systems including the latest RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation and more. The IMS includes technical and interactive sessions, exhibits, student competitions, panels, workshops, tutorials, and networking events.

  • 2015 IEEE/MTT-S International Microwave Symposium - MTT 2015

    The IEEE MTT-S International Microwave Symposium (IMS) is the premier conference covering basic technologies, to passives and actives components to system over a wide range of frequencies including VHF, UHF, RF, microwave, millimeter-wave, terahertz, and optical. The conference will encompass the latest in RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation, wireless systems, RFID and related topics. The IMS includes technical sessions, both oral and interactive, worksh

  • 2014 IEEE/MTT-S International Microwave Symposium - MTT 2014

    IMS2014 will cover developments in microwave technology from nano devices to system applications. Technical paper sessions, interactive forums, plenary and panel sessions, workshops, short courses, industrial exhibits, and a wide array of other technical activities will be offered.

  • 2013 IEEE/MTT-S International Microwave Symposium - MTT 2013

    The IEEE MTT-S International Microwave Symposium (IMS) is the premier conference covering basic technologies, to passives and actives components to system over a wide range of frequencies including VHF, UHF, RF, microwave, millimeter -wave, terahertz, and optical. The conference will encompass the latest in RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation, wireless systems, RFID and related topics.The IMS includes technical and interactive sessions, exhibits, student competitions, panels, workshops, tutorials, and networking events.

  • 2012 IEEE/MTT-S International Microwave Symposium - MTT 2012

    The IEEE International Microwave Symposium (IMS) is the world s foremost conference covering the UHF, RF, wireless, microwave, millimeter-wave, terahertz, and optical frequencies; encompassing everything from basic technologies to components to systems including the latest RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation and more. The IMS includes technical and interactive sessions, exhibits, student competitions, panels, workshops, tutorials, and networking events.

  • 2011 IEEE/MTT-S International Microwave Symposium - MTT 2011

    The IEEE International Microwave Symposium (IMS) is the world s foremost conference covering the UHF, RF, wireless, microwave, millimeter-wave, terahertz, and optical frequencies; encompassing everything from basic technologies to components to systems including the latest RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation and more. The IMS includes technical and interactive sessions, exhibits, student competitions, panels, workshops, tutorials, and networking events.

  • 2010 IEEE/MTT-S International Microwave Symposium - MTT 2010

    Reports of research and development at the state-of-the-art of the theory and techniques related to the technology and applications of devices, components, circuits, modules and systems in the RF, microwave, millimeter-wave, submillimeter-wave and Terahertz ranges of the electromagnetic spectrum.

  • 2009 IEEE/MTT-S International Microwave Symposium - MTT 2009

    The IEEE International Microwave Symposium (IMS) is the world s foremost conference covering the UHF, RF, wireless, microwave, millimeter-wave, terahertz, and optical frequencies; encompassing everything from basic technologies to components to systems including the latest RFIC, MIC, MEMS and filter technologies, advances in CAD, modeling, EM simulation and more. The IMS includes technical and interactive sessions, exhibits, student competitions, panels, workshops, tutorials, and networking events.

  • 2008 IEEE/MTT-S International Microwave Symposium - MTT 2008

  • 2007 IEEE/MTT-S International Microwave Symposium - MTT 2007

  • 2006 IEEE/MTT-S International Microwave Symposium - MTT 2006


2021 IEEE Pulsed Power Conference (PPC)

The Pulsed Power Conference is held on a biannual basis and serves as the principal forum forthe exchange of information on pulsed power technology and engineering.


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE International Conference on Image Processing (ICIP)

The International Conference on Image Processing (ICIP), sponsored by the IEEE SignalProcessing Society, is the premier forum for the presentation of technological advances andresearch results in the fields of theoretical, experimental, and applied image and videoprocessing. ICIP 2020, the 27th in the series that has been held annually since 1994, bringstogether leading engineers and scientists in image and video processing from around the world.


More Conferences

Periodicals related to EMP radiation effects

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Communications, IEEE Transactions on

Telephone, telegraphy, facsimile, and point-to-point television, by electromagnetic propagation, including radio; wire; aerial, underground, coaxial, and submarine cables; waveguides, communication satellites, and lasers; in marine, aeronautical, space and fixed station services; repeaters, radio relaying, signal storage, and regeneration; telecommunication error detection and correction; multiplexing and carrier techniques; communication switching systems; data communications; and communication theory. In addition to the above, ...


More Periodicals

Most published Xplore authors for EMP radiation effects

Back to Top

Xplore Articles related to EMP radiation effects

Back to Top

Technology '88: the specialities [electrical engineering]

IEEE Spectrum, 1988

Key developments in some of the more specialized and esoteric branches of electrical engineering during 1987 are summarized. These are the fabrication of error control and data compression chips; the deficiencies in electromagnetic compatibility education; neural learning network model developed; and pulse encoding for optical-fiber telecommunications systems.<<ETX>>


Dynamic load influences on pulse formation for electromagnetic and electrothermal launchers

IEEE Conference Record - Abstracts. 1992 IEEE International Conference on Plasma, 1993

None


The future battlefield: a blast of gigawatts? [microwave-based weapons]

IEEE Spectrum, 1988

The growing interest in the military potential of high-power microwaves is discussed. The effect of such radiation on hardware is examined. Limits on beam intensity are identified, and methods for generating the beam are described. Biological effects of microwaves and the potential use against troops are discussed. The practicality of microwave-based weapons is assessed with regard to cost and military ...


Eighth International Conference on Electromagnetic Compatibility (Conf. Publ. No.362)

Eighth International Conference on Electromagnetic Compatibility, 1992., 1992

None


Research on HEMP injection and radiation effect effect of EED

2009 5th Asia-Pacific Conference on Environmental Electromagnetics, 2009

High-altitude nuclear electromagnetic pulse (HEMP) will lead to EED misoperation (such as early burst) or degradation of the performance and reliability (such as failure) etc. This paper is mainly about injection effect test and radiation effect test of high-altitude EMP on EED, tests are performed in typical HEMP environments. On this basis, researched and analyzed HEMP effect on EED. Analysis ...


More Xplore Articles

Educational Resources on EMP radiation effects

Back to Top

IEEE-USA E-Books

  • Technology '88: the specialities [electrical engineering]

    Key developments in some of the more specialized and esoteric branches of electrical engineering during 1987 are summarized. These are the fabrication of error control and data compression chips; the deficiencies in electromagnetic compatibility education; neural learning network model developed; and pulse encoding for optical-fiber telecommunications systems.<<ETX>>

  • Dynamic load influences on pulse formation for electromagnetic and electrothermal launchers

    None

  • The future battlefield: a blast of gigawatts? [microwave-based weapons]

    The growing interest in the military potential of high-power microwaves is discussed. The effect of such radiation on hardware is examined. Limits on beam intensity are identified, and methods for generating the beam are described. Biological effects of microwaves and the potential use against troops are discussed. The practicality of microwave-based weapons is assessed with regard to cost and military effectiveness.<<ETX>>

  • Eighth International Conference on Electromagnetic Compatibility (Conf. Publ. No.362)

    None

  • Research on HEMP injection and radiation effect effect of EED

    High-altitude nuclear electromagnetic pulse (HEMP) will lead to EED misoperation (such as early burst) or degradation of the performance and reliability (such as failure) etc. This paper is mainly about injection effect test and radiation effect test of high-altitude EMP on EED, tests are performed in typical HEMP environments. On this basis, researched and analyzed HEMP effect on EED. Analysis showed that ignition energy of HEMP on EED is related with the DC ignition sensitivity of EED; the more insensitive EED is, the bigger ignition energy is. EED is seriously affected, in HEMP environment that is the rise time is getting shorter.

  • Short Pulse Transient Radiation Effects on a 92 K-Bit Magnetic Bubble Memory System

    Short-pulse transient radiation experiments were performed on a commercial (Texas Instruments TIB-0203) 92 K-bit magnetic bubble memory system. To test the bubble memory in actual operation, it was convenient to employ a TM 990/100 M-3 MNOS microcomputer system. Because of the low failure threshold that was experienced by this microcomputer (γF = 5×106 rads(Si)/sec), it was shielded during most of the test series. The BCA 0200A controller board was similarly shielded because of associated volatility of the data stored in the memory system at radiation levels above 3×107 rads(Si)/sec. With only the BKA 0203A bubble board exposed, the stored data survived 108 rads(Si)sec during read and write cycling. Radiation exposures above this level often produced errors during data cycling, but since facility-produced EMP and noise increased as the irradiation levels went up, precise failure mechanisms could not be isolated. During power-down, stored data survived 4×1010 rads(Si)/sec, the highest level that could be obtained from the facility in the test configuration employed. The conclusion that may be drawn from the tests is that when shielded or hardened electronics is used with the 92 K-bit magnetic bubble chip, data will be protected up to levels exceeding 108 rads (Si)/sec during normal operations. For levels exceeding the upset thresholds of the support electronics, redundant unbiased magnetic bubble memory may be employed as spares in applications where multiple exposures of transient radiation are not probable.

  • Low Flux Laboratory Test of the Internal Discharge Monitor (IDM) Experiment Intended for Crres

    Twelve planar printed circuit board samples and four cable samples were exposed to a distributed electron source of 150 keV to 2.5 MeV at 4.5 pA/cm2 and were monitored for electron-caused EMP. Discharges were recorded on 10 of the 16 samples during the first 18 hours of testing (total incident fluence equaled 1.8 × 1012 e/cm2).

  • Methodology for Assessing Cable Current from IEMP in SREMP Environments

    This paper presents a calculation of IEMP cable current response due to gamma rays in a source region environment. The obvious relationship between this problem and X-ray IEMP for satellites is discussed, and the nonlinear effects of air conductivity are investigated.

  • Some Analytic Models for Quasi-Static Source Region EMP: Application to Nuclear Lightning

    Analytic solutions are obtained for quasi-static source region EMP with electron dominated air conductivity, ion dominated conductivity, and an intermediate situation. Comparisons are made with previous analyses and with lightning observations on the Mike shot. The gross features of the lightning are not inconsistent with the EMP theory.

  • Experimental Investigation on Electromagnetic Radiation Effects to an Electronic System Through EMP Source

    The radiation effect experiment to a complicated electronic system by using of GW ultra-wide band (UWB) radiation source has been carried out. In cases of opening or closing the door of device under test (DUT) , the responses of test points on combination No.04 and No.08 of DUT have been measured. The response characteristics of test points on combination No.02 have been tested at different orientations of antenna of EUT And spectrum analysis has been performed for response waveforms. The results have shown that the response voltage on internal circuits of EUT may reach about 1.6 kV at condition of opening door of DUT when radiated by UWB source with 2.0 X 10<sup>4</sup> V/m of field strength (rise time is 0.3 ns and pulse width is 3~4 ns). The maximum response voltage on combination No.02 is about 1.6 kV under condition of optimum coupling of antenna. In this case, some of the electronic components which are sensitive to electromagnetic field may be damaged.




Jobs related to EMP radiation effects

Back to Top