Constitution

View this topic in
A constitution is a set of fundamental principles or established precedents according to which a state or other organization is governed. (Wikipedia.org)






Conferences related to Constitution

Back to Top

2023 Annual International Conference of the IEEE Engineering in Medicine & Biology Conference (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted full papers will be peer reviewed. Accepted high quality papers will be presented in oral and poster sessions,will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE.


2020 IEEE 17th Annual Consumer Communications & Networking Conference (CCNC)

IEEE CCNC 2020 will present the latest developments and technical solutions in the areas of home networking, consumer networking, enabling technologies (such as middleware) and novel applications and services. The conference will include a peer-reviewed program of technical sessions, special sessions, business application sessions, tutorials, and demonstration sessions.


2020 IEEE 23rd International Conference on Information Fusion (FUSION)

The International Conference on Information Fusion is the premier forum for interchange of the latest research in data and information fusion, and its impacts on our society. The conference brings together researchers and practitioners from academia and industry to report on the latest scientific and technical advances.


2020 IEEE 29th International Symposium on Industrial Electronics (ISIE)

ISIE focuses on advancements in knowledge, new methods, and technologies relevant to industrial electronics, along with their applications and future developments.


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


More Conferences

Periodicals related to Constitution

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


More Periodicals

Most published Xplore authors for Constitution

Back to Top

Xplore Articles related to Constitution

Back to Top

Induction motor load losses

Proceedings of the American Institute of Electrical Engineers, 1913

On account of uncertainties and irregularities, methods of measuring losses are more desirable than those involving the entire energy. The usual losses, viz. core, loss, friction, and I2r are mentioned and conditions shown under which so-called load losses appear; these are largely in the form of excess core loss, due to saturation of the teeth. Excess copper loss may also ...


Method of rating electrical apparatus

Proceedings of the American Institute of Electrical Engineers, 1913

An investigation, covering the past three years by the subcommittee on the subject of Rating Electrical Machinery, has shown conclusively that the present Standardization Rules of the American Institute of Electrical Engineers have, in many respects, become inconsistent as well as inadequate to meet the present service conditions which electrical apparatus is called upon to fulfill.


Method of determining temperature of A-C. generators and motors, and room temperature

Proceedings of the American Institute of Electrical Engineers, 1913

In this paper, attention is called to various methods of determining temperature of apparatus, recommendations being made for the use of a definite covering for thermometer bulbs, based on the results of experiment. Measurement of temperature by resistance is confined to the rotor windings of machines on which thermometers cannot be applied; the inaccuracy of this determination for stators is ...


Chicago convention conference of Institute officers and section delegates

Proceedings of the American Institute of Electrical Engineers, 1912

Mr. Paul M. Lincoln, Chairman of the Sections Committee, called the meeting to order at 9.00 o'clock P.M., and said: Gentlemen: We are to discuss such matters of policy in regard to the Institute as any one may wish to bring up. There has been intimation from time to time, from some of our members that they would take exception ...


Experiences with oil-insulated transformers

Proceedings of the American Institute of Electrical Engineers, 1907

The current from the St. Croix Power Company's plant is carried underground at 25,000 volts into the heart of the business district, and is there stepped down in the St. Paul Gas Light Company's Cedar street station for use in six- phase synchronous converters and for 2200-volt alternating-current distribution. The transformers for the synchronous-converters are six in number, with one ...


More Xplore Articles

Educational Resources on Constitution

Back to Top

IEEE-USA E-Books

  • Induction motor load losses

    On account of uncertainties and irregularities, methods of measuring losses are more desirable than those involving the entire energy. The usual losses, viz. core, loss, friction, and I2r are mentioned and conditions shown under which so-called load losses appear; these are largely in the form of excess core loss, due to saturation of the teeth. Excess copper loss may also appear and be corrected for, both in primary and secondary. Test results are given showing the effect of saturation in the teeth, and excess copper losses; also from 29 input output tests, showing the efficiency by direct measurements in comparison with the method of losses, showing an average of about ¾ of 1 per cent lower by direct measurement. Results of two tests are shown where load losses were excessive, due to peculiar construction. The conclusion is that where no saturation exists there will be no load losses, and no excess copper losses in wire wound stators.

  • Method of rating electrical apparatus

    An investigation, covering the past three years by the subcommittee on the subject of Rating Electrical Machinery, has shown conclusively that the present Standardization Rules of the American Institute of Electrical Engineers have, in many respects, become inconsistent as well as inadequate to meet the present service conditions which electrical apparatus is called upon to fulfill.

  • Method of determining temperature of A-C. generators and motors, and room temperature

    In this paper, attention is called to various methods of determining temperature of apparatus, recommendations being made for the use of a definite covering for thermometer bulbs, based on the results of experiment. Measurement of temperature by resistance is confined to the rotor windings of machines on which thermometers cannot be applied; the inaccuracy of this determination for stators is pointed out. Temperature measurement by special coils inserted in the windings is recommended for machines of fairly high capacity, wound for 6600 volts and above. For room temperature determination in general, a metal cylinder covering for thermometer bulbs is recommended. Room temperature determination is shown to be of primary importance and a fair room temperature must be arrived at, in different ways, depending on the method of ventilation used.

  • Chicago convention conference of Institute officers and section delegates

    Mr. Paul M. Lincoln, Chairman of the Sections Committee, called the meeting to order at 9.00 o'clock P.M., and said: Gentlemen: We are to discuss such matters of policy in regard to the Institute as any one may wish to bring up. There has been intimation from time to time, from some of our members that they would take exception to the way the Institute is managed. We want to give those gentlemen the chance to speak to-night.

  • Experiences with oil-insulated transformers

    The current from the St. Croix Power Company's plant is carried underground at 25,000 volts into the heart of the business district, and is there stepped down in the St. Paul Gas Light Company's Cedar street station for use in six- phase synchronous converters and for 2200-volt alternating-current distribution. The transformers for the synchronous-converters are six in number, with one spare transformer, all of 300-kw. rating, designed for 22,500 volts on the high-tension end and 78 volts supply to the converters. In addition to these there are four 200-kw. transformers with the same primary voltage but with secondaries having 25 extra taps, brought out at one terminal, with 20 volts between taps; these giving a range of voltage from 2100 to 2600 volts. These transformers are connected on the Scott system to change from three- to two-phase current, an extra primary tap being provided to give the right ratio.

  • Appendix IV

    None

  • The evolution of the Institute and of its members: President's address

    Introduction THE constitution of this Institute prescribes that the president “shall deliver an address at the annual convention.” The duty thereby assigned to the president becomes one of his last official ones, when the annual convention falls so near the end of the term of office, as it has in the last few years.

  • High speed turbo-alternators — Designs and limitations

    The paper discusses the design of turbo-alternators with reference to the limitations imposed by very high rotative speeds and large capacities. Bolted- on rotor shafts have superseded through-shafts for very high speeds, and both the radial-slot and the parallel-slot types of rotors have inherent advantages for machines of certain capacities. Ventilation is difficult on account of the large total loss which occurs in a limited space, requiring very large volumes of cooling air at very high velocities. Various ventilating systems are described, and the effects of temperature limitations upon the design are discussed. Insulating materials are considered with reference to their mechanical strength and resistance to heat. The use of mica in various forms has solved many difficulties due to high temperature and to static discharges. The copper and iron losses of these units are analyzed; the total losses are no greater than those of low-speed units of corresponding capacity. Protection against fire within the machine is most effectively provided by doors or valves, entirely cutting off the interior of the machine from the outside air. The regulation is sacrificed to some extent, in order to limit short circuit current, by making the armature reactance as high as the design will permit.

  • Session E - Broadband Waveguide Filters with Wide Using a Stepped-Wall Evanescent Mode Approach

    Utilizing more than one below cut-off cross section, evanescent mode series coupled bandpass filters are described which achieve wide passbands and stopbands with practical mechanical dimensions. Performance is comparable to the conventional approach. The new design is applicable for center frequencies to above 40 GHz.

  • College teachers subhealth decision analyzing by using improved association rules

    With the high development of science and technology, the progresses of society, the increasing pressure of modern work, the trend of peoplepsilas health states is dropping gradually. The number of people in subhealthy state is enlarging day by day. Many researchers have done a lot of researches on the constitution health data of college teachers by traditional math analyzing method. Some superficial information is obtained easily though traditional query operation from constitution data, but deep level information that hides in the constitution data is difficult to be discovered. Based on it, an improved association algorithm is proposed and applied in constitution health data analyzing. The results manifest that the algorithm is effective in constitution health data analyzing.



Standards related to Constitution

Back to Top

No standards are currently tagged "Constitution"


Jobs related to Constitution

Back to Top