Conferences related to Battery charge measurement

Back to Top

2021 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE)

FUZZ-IEEE 2021 will represent a unique meeting point for scientists and engineers, both from academia and industry, to interact and discuss the latest enhancements and innovations in the field. The topics of the conference will cover all the aspects of theory and applications of fuzzy sets, fuzzy logic and associated approaches (e.g. aggregation operators such as the Fuzzy Integral), as well as their hybridizations with other artificial and computational intelligence techniques.


2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2021 IEEE Pulsed Power Conference (PPC)

The Pulsed Power Conference is held on a biannual basis and serves as the principal forum forthe exchange of information on pulsed power technology and engineering.


ICC 2021 - IEEE International Conference on Communications

IEEE ICC is one of the two flagship IEEE conferences in the field of communications; Montreal is to host this conference in 2021. Each annual IEEE ICC conference typically attracts approximately 1,500-2,000 attendees, and will present over 1,000 research works over its duration. As well as being an opportunity to share pioneering research ideas and developments, the conference is also an excellent networking and publicity event, giving the opportunity for businesses and clients to link together, and presenting the scope for companies to publicize themselves and their products among the leaders of communications industries from all over the world.


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


More Conferences

Periodicals related to Battery charge measurement

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Biomedical Circuits and Systems, IEEE Transactions on

The Transactions on Biomedical Circuits and Systems addresses areas at the crossroads of Circuits and Systems and Life Sciences. The main emphasis is on microelectronic issues in a wide range of applications found in life sciences, physical sciences and engineering. The primary goal of the journal is to bridge the unique scientific and technical activities of the Circuits and Systems ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


More Periodicals

Most published Xplore authors for Battery charge measurement

Back to Top

Xplore Articles related to Battery charge measurement

Back to Top

Field intercomparison of NBIS smart ACḾs with EG&G sea link VMCḾs

Proceedings of the 1986 IEEE Third Working Conference on Current Measurement, 1986

None


Minimization of Driving Test (MDT)

Radio Protocols for LTE and LTE-Advanced, None

None


Considerations underlying the study of sensory elements

1963 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1963

None


Tractive resistances to a motor delivery wagon on different roads and at different speeds

Proceedings of the American Institute of Electrical Engineers, 1916

In this paper is given a complete report on an investigation of tractive resistances of urban roads to a motor delivery wagon equipped with solid rubber tires. The “tractive resistance” as used in this paper, includes still- air resistance, but does not include wind resistance and the resistances internal to the truck. The test truck is fully described with its ...


Grateful Acknowledgment

IRE Transactions on Product Engineering and Production, 1961

None


More Xplore Articles

Educational Resources on Battery charge measurement

Back to Top

IEEE.tv Videos

APEC 2011- Methode Electronics at APEC 2011
ISEC 2013 Special Gordon Donaldson Session: Remembering Gordon Donaldson - 7 of 7 - SQUID-based noise thermometers for sub-Kelvin thermometry
The Josephson Effect: The Josephson Volt
CES 2009: Schwinn's E-Bike Has a Removable Battery
IMS 2011 Microapps - A Comparison of Noise Parameter Measurement Techniques
IMS 2011 Microapps - Ultra Low Phase Noise Measurement Technique Using Innovative Optical Delay Lines
IMS 2011 Microapps - Waveguide Characteristics and Measurement Errors
IMS 2011 Microapps - Vector-Receiver Load Pull - Measurement Accuracy at its Best
IMS 2012 Microapps - Passive Intermodulation (PIM) measurement using vector network analyzer Osamu Kusano, Agilent CTD-Kobe
The Fundamentals of Battery Charger Design
I2MTC 2014 Conference Preview
Silicon Labs' Thunderboard Sense (SLTB001A): Mouser Engineering Bench Talk
Residential Nanogrids with Battery Storage; Is This Our Future? - Antonio Ginart at APEC 2016
International Future Energy Challenge 2015!
APEC 2012 - Thomas S. Buzak Plenary
5G Wireless A Measurement and Metrology Perspective: MicroApps 2015 - Keysight Technologies
MicroApps: Recent Improvement on Y-Factor Noise Figure Measurement Uncertainty (Agilent Technologies)
Micro-Apps Keynote 2013: Modern RF Measurements and How They Drive Spectrum Analyzer Digital IF Processor Design
Regenerative Energy Storage Systems for Hybrid Electric and Battery Electric Vehicles
IEEE Entrepreneurship @ Hello Tomorrow Global Summit: Brill Power

IEEE-USA E-Books

  • Field intercomparison of NBIS smart ACḾs with EG&G sea link VMCḾs

    None

  • Minimization of Driving Test (MDT)

    None

  • Considerations underlying the study of sensory elements

    None

  • Tractive resistances to a motor delivery wagon on different roads and at different speeds

    In this paper is given a complete report on an investigation of tractive resistances of urban roads to a motor delivery wagon equipped with solid rubber tires. The “tractive resistance” as used in this paper, includes still- air resistance, but does not include wind resistance and the resistances internal to the truck. The test truck is fully described with its driving mechanism and the storage battery which supplied the motive power. The investigation involved test runs over definite lengths of road, at measured truck speeds, to determine the gross battery output during these runs; and laboratory tests to determine the overall efficiency of the truck between battery terminals and rear-wheel treads at speeds and loads corresponding to the road tests. The results included in the paper are (1) overall efficiency of truck mechanism and (2) tractive resistances of a number of typical urban roads. The components of tractive resistance for a typical road are also given.

  • Grateful Acknowledgment

    None

  • Field Performance of NBIS Smart ACḾs with EG&G Sea Link VMCḾs

    In three separate deployments from Fall 1984 through Spring 1985 the Neil Brown Instrument Systems' (NBIS) Smart Acoustic Current Meters (SACM) were deployed. In the first deployment, part of NOAA's Delaware Bay Experiment, less than a month of data was returned of approximately eight current meter months of deployment. Hardware problems accounted for most of this poor data return.

  • A BAYESIAN APPROACH TO BATTERY PROGNOSTICS AND HEALTH MANAGEMENT

    This chapter deals with each of three components of battery health management (BHM): battery state estimation, battery prognostics, and decision making. The state‐of‐health (SOH) of batteries is a measurement that reflects the general condition of a battery and its ability to deliver the specified performance compared to a fresh battery. The chapter discusses how to determine the remaining useful life (RUL) of a battery. State estimation techniques, like the extended Kalman filter (EKF), have been applied for real‐time prediction of state‐of‐charge (SOC) and SOH of automotive batteries. A decision‐level fusion of data‐driven algorithms, like Autoregressive Integrated Moving Average (ARIMA) and neural networks, have been investigated for both diagnostics and prognostics. Particle filters (PFs) are a novel class of nonlinear filters that combine Bayesian learning techniques with importance sampling to provide good state tracking performance while keeping the computational load tractable.

  • Estuary parameter measurements and data handling - A new approach using underwater sound telemetry

    None

  • ThinLine Portable Energy Products. A new approach to sealed lead battery technology

    Sealed lead-acid cells and batteries have historically been designed using containers with thick plastic walls reinforced with heavy plastic ribs or steel casings to withstand the internal pressure and compression forces required for efficient performance and long life. These design approaches have significantly detracted from the practical energy density and specific energy of sealed lead-acid electrochemistry because of the volume and weight of the passive component materials not participating in energy storage. Here, ThinLine Portable Energy Products present a new approach to the design of sealed lead-acid batteries that reduces the weight and volume of the passive components resulting in much higher specific energy (weight) and energy density (volume). In addition, the planar ThinLine design overcomes the geometric incongruity of packaging round cells into rectangular cases resulting in a 10-25% loss in efficiency.

  • Using high speed pulse as an analysis tool [for secondary batteries]

    The advent of high-speed pulse technology in battery and cell test instrumentation has provided researchers with a number of important analytical and modeling tools for battery and cell research. This paper is a survey of some of those procedures.



Standards related to Battery charge measurement

Back to Top

IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications

This recommended practice provides installation design, installation, maintenance and testing procedures, and test schedules that can be used to optimize the life and performance of vented nickel-cadmium batteries. It also provides guidance for determining when these batteries should be replaced. (Scope unchanged from previous version.)


IEEE Standard for Rechargeable Batteries for Cellular Telephones

This standard establishes criteria for design analysis for qualification, quality, and reliability of rechargeable lithium ion and lithium ion polymer batteries for cellular telephone applications. Also included in the standard are: battery pack electrical and mechanical construction, packaging technologies, and pack and cell level charge and discharge controls and overall system considerations.



Jobs related to Battery charge measurement

Back to Top