Conferences related to Blades

Back to Top

2021 IEEE Pulsed Power Conference (PPC)

The Pulsed Power Conference is held on a biannual basis and serves as the principal forum forthe exchange of information on pulsed power technology and engineering.


2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


More Conferences

Periodicals related to Blades

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


More Periodicals

Most published Xplore authors for Blades

Back to Top

Xplore Articles related to Blades

Back to Top

An inexpensive drifter for surface currents

Proceedings of the 1982 IEEE Second Working Conference on Current Measurement, 1982

None


Electronics in a changing research climate

1975 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1975

The research climate, in the US and in Europe, is now undergoing considerable change. While the prevailing trends are different, the research scenes on both sides of the Atlantic are becoming more similar than they were in the past. Long term effects will be described and contrasted to transient short-term effects. What is happening in electronics is a good indicator ...


Correction to "A Computer Optimization of the Rayleigh-Ritz Method"

IEEE Transactions on Microwave Theory and Techniques, 1970

None


Electrical features of block signaling

Proceedings of the American Institute of Electrical Engineers, 1905

It has been only within the last decade that electrical science has played any important part in block-signaling. Previous to that time the only use for electrical apparatus in signaling was in the form of a few batteries for the track circuit, and for the operation of pin-valve magnets in the electropneumatic system of signaling and interlocking. But in the ...


Failure analysis on foreign object damage of aero-engine compressor blade

2009 8th International Conference on Reliability, Maintainability and Safety, 2009

Aero-engine blades always failure due to impact of foreign object damage in service. Damnification and consequent fracture failure of blade is one of the main failure modes for the compressor blades in aero-engine. Damage characteristic on blades caused by different kind of material are various. Observation on damaged surfaces, trace analysis and surface element analysis by means of SEM and ...


More Xplore Articles

Educational Resources on Blades

Back to Top

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Blades"

IEEE-USA E-Books

  • An inexpensive drifter for surface currents

    None

  • Electronics in a changing research climate

    The research climate, in the US and in Europe, is now undergoing considerable change. While the prevailing trends are different, the research scenes on both sides of the Atlantic are becoming more similar than they were in the past. Long term effects will be described and contrasted to transient short-term effects. What is happening in electronics is a good indicator of a more general evolution, since technological progress in electronics has always been much faster than in mechanical and electrical power engineering. The rapid penetration of electronics into electric power systems, caused by the energy crisis, creates some distinct problems having particular impact on the innovation climate.

  • Correction to "A Computer Optimization of the Rayleigh-Ritz Method"

    None

  • Electrical features of block signaling

    It has been only within the last decade that electrical science has played any important part in block-signaling. Previous to that time the only use for electrical apparatus in signaling was in the form of a few batteries for the track circuit, and for the operation of pin-valve magnets in the electropneumatic system of signaling and interlocking. But in the past few years electricity has come steadily into use as a means of transmitting the operating power, until at the present time it is the prime element in signaling.

  • Failure analysis on foreign object damage of aero-engine compressor blade

    Aero-engine blades always failure due to impact of foreign object damage in service. Damnification and consequent fracture failure of blade is one of the main failure modes for the compressor blades in aero-engine. Damage characteristic on blades caused by different kind of material are various. Observation on damaged surfaces, trace analysis and surface element analysis by means of SEM and X-ray energy spectrum are effective methods to estimate the attribute, component and outline of foreign object. In this paper, analysis on several cases of FOD are introduced. The features, principles and rules of several typical FOD modes are summarized through failure cases analysis.

  • Evaluation of a dual-purpose chemical applicator for paddy fields

    A dual-purpose chemical applicator for flooded paddy field was developed to boost agricultural mechanization in rice production and also to overcome the safety concern of hazardous spray drift during chemical application by the paddy farmers. The dual purpose applicator was mounted on a high clearance tractor and could also be used with remote-controlled buoyant vehicle which was propelled by electric motors within the flooded paddy field. The machine performances for both granular and liquid chemical application were reported. Results from the experimental tests suggest that the average effective field capacity for the equipment with a prime mover was found to be 0.89 ha/hr or 7.12 ha/man-day for a 8 hour working day.

  • Micro-drone RCS analysis

    This paper presents both simulation and experimental results of micro-drone rotor blade electromagnetic scattering. The focus of this work is investigating the variation of these reflections as a function of variables such as polarization, frequency and azimuth angle. The simulation results clearly show a strong variation in scattering with azimuth and frequency. Experimental validation of these variations was investigated and similar trends in azimuth were found. The Doppler components from an operational micro-drone in varying polarizations are shown, these demonstrate the expected signals received by a real radar system.

  • An integrated approach to the application of high bandwidth optical pyrometry to turbine blade surface temperature mapping

    As gas turbine manufacturers strive for improved efficiency the turbine operating temperatures increase which can only be met by improvements in blade and coating materials together with advances in cooling and coating technologies. The ultimate, and possibly the only, environment capable of testing modem blade systems is in a working engine and it is from this environment that instrumentation a range of instrumentation technologies must acquire valid blade performance data. A critical blade parameter is the surface temperature distribution and this paper reviews the various technologies currently applied to blade surface temperature distribution measurement. Optical Pyrometry is discussed in more detail and the definition of an integrated high bandwidth detection and data collection system developed. The system developed collects turbine and stores radiance measurements at the rate of 1 million per second and this paper explores the benefits that can accrue from this approach in areas such as noise reduction and blade scanning techniques. The output from such a system is a data file representing a 'thermal image' of all the blade surfaces viewed by the pyrometer. The conversion of the 'thermal image' into a temperature image is discussed and the role of complimentary measurement methods in refining the temperature image is reviewed. The integration of measurement techniques limits the ability of suppliers to deliver an 'Off-The-Shelf' measurement capability. In the light of this the limitations of the system outlined in the paper are discussed and the need for collaborative effort between the system supplier and the users technical departments emphasised.

  • Behaviour of wind turbine under different operating modes

    In wind energy conversion system the wind turbine captures the kinetic energy associate with the wind for the production of electricity with the help of generator. Performance of a wind turbine is dependent upon its operating conditions such as wind speed as well as its design parameters such as blade radius, blade pitch angle, weight etc. In the present paper, authors have made an attempt to develop a MATLAB/SIMULINK model of wind turbine. Model as developed is suitable to investigate its performance under constant as well as variable speed mode. Simulated results as obtained are found to be useful to predict the effect of wind speed and blade pitch on the performance of wind turbine under two operating modes.

  • Dynamics of charged jets in dielectric liquids

    A blade-plane or a point-plane configuration in a dielectric liquid is considered. For high electric injection from the blade or the point takes place with ions of the same polarity. The Coulomb force acting upon the injected charges generates an electrohydrodynamic (EHD) flow, referred to as a charged jet. These EHD charged jets can be approximated as a free boundary layer flow, and a similarity analysis can be performed under some simplifying assumptions. Experimental observations for the case of blade-plane geometry are presented.



Standards related to Blades

Back to Top

IEEE Standard Requirements for High Voltage Switches


IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories

This project will add new definitions and revise existing definitions to bring the document up to date. Altitude correction factors will be revised to reflect the recommendations of the Switchgear Committee "Common Clauses" working group. Standard C37.40b, definitions for Capacitor Fuses, will be incorporated into the new document.



Jobs related to Blades

Back to Top