Conferences related to Companies

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)

All topics related to engineering and technology management, including applicable analytical methods and economical/social/human issues to be considered in making engineering decisions.


2020 IEEE Power & Energy Society General Meeting (PESGM)

The Annual IEEE PES General Meeting will bring together over 2900 attendees for technical sessions, administrative sessions, super sessions, poster sessions, student programs, awards ceremonies, committee meetings, tutorials and more


2019 Chinese Control And Decision Conference (CCDC)

Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2018 Chinese Control And Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2017 29th Chinese Control And Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2016 Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create aforum for scientists, engineers and practitioners throughout the world to present the latestadvancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2015 27th Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2014 26th Chinese Control And Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create aforum for scientists, engineers and practitioners throughout the world to present the latestadvancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2013 25th Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2012 24th Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2011 23rd Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2010 Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies

  • 2009 Chinese Control and Decision Conference (CCDC)

    Chinese Control and Decision Conference is an annual international conference to create a forum for scientists, engineers and practitioners throughout the world to present the latest advancement in Control, Decision, Automation, Robotics and Emerging Technologies.

  • 2008 Chinese Control and Decision Conference (CCDC)


More Conferences

Periodicals related to Companies

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


More Periodicals

Most published Xplore authors for Companies

Back to Top

Xplore Articles related to Companies

Back to Top

The relation of load-factor to the evaluation of hydroelectric plants

Proceedings of the American Institute of Electrical Engineers, 1906

The value of any water-power plant is due primarily to its earnings, with earnings dependent on the market for its output, and secondarily to the type and quality of the apparatus installed and of the development as a whole. In the case of plants that are in process of development, or that are only partly loaded, the value is, of ...


Discussion on “telephone engineering,” at New York, February 23, 1906

Proceedings of the American Institute of Electrical Engineers, 1906

Thomas D. Lockwood: In the early years of the telephone exchange, when the telephone engineers of the present time — yes, and the telephone business managers of the present time — were learning their business by hard knocks, we all thought, having no idea of course of what the telephone exchange would grow to, that the greatest and most wonderful ...


The importance of research and development in maintaining technical progress

Electrical Engineering, 1938

Research and development work usually are regarded as highly technical subjects and generally are so treated, but it is recognized that management has a very definite interest in their influence on technical progress, particularly in the industrial fields. This article is presented with this point in mind, and various suggestions and illustrations are offered as to how this kind of ...


Discussion on “the engineer's activity in public affairs — Public utility commissions and franchise valuations”, at New York, April 10, 1908

Proceedings of the American Institute of Electrical Engineers, 1908

George S. Coleman: In one respect I agree with Mr. Floy, engineers as a class are, perhaps, a little too modest; but I do not quite agree that engineers ought to be considered in any wise responsible for matters which are hard enough for other men to handle, men who are devoting all their time to it. I do think, ...


Potential waves of alternating-current generators

Proceedings of the American Institute of Electrical Engineers, 1913

The author states his purpose to be three-fold: 1. To discuss briefly certain elements in design that affect the character of the potential wave; 2. To show the effect of load and operating conditions on the no-load wave; 3. To give illustrations of the potential waves, — good, bad and indifferent, of generators, that actually supply the a-c. systems throughout ...


More Xplore Articles

Educational Resources on Companies

Back to Top

IEEE-USA E-Books

  • The relation of load-factor to the evaluation of hydroelectric plants

    The value of any water-power plant is due primarily to its earnings, with earnings dependent on the market for its output, and secondarily to the type and quality of the apparatus installed and of the development as a whole. In the case of plants that are in process of development, or that are only partly loaded, the value is, of course, more or less of a speculative nature, and is estimated on the basis of possible and probable income. Prospective earnings as well as actual earnings necessarily rely on selling an amount of power equal to the maximum or the ultimate capacity of the development; and the number of hours per day during which the maximum capacity can be utilized is a definite factor in deciding the price at which the power is sold. This is equivalent to saying that earnings depend on the load-factor, where that is considered as the ratio between the average output of the station and its rated capacity. Carried to the extreme, zero load-factor means no market for the power and consequently no value to the plant. The type or class of installation, whether good, bad, or indifferent, does not affect such valuation, for the reason that the plant represents nothing as to earning power.

  • Discussion on “telephone engineering,” at New York, February 23, 1906

    Thomas D. Lockwood: In the early years of the telephone exchange, when the telephone engineers of the present time — yes, and the telephone business managers of the present time — were learning their business by hard knocks, we all thought, having no idea of course of what the telephone exchange would grow to, that the greatest and most wonderful feature of telephony was the invention of the telephone itself; and of course in a sense that was so and is so. But when all is said and done, and we have given to the telephone and its inventor all of the credit, honor, and glory to which it and he are unquestionably entitled, I think we should still have enough to spare for the men who have built and perfected the telephone business, who have constructed and perfected the telephone exchange, and who have designed and organized the art of telephone engineering, as expounded in the paper we have just heard.

  • The importance of research and development in maintaining technical progress

    Research and development work usually are regarded as highly technical subjects and generally are so treated, but it is recognized that management has a very definite interest in their influence on technical progress, particularly in the industrial fields. This article is presented with this point in mind, and various suggestions and illustrations are offered as to how this kind of activity may be stimulated and more effectively controlled.

  • Discussion on “the engineer's activity in public affairs — Public utility commissions and franchise valuations”, at New York, April 10, 1908

    George S. Coleman: In one respect I agree with Mr. Floy, engineers as a class are, perhaps, a little too modest; but I do not quite agree that engineers ought to be considered in any wise responsible for matters which are hard enough for other men to handle, men who are devoting all their time to it. I do think, however, that the time has come when groups of engineers, different kinds of engineers, should give the benefit of their concerted thought and action to any public question on which they are supposed to be especially well informed. In the case of a new bridge across any of our rivers, or a new subway, or a new elevated railroad, in fact any kind of engineering work likely to affect the public, this Institute, and every body of engineers who in any way might be related to that enterprise, should be heard officially. If Mr. Floy's suggestion this evening shall encourage among engineers the habit of not merely quiet, independent thought in their work, but concerted action after discussion, he will have accomplished a notable result.

  • Potential waves of alternating-current generators

    The author states his purpose to be three-fold: 1. To discuss briefly certain elements in design that affect the character of the potential wave; 2. To show the effect of load and operating conditions on the no-load wave; 3. To give illustrations of the potential waves, — good, bad and indifferent, of generators, that actually supply the a-c. systems throughout the country. There are ninety illustrations in all; a study of these shows, in connection with the descriptions given, that the most perfect wave is obtained where the proper shading of the magnetic flux is obtained either by shaping the poles, in the case of definite pole machines, or the proper distribution of field winding, in the case of cylindrical rotor machines, together with an irregular, or more or less prime relation between the number of slots in the armature and number of poles.

  • Telephone engineering

    Engineering may broadly be divided into two classes, civil and military. Military engineering is that which pertains to the conduct of war and is sufficiently understood to require no description. Civil engineering, as I am now using the term, comprehends all forms of engineering which are conducted without special reference to the operations of war. Falling within this definition of civil engineering we have electrical engineering, mechanical engineering, telegraph engineering, telephone engineering, and some others. As taught in colleges, however, and as generally understood, civil engineering is restricted and deals more especially with that branch of the art which pertains to the construction of bridges, water works, railroads, harbor improvements, and other public works of like character.

  • Discussion on “a new method of training engineers,” and “the relation of the manufacturing company to the technical graduate.” Atlantic City, N. J., July 2, 1908

    B. A. Behrend: Permit me to discuss the paper by Mr. Alexander, suggesting a new method for training engineers by alternating shop work with college work. Let us see how difficult it would be to have such courses at institutions situated far away from manufacturing centers like Cornell, Leland Stanford, University of Wisconsin, or Pennsylvania State College. How could the students in these universities attend the lectures for one week and go into the shops for the next week, or for one month and go into the shop for the next month? There are no shops or manufacturing plants near enough in which the students could pursue practical work, and thus the proposed “Coöperative System” is altogether impossible in a large number of our universities.

  • Magnetic force of a solenoid

    The method generally employed for determining the axial and radial components of the magnetic force of a one-layer cylindrical solenoid makes use of the vector potential. While no inherent difficulties are connected with this, the calculations nevertheless are lengthy. The method here described is simpler, as it presupposes only Ampere's law. It is known that this law, which is usually given in the form

  • Basic telecom service situation in China (2015)

    Lists the value of telecommunication companies in China.

  • Five cultures that kill innovation

    The marketplace demands new products, new services, new business models, new processes, and new creative ideas. Recent emerging trends, including globalization and shifting technology, have increased the push for efficiency and effectiveness, further driving the innovation process. The fear of appearing obsolete or out-of-date is only expanding that drive. Business as usual is no longer enough to prosper and perhaps it never was. For any region to survive this hyper change period it needs to not only accept but promote the "crazy" innovators in its midst.



Standards related to Companies

Back to Top

No standards are currently tagged "Companies"


Jobs related to Companies

Back to Top