Conferences related to Chemical lasers

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE IAS Petroleum and Chemical Industry Committee (PCIC)

The PCIC provides an international forum for the exchange of electrical applications technology related to the petroleum and chemical industry. The PCIC annual conference is rotated across North American locations of industry strength to attract national and international participation. User, manufacturer, consultant, and contractor participation is encouraged to strengthen the conference technical base. Success of the PCIC is built upon high quality papers, individual recognition, valued standards activities, mentoring, tutorials, networking and conference sites that appeal to all.


2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)

All areas of ionizing radiation detection - detectors, signal processing, analysis of results, PET development, PET results, medical imaging using ionizing radiation


More Conferences

Periodicals related to Chemical lasers

Back to Top

Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Computational Biology and Bioinformatics, IEEE/ACM Transactions on

Specific topics of interest include, but are not limited to, sequence analysis, comparison and alignment methods; motif, gene and signal recognition; molecular evolution; phylogenetics and phylogenomics; determination or prediction of the structure of RNA and Protein in two and three dimensions; DNA twisting and folding; gene expression and gene regulatory networks; deduction of metabolic pathways; micro-array design and analysis; proteomics; ...


Education, IEEE Transactions on

Educational methods, technology, and programs; history of technology; impact of evolving research on education.


Electron Device Letters, IEEE

Publishes original and significant contributions relating to the theory, design, performance and reliability of electron devices, including optoelectronic devices, nanoscale devices, solid-state devices, integrated electronic devices, energy sources, power devices, displays, sensors, electro-mechanical devices, quantum devices and electron tubes.


Electron Devices, IEEE Transactions on

Publishes original and significant contributions relating to the theory, design, performance and reliability of electron devices, including optoelectronics devices, nanoscale devices, solid-state devices, integrated electronic devices, energy sources, power devices, displays, sensors, electro-mechanical devices, quantum devices and electron tubes.


More Periodicals

Most published Xplore authors for Chemical lasers

Back to Top

Xplore Articles related to Chemical lasers

Back to Top

Investigation of collisional processes in a laser produced plasma

IEEE Conference Record - Abstracts. 1992 IEEE International Conference on Plasma, 1993

None


Perpendicular magnetic anistrophy in iron films produced by laser chemical vapour deposition of FE(CO)/sub 5/

1990 IEEE International Magnetics Conference (INTERMAG), 1990

None


New ophthalmic lasers and their potential therapeutic applications

Electro International, 1991, 1991

The purpose of this short manuscript is to quickly familiarize the reader with the laser-tissue interactions of photocoagulation, photovaporization, photodisruption, photodynamic therapy, photoablative decomposition, and phototherapy and with the application of these laser-tissue interactions to various portions of the eye from the cornea posterior to the retina.


Direct IC pattern generation by laser writing

1980 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1980

A flexible IC pattern-generating laser, tool enabling modification of features by direct photoresist exposure, while viewing existing patterns, will be covered. Technique eliminates need for precision registration alignment.


Fiber Optic Safety

Fiber Optic Safety, 12/14/2009

This tutorial is designed for those working with fiber optics and related optical technologies. This video covers safety issues for field and lab applications. You will learn about proper fiber handling, disposal and working safely with lasers and chemicals. Safety in the field is covered, addressing installation issues such as confined spaces, protective clothing, and right- to-know laws. Examples of ...


More Xplore Articles

Educational Resources on Chemical lasers

Back to Top

IEEE.tv Videos

Parallelized Linear Classification with Volumetric Chemical Perceptrons - Jacob Rosenstein - ICRC 2018
Nanotechnology For Electrical Engineers
Life Sciences: Surface Enhanced Raman Spectroscopy, and more
Lighting the Way: Optical Sensors in the Life Sciences
Breaking Spectral and Performance Barriers for Diode Lasers - Plenary Speaker, Manijeh Razeghi - IPC 2018
Hertz-Class Brillouin Lasing with Nanokelvin Thermal Sensing - William Loh - Closing Ceremony, IPC 2018
Electrically-Pumped 1.31 μm MQW Lasers by Direct Epitaxy on Wafer-Bonded InP-on-SOI Substrate - Yingtao Hu - Closing Ceremony, IPC 2018
An IEEE IPC Special Session with Alexander Spott of The Optoelectronics Research Group
Engineering the Future - Frances Arnold, Ph.D.
Microstructure-Property Correlations in Superconducting Wires - Applied Superconductivity Conference 2018
Ultrafast Lasers for Multi-photon Microscopy - Plenary Speaker: Jim Kafka - IPC 2018
2013 IEEE Corporate Innovation Award
Lasers in Your Living Room with Mitsubishi's New LaserVue TVs
IEEE Edison Medal - Eli Yablonovich - 2018 IEEE Honors Ceremony
Semiconductor Laser Development at Hisense Photonics - Yanfeng Lao - IPC 2018
Yasuhiko Arakawa, Pallab Bhattacharya, Dieter H. Bimberg - IEEE Jun-Ichi Nishizawa Medal, 2019 IEEE Honors Ceremony
M. George Craford accepts the IEEE Edison Medal - Honors Ceremony 2017
Larson Collection interview with Arthur L. Schawlow
2011 IEEE Awards Edison Medal - Isamu Akasaki
Capturing Sound with Smoke and Lasers

IEEE-USA E-Books

  • Investigation of collisional processes in a laser produced plasma

    None

  • Perpendicular magnetic anistrophy in iron films produced by laser chemical vapour deposition of FE(CO)/sub 5/

    None

  • New ophthalmic lasers and their potential therapeutic applications

    The purpose of this short manuscript is to quickly familiarize the reader with the laser-tissue interactions of photocoagulation, photovaporization, photodisruption, photodynamic therapy, photoablative decomposition, and phototherapy and with the application of these laser-tissue interactions to various portions of the eye from the cornea posterior to the retina.

  • Direct IC pattern generation by laser writing

    A flexible IC pattern-generating laser, tool enabling modification of features by direct photoresist exposure, while viewing existing patterns, will be covered. Technique eliminates need for precision registration alignment.

  • Fiber Optic Safety

    This tutorial is designed for those working with fiber optics and related optical technologies. This video covers safety issues for field and lab applications. You will learn about proper fiber handling, disposal and working safely with lasers and chemicals. Safety in the field is covered, addressing installation issues such as confined spaces, protective clothing, and right- to-know laws. Examples of good safety practices, standards, and areas of concern are presented for education of management and craft personnel. After completing this tutorial you should have an understanding of: safety in the work area; safe handling of optical fibers; safe disposal of optical fibers; laser safety; ultraviolet light; chemicals and right-to-know laws; safety standards; protective clothing and eyewear; safety in installations; confined spaces; high voltage; and safety tools.

  • Expansion Of Plasmas Into Vacuum

    None

  • Recent Progress In The Growth, Fabrication And Application Of Potassium Niobate Single Crystals

    None

  • 1.55-/spl mu/m bottom-emitting InAlGaAs VCSELs with Al/sub 2/O/sub 3//a-Si thin-film pairs as a top mirror

    We demonstrate a 1.55-/spl mu/m InAlGaAs/InP vertical-cavity surface-emitting laser grown by metal-organic chemical vapor deposition. AI/sub 2/O/sub 3/-Si thin-film pairs and InAlGaAs/InAlAs epitaxial layers are used as a top mirror and a bottom-side output coupler, respectively. Direct modulation characteristics through single mode fiber are reported in the speed of 2.5 Gbit/s.

  • Theoretical calculations of detonation initiated chemical lasers

    None

  • Performance of a high-efficiency 5-cm gain length supersonic chemical oxygen-iodine laser

    The Air Force Phillips Laboratory has developed a small-scale supersonic chemical oxygen-iodine laser (COIL) test stand (VertiCOIL) to rapidly evaluate emerging potential technology improvements. VertiCOIL was designed to address issues relevant to military and commercial applications such as long run time, high-efficiency operation, and compact design. VertiCOIL demonstrated an overall chemical efficiency of nearly 27%, one of the highest chemical efficiencies ever achieved by a COIL. In addition, VertiCOIL was able to lase for greater than 1 h by employing a continuously cooled basic hydrogen peroxide (BHP) flowing loop. Measured resonator parameters were used with a simplified saturation model to calculate the optical extraction efficiency. The peak optical extraction efficiency predicted by the model was 0.82. The dependence of the predicted extraction efficiency on outcoupling fraction is in good agreement with experimental results. Combining the predicted extraction efficiency with the COIL heuristic equation results in good agreement between measured and predicted overall device chemical efficiency.



Standards related to Chemical lasers

Back to Top

No standards are currently tagged "Chemical lasers"


Jobs related to Chemical lasers

Back to Top