Conferences related to Delay estimation

Back to Top

2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 57th ACM/ESDA/IEEE Design Automation Conference (DAC)

The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2022 59th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2021 58th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2019 56th ACM/ESDA/IEEE Design Automation Conference (DAC)

    EDA (Electronics Design Automation) is becoming ever more important with the continuous scaling of semiconductor devices and the growing complexities of their use in circuits and systems. Demands for lower-power, higher-reliability and more agile electronic systems raise new challenges to both design and design automation of such systems. For the past five decades, the primary focus of research track at DAC has been to showcase leading-edge research and practice in tools and methodologies for the design of circuits and systems.

  • 2018 55th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2017 54th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2016 53nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2015 52nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2014 51st ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC Description for TMRF The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading

  • 2013 50th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 session on design methodologies and EDA tool developments, keynotes, panels, plus User Track presentations. A diverse worldwide community representing more than 1,000 organization attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2012 49th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers

  • 2011 48th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference is the world s leading technical conference and tradeshow on electronic design and design automation. DAC is where the IC Design and EDA ecosystem learns, networks, and does business.

  • 2010 47th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers.

  • 2009 46th ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC is the premier event for the electronic design community. DAC offers the industry s most prestigious technical conference in combination with the biggest exhibition, bringing together design, design automation and manufacturing market influencers.

  • 2008 45th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 250 of the leading electronics design suppliers.

  • 2007 44th ACM/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments and an Exhibition and Demo Suite area with over 250 of the leading EDA, silicon and IP Providers.

  • 2006 43rd ACM/IEEE Design Automation Conference (DAC)

  • 2005 42nd ACM/IEEE Design Automation Conference (DAC)

  • 2004 41st ACM/IEEE Design Automation Conference (DAC)

  • 2003 40th ACM/IEEE Design Automation Conference (DAC)

  • 2002 39th ACM/IEEE Design Automation Conference (DAC)

  • 2001 38th ACM/IEEE Design Automation Conference (DAC)

  • 2000 37th ACM/IEEE Design Automation Conference (DAC)

  • 1999 36th ACM/IEEE Design Automation Conference (DAC)

  • 1998 35th ACM/IEEE Design Automation Conference (DAC)

  • 1997 34th ACM/IEEE Design Automation Conference (DAC)

  • 1996 33rd ACM/IEEE Design Automation Conference (DAC)


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE 23rd International Conference on Information Fusion (FUSION)

The International Conference on Information Fusion is the premier forum for interchange of the latest research in data and information fusion, and its impacts on our society. The conference brings together researchers and practitioners from academia and industry to report on the latest scientific and technical advances.


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


More Conferences

Periodicals related to Delay estimation

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Broadcasting, IEEE Transactions on

Broadcast technology, including devices, equipment, techniques, and systems related to broadcast technology, including the production, distribution, transmission, and propagation aspects.


Circuits and Systems II: Express Briefs, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


More Periodicals

Most published Xplore authors for Delay estimation

Back to Top

Xplore Articles related to Delay estimation

Back to Top

An accumulation-based congestion control model

IEEE International Conference on Communications, 2003. ICC '03., 2003

This paper generalizes the TCP Vegas congestion avoidance mechanism and proposes a model to use accumulation, buffered packets of a flow inside network routers, as a congestion measure on which a family of congestion control schemes can be derived. We call this model accumulation-based congestion control (ACC). We use a bit-by-bit fluid model to define the accumulation concept and develop ...


Ultra-wide band sensor networks for tracking point scatterers or relays

2009 6th International Symposium on Wireless Communication Systems, 2009

In this paper we investigate the possible benefits and drawbacks of using a previously proposed ldquosoftrdquo ranging algorithm for tracking moving objects in indoor scenarios. The objects considered in this work could be either passive point scatterers or active relays. A number of ultra-wide band transceivers are deployed throughout the environment, and they are used to estimate multi-path propagation delays, ...


Session: distributed information processing

1988 IEEE International Symposium on Information Theory., 1988

The following topics are dealt with: distributed detection in Gaussian noise; correlated observations; distributed filtering with random sampling and delay; networking delay and channel errors; optimal partitioning of observation; and decentralised hypothesis testing.<<ETX>>


Joint channel and DC offset estimation and synchronization with reduced computational complexity for an EDGE receiver

IEEE 54th Vehicular Technology Conference. VTC Fall 2001. Proceedings (Cat. No.01CH37211), 2001

EDGE (Enhanced Data rates for GSM Evolution) is a set of improvements to the GSM, aiming at providing higher data rate transmission per radio timeslot and increasing spectral efficiency. Such high data rates put new requirements on the receiver design. On the other hand, the receiver design needs to be efficient from a cost, size and power consumption point of ...


Introduction to Correlation Microwave Thermography

1982 12th European Microwave Conference, 1982

Correlation Microwave Thermography, a new process based on a coherent detection of noise, is able to improve the localization of the thermal gradients in the tissues. We explain the principles, of this method and describe the first system which has been built and tested. Several experiments point out that with this process a better spatial resolution and flexibility can be ...


More Xplore Articles

Educational Resources on Delay estimation

Back to Top

IEEE-USA E-Books

  • An accumulation-based congestion control model

    This paper generalizes the TCP Vegas congestion avoidance mechanism and proposes a model to use accumulation, buffered packets of a flow inside network routers, as a congestion measure on which a family of congestion control schemes can be derived. We call this model accumulation-based congestion control (ACC). We use a bit-by-bit fluid model to define the accumulation concept and develop a general control algorithm, which includes a set of control policies. The new prove its proportional fairness and global stability. The ACC model serves as a reference for packet network implementations. We show that TCP Vegas is one possible scheme, which fits into the ACC model. It is well known that Vegas suffer from round trip propagation delay estimation error and reverse path queuing delay. We therefore design a new scheme called Monaco, which solves these problems by employing an out-of-band receiver-based accumulation estimator, with minimal support from network routers. Analysis and simulations comparisons between Vegas and Monaco demonstrate the effectiveness of the Monaco accumulation estimator. We use ns-2 simulations to show that the static and dynamic performance of Monaco matches the theoretic results. One key issue regarding the ACC model in general, i.e., the scalability of router buffer requirement, is discussed.

  • Ultra-wide band sensor networks for tracking point scatterers or relays

    In this paper we investigate the possible benefits and drawbacks of using a previously proposed ldquosoftrdquo ranging algorithm for tracking moving objects in indoor scenarios. The objects considered in this work could be either passive point scatterers or active relays. A number of ultra-wide band transceivers are deployed throughout the environment, and they are used to estimate multi-path propagation delays, that constitute the input data to the tracking algorithm. The motivation behind this work is that ldquosoftrdquo ranging algorithm enables both estimation of ranging error on a measurement- by-measurement basis, and also a straight-forward approach to multiple- hypotheses testing (MHT). Thus, this type of ranging algorithm is likely to fit well into a filter-bank tracking system. Computer simulations based on Ray-tracing propagation data indicates that the proposed approach enables both more robust and also more accurate positioning than when a more conventional threshold-based technique is used for ranging.

  • Session: distributed information processing

    The following topics are dealt with: distributed detection in Gaussian noise; correlated observations; distributed filtering with random sampling and delay; networking delay and channel errors; optimal partitioning of observation; and decentralised hypothesis testing.<<ETX>>

  • Joint channel and DC offset estimation and synchronization with reduced computational complexity for an EDGE receiver

    EDGE (Enhanced Data rates for GSM Evolution) is a set of improvements to the GSM, aiming at providing higher data rate transmission per radio timeslot and increasing spectral efficiency. Such high data rates put new requirements on the receiver design. On the other hand, the receiver design needs to be efficient from a cost, size and power consumption point of view in order to allow high volume production. A receiver architecture that fulfills such mobile terminal requirements is e.g. the direct conversion receiver. Such a receiver, however, suffers from some problems. One of the problems is that the DC offset can not be eliminated completely in the RF part of the receiver and has to be taken care of in the baseband signal processing. Lindoff (2000) proposed to use a least square (LS) algorithm to jointly estimate the channel parameters and the DC offset by a standard correlation algorithm for synchronization. In an environment which generates a high delay spread to the signal, this algorithm can be applied directly only with very high computational complexity, for the LS estimation has to be repeated several times. In order to reduce the complexity we propose to introduce a fine- synchronization step before the LS estimation. This step, usually used for channel estimation and synchronization in the absence of DC offset, can reduce the computational complexity by a factor 5 or 6.

  • Introduction to Correlation Microwave Thermography

    Correlation Microwave Thermography, a new process based on a coherent detection of noise, is able to improve the localization of the thermal gradients in the tissues. We explain the principles, of this method and describe the first system which has been built and tested. Several experiments point out that with this process a better spatial resolution and flexibility can be expected.

  • Time-resolved quantitative spectroscopy of breast using random walk theory

    Application of our methodology, based on the random walk model, to quantify the optical properties of the breast tumors is discussed. Time-resolved in vivo data for several patients, obtained at PTB (Berlin), are analyzed.

  • Estimate Link-Level Transition Matrix from End-to-End Observations

    Network tomography aims to estimate network characteristics from end-to-end (e2e) observation, e.g. link-level loss rate and delay distribution. In this paper, a method is proposed to estimate link-level transition matrix from e2e observations. The estimate obtained from the proposed method is an MLE. Simulation study shows the estimate obtained by the proposed method is very close to the direct measurement that makes it possible to use the estimated characteristic to predict the performance of a link or a path for a short period.

  • Impact of Extending the Runtime of Underestimated Jobs in Backfilling Schedulers

    In standard backfill algorithms, a job will be terminated immediately it has been processed for its estimated runtime. This drives users not to provide tight estimates to make their jobs to be scheduled earlier but at the risk of being killed. This paper presents an enhanced mechanism to tolerate underestimated jobs by continuing processing them on condition that they will not delay any other running or reserved jobs. By comparing the performance of this new mechanism with that of the standard easy backfill with simulation of real workloads, it is shown that the benefits of extending the runtime of underestimated jobs are attractive and the possible degradations are very slight.

  • Joint detection/estimation of multipath effects for the Global Positioning System

    Multipaths cause major impairments to navigation with the Global Positioning System (GPS). Indeed, non-line-of-sight (NLOS) propagation is well known to bias GPS position estimates. A recent methodology has been proposed to overcome this limitation by estimating simultaneously the kinematic states and the multipath biases all along the observation interval. However, multipaths clearly occur relatively infrequently during time intervals of fixed duration. The paper studies a particle filtering algorithm for joint detection and estimation of multipath biases. A Rao-Blackwellized approach allows estimation of the kinematic states by extended Kalman filters, whereas multipath detection is achieved by an appropriate fixed lag particle filter.

  • Single channel adaptive noise cancelation for enhancing noisy speech

    The paper presents a new single channel adaptive noise canceling technique for removing the harmful effects of additive noise on the speech signal. The conventional method makes a reference signal for adaptive filtering using the delay information, i.e., pitch period, estimated on a frame basis from the input speech. The proposed method, however, gets a properly delayed input speech on a sample basis as a reference signal using the recursion formula of the autocorrelation function or average magnitude difference function. By doing that, the problems of the conventional method such as discontinuity between frames, unsuitable processing of the unvoiced sound and the transition region from voiced to unvoiced sound or vice versa can be solved. Experimental results with normalized least mean square and fast least squares adaptive algorithms demonstrate that the proposed method improves the signal-to-noise ratios as well as the perceived speech quality better than the conventional method.<<ETX>>



Standards related to Delay estimation

Back to Top

No standards are currently tagged "Delay estimation"


Jobs related to Delay estimation

Back to Top