Conferences related to Bones

Back to Top

2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)

The conference program will consist of plenary lectures, symposia, workshops and invitedsessions of the latest significant findings and developments in all the major fields of biomedical engineering.Submitted papers will be peer reviewed. Accepted high quality papers will be presented in oral and postersessions, will appear in the Conference Proceedings and will be indexed in PubMed/MEDLINE


2020 IEEE 17th International Symposium on Biomedical Imaging (ISBI 2020)

The IEEE International Symposium on Biomedical Imaging (ISBI) is the premier forum for the presentation of technological advances in theoretical and applied biomedical imaging. ISBI 2020 will be the 17th meeting in this series. The previous meetings have played a leading role in facilitating interaction between researchers in medical and biological imaging. The 2020 meeting will continue this tradition of fostering cross-fertilization among different imaging communities and contributing to an integrative approach to biomedical imaging across all scales of observation.

  • 2019 IEEE 16th International Symposium on Biomedical Imaging (ISBI)

    The IEEE International Symposium on Biomedical Imaging (ISBI) is the premier forum for the presentation of technological advances in theoretical and applied biomedical imaging.ISBI 2019 will be the 16th meeting in this series. The previous meetings have played a leading role in facilitating interaction between researchers in medical and biological imaging. The 2019 meeting will continue this tradition of fostering cross fertilization among different imaging communities and contributing to an integrative approach to biomedical imaging across all scales of observation.

  • 2018 IEEE 15th International Symposium on Biomedical Imaging (ISBI 2018)

    The IEEE International Symposium on Biomedical Imaging (ISBI) is the premier forum for the presentation of technological advances in theoretical and applied biomedical imaging. ISBI 2018 will be the 15th meeting in this series. The previous meetings have played a leading role in facilitating interaction between researchers in medical and biological imaging. The 2018 meeting will continue this tradition of fostering crossfertilization among different imaging communities and contributing to an integrative approach to biomedical imaging across all scales of observation.

  • 2017 IEEE 14th International Symposium on Biomedical Imaging (ISBI 2017)

    The IEEE International Symposium on Biomedical Imaging (ISBI) is the premier forum for the presentation of technological advances in theoretical and applied biomedical imaging. ISBI 2017 will be the 14th meeting in this series. The previous meetings have played a leading role in facilitating interaction between researchers in medical and biological imaging. The 2017 meeting will continue this tradition of fostering crossfertilization among different imaging communities and contributing to an integrative approach to biomedical imaging across all scales of observation.

  • 2016 IEEE 13th International Symposium on Biomedical Imaging (ISBI 2016)

    The IEEE International Symposium on Biomedical Imaging (ISBI) is the premier forumfor the presentation of technological advances in theoretical and applied biomedical imaging. ISBI 2016 willbe the thirteenth meeting in this series. The previous meetings have played a leading role in facilitatinginteraction between researchers in medical and biological imaging. The 2016 meeting will continue thistradition of fostering crossfertilization among different imaging communities and contributing to an integrativeapproach to biomedical imaging across all scales of observation.

  • 2015 IEEE 12th International Symposium on Biomedical Imaging (ISBI 2015)

    The IEEE International Symposium on Biomedical Imaging (ISBI) is the premier forum for the presentation of technological advances in theoretical and applied biomedical imaging. ISBI 2015 will be the 12th meeting in this series. The previous meetings have played a leading role in facilitating interaction between researchers in medical and biological imaging. The 2014 meeting will continue this tradition of fostering crossfertilization among different imaging communities and contributing to an integrative approach to biomedical imaging across all scales of observation.

  • 2014 IEEE 11th International Symposium on Biomedical Imaging (ISBI 2014)

    The IEEE International Symposium on Biomedical Imaging (ISBI) is the premier forum for the presentation of technological advances in theoretical and applied biomedical imaging. ISBI 2014 will be the eleventh meeting in this series. The previous meetings have played a leading role in facilitating interaction between researchers in medical and biological imaging. The 2014 meeting will continue this tradition of fostering crossfertilization among different imaging communities and contributing to an integrative approach to biomedical imaging across all scales of observation.

  • 2013 IEEE 10th International Symposium on Biomedical Imaging (ISBI 2013)

    To serve the biological, biomedical, bioengineering, bioimaging and other technical communities through a quality program of presentations and papers on the foundation, application, development, and use of biomedical imaging.

  • 2012 IEEE 9th International Symposium on Biomedical Imaging (ISBI 2012)

    To serve the biological, biomedical, bioengineering, bioimaging, and other technical communities through a quality program of presentations and papers on the foundation, application, development, and use of biomedical imaging.

  • 2011 IEEE 8th International Symposium on Biomedical Imaging (ISBI 2011)

    To serve the biological, biomedical, bioengineering, bioimaging, and other technical communities through a quality program of presentations and papers on the foundation, application, development, and use of biomedical imaging.

  • 2010 IEEE 7th International Symposium on Biomedical Imaging (ISBI 2010)

    To serve the biological, biomedical, bioengineering, bioimaging, and other technical communities through a quality program of presentations and papers on the foundation, application, development, and use of biomedical imaging.

  • 2009 IEEE 6th International Symposium on Biomedical Imaging (ISBI 2009)

    Algorithmic, mathematical and computational aspects of biomedical imaging, from nano- to macroscale. Topics of interest include image formation and reconstruction, computational and statistical image processing and analysis, dynamic imaging, visualization, image quality assessment, and physical, biological and statistical modeling. Molecular, cellular, anatomical and functional imaging modalities and applications.

  • 2008 IEEE 5th International Symposium on Biomedical Imaging (ISBI 2008)

    Algorithmic, mathematical and computational aspects of biomedical imaging, from nano- to macroscale. Topics of interest include image formation and reconstruction, computational and statistical image processing and analysis, dynamic imaging, visualization, image quality assessment, and physical, biological and statistical modeling. Molecular, cellular, anatomical and functional imaging modalities and applications.

  • 2007 IEEE 4th International Symposium on Biomedical Imaging: Macro to Nano (ISBI 2007)

  • 2006 IEEE 3rd International Symposium on Biomedical Imaging: Macro to Nano (ISBI 2006)

  • 2004 2nd IEEE International Symposium on Biomedical Imaging: Macro to Nano (ISBI 2004)

  • 2002 1st IEEE International Symposium on Biomedical Imaging: Macro to Nano (ISBI 2002)


2020 IEEE International Conference on Image Processing (ICIP)

The International Conference on Image Processing (ICIP), sponsored by the IEEE SignalProcessing Society, is the premier forum for the presentation of technological advances andresearch results in the fields of theoretical, experimental, and applied image and videoprocessing. ICIP 2020, the 27th in the series that has been held annually since 1994, bringstogether leading engineers and scientists in image and video processing from around the world.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


2020 IEEE International Magnetic Conference (INTERMAG)

INTERMAG is the premier conference on all aspects of applied magnetism and provides a range of oral and poster presentations, invited talks and symposia, a tutorial session, and exhibits reviewing the latest developments in magnetism.


More Conferences

Periodicals related to Bones

Back to Top

Antennas and Wireless Propagation Letters, IEEE

IEEE Antennas and Wireless Propagation Letters (AWP Letters) will be devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation.


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Computer Graphics and Applications, IEEE

IEEE Computer Graphics and Applications (CG&A) bridges the theory and practice of computer graphics. From specific algorithms to full system implementations, CG&A offers a strong combination of peer-reviewed feature articles and refereed departments, including news and product announcements. Special Applications sidebars relate research stories to commercial development. Cover stories focus on creative applications of the technology by an artist or ...


Control Systems Technology, IEEE Transactions on

Serves as a compendium for papers on the technological advances in control engineering and as an archival publication which will bridge the gap between theory and practice. Papers will highlight the latest knowledge, exploratory developments, and practical applications in all aspects of the technology needed to implement control systems from analysis and design through simulation and hardware.


Design & Test of Computers, IEEE

IEEE Design & Test of Computers offers original works describing the methods used to design and test electronic product hardware and supportive software. The magazine focuses on current and near-future practice, and includes tutorials, how-to articles, and real-world case studies. Topics include IC/module design, low-power design, electronic design automation, design/test verification, practical technology, and standards. IEEE Design & Test of ...


More Periodicals


Xplore Articles related to Bones

Back to Top

How to Use the IEEEtran LaTeX Class

IEEE Design & Test, None

This article describes how to use the IEEEtran class with LaTeX to produce high quality typeset papers that are suitable for submission to the Institute of Electrical and Electronics Engineers (IEEE). IEEEtran can produce conference, journal and technical note (correspondence) papers with a suitable choice of class options. This document was produced using IEEEtran in journal mode.


High-tech dig for a dinosaur

IEEE Spectrum, 1989

The use of remote sensing to uncover the skeleton of the seismosaurus, a dinosaur at least 37 meters long, is discussed. Most of the seismosaurus skeleton is believed to lie under 3 to 5 m of sandstone, in a government preserve, so the dig must disturb the environment as little as possible. The techniques being used are radar, magnetometry, gamma ...


Holographic deformation analysis of the human femur

2001 Conference Proceedings of the 23rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2001

The deformations of the neck and head of the human dried femur were measured and analyzed with loads applied at the femoral head. Particular attention was paid to measurements of bones with osteoporosis. We used double exposures or real-time holographic interferometry to measure precisely. The distal part of each femur was embedded in super hard plaster, and the load was ...


Smooth Uncemented Femoral Stems Do Not Provide Torsional Stability Of Femurs With Cortical Defects

Proceedings of the 17th Southern Biomedical Engineering Conference, 1998

None


Question classification for medical domain Question Answering system

2016 IEEE International WIE Conference on Electrical and Computer Engineering (WIECON-ECE), 2016

Question classification plays an important role in question answering system. It helps in finding or constructing accurate answers and hence improves the quality of Question Answering systems. The question classification approaches generally used are: Rule based, Machine learning and Hybrid. This paper presents our research work on question classification through rule based approach. The question processing module helps in assigning ...


More Xplore Articles

Educational Resources on Bones

Back to Top

IEEE.tv Videos

No IEEE.tv Videos are currently tagged "Bones"

IEEE-USA E-Books

  • How to Use the IEEEtran LaTeX Class

    This article describes how to use the IEEEtran class with LaTeX to produce high quality typeset papers that are suitable for submission to the Institute of Electrical and Electronics Engineers (IEEE). IEEEtran can produce conference, journal and technical note (correspondence) papers with a suitable choice of class options. This document was produced using IEEEtran in journal mode.

  • High-tech dig for a dinosaur

    The use of remote sensing to uncover the skeleton of the seismosaurus, a dinosaur at least 37 meters long, is discussed. Most of the seismosaurus skeleton is believed to lie under 3 to 5 m of sandstone, in a government preserve, so the dig must disturb the environment as little as possible. The techniques being used are radar, magnetometry, gamma rays and acoustic tomography.<<ETX>>

  • Holographic deformation analysis of the human femur

    The deformations of the neck and head of the human dried femur were measured and analyzed with loads applied at the femoral head. Particular attention was paid to measurements of bones with osteoporosis. We used double exposures or real-time holographic interferometry to measure precisely. The distal part of each femur was embedded in super hard plaster, and the load was applied at the femoral head. In order to better simulate the situation of a femur under physiological muscles, we used the 3D finite element method (FEM) for our analyses. After modeling the femur, which consisted of meshing as eight noded elements for each section of diaphysis, we used the 3D FEM to calculate stress and strain. We obtained the following results : (1)the deformations increased with the progress of osteoporosis;(2) femur with osteoporosis showed obvious rotational components in the femoral shaft and (3) a compressive stress distribution could be found at the medial side of the diaphyseal region by using the FEM.

  • Smooth Uncemented Femoral Stems Do Not Provide Torsional Stability Of Femurs With Cortical Defects

    None

  • Question classification for medical domain Question Answering system

    Question classification plays an important role in question answering system. It helps in finding or constructing accurate answers and hence improves the quality of Question Answering systems. The question classification approaches generally used are: Rule based, Machine learning and Hybrid. This paper presents our research work on question classification through rule based approach. The question processing module helps in assigning a suitable question category and identifying the keywords from the given input question. A prototype system based on the proposed method has been constructed and the experiment on 500 medical questions collected from patients and doctors has been carried out. Using the two layered taxonomy of 6 course grain and 50 fine grained categories developed by Li and Roth, we have classified the questions into various categories. We have also studied the syntactic structure of the question and suggest the syntactic patterns for particular category of questions. Using these question patterns we have classified the question into particular category. In this paper we have proposed a compact and effective method for question classification. The experimental output shows that even with small set of question categories we can classify the questions with more satisfactory and better result.

  • Cytogenetic Observations on Thymidine Synchronized Bovine Lymphocytes Exposed to 7.25 GHz Microwaves

    Thymidine synchronized bovine lymphocytes were exposed in the S phase to 7.25 GHz microwaves by means of a waveguide system. The exposures were 1 hour long and the temperature rise was less than 1°C. No specific effect of microwaves was evidenced, but chromosome breaks occurred following either microwave or conventional heating. Thymidine alone was found to induce polyploidy and the 1°C heating seems to reduce this effect.

  • Mueller-matrix tomography of biotissue

    Summary form only given. The polarization tomography features of optically anisotropic architectonic nets of different morphological structure biotissues (BT) have been investigated. The phase tomography (PT) features of skin derma, muscular and bone BT have been experimentally investigated. The interrelation between the PT structure and BT physiological state has been determined. The early diagnostics criteria of the degenerative-dystrophic appearance and pathological changes of the structure of BT optically anisotropic architectonics have been determined: (i) Optical anisotropy of physiologically normal myometry is not practically apparent- the PTs represent a quasi- homogeneous field with several fluctuations /spl Delta/n(X,Y) /spl ap/ 10/sup -5/. This points to a rather amorphous optical structure of BT, i.e., to "lack of development" of myometry collagen net. (ii) The phase component topology of the diffusely changed myometry architectonics is formed by the areas with inhomogeneous distribution of birefringence /spl Delta/n(X,Y), the values of which vary from 1.2 /spl times/ 10/sup -4/ to 1.1 /spl times/ 10/sup -3/ respectively. (iii) The tumor-forming processes are accompanied by the formation of "anisotropy zones", within which the birefringence value of architectonics increases by two orders and reaches the level of 2.5 /spl times/ 10/sup -3/.

  • Three-Dimensional Finite Element Analysis of the Tibia Stresses during Jumping Momnet

    In this study, the kinematic and dynamic parameters were obtained by using the photogrammetric techniques and three-dimensional force platform in jumping moment for foot, the force and moment acted on the tibia were calculated with inverse dynamics method, the three-dimensional finite element model of tibia that considers material property and geometric behavior was established by CT datum, and stress and displacement of tibia were simulated, the results can provide a theoretical basis for sports training during the sports injury prevention and treatment. The results showed that: the stress acted on the tibia supported is greater, maximum stress value is 46.88MPa, which concentrated in the middle of the tibia, and front tibial stress value is higher than the rear, front edge of the tibia situated in the bend and compression at the moment. If the horizontal braking force is too large, the tibia can situate alternating stress state, which can lead to fatigue damage for long time. The three-dimensional finite element model simulated the structure and property of tibia, the model is very accurate and credible, which can be output by different format, as STL and IGES etc, which realized the data sharing.

  • Mechatronics modeling of a branching tendon-driven robot

    This paper presents the mechatronic design of a new tendon-driven manipulator. The new design is capable of many dexterous grasping and manipulation tasks. The principle design is to use the new branching tendons to control bones which are found in musculoskeletal systems. In branching tendons, multiple tendons are connected at a point. Reducing the number of actuators in the branching tendons makes a lightweight arm. The kinematic and the dynamic analysis of the under-actuated manipulator are carried out in a mechatronic simulation. A three link manipulator simulated on contact problem with the disturbance force. The tension in branched tendon is investigated to show the ability of back bone manipulators including the pretension.

  • Image-guided manipulator compliant surgical planning methodology for robotic skull-base surgery

    In robotic skull-base surgery, a surgical navigation and planning station is used to plan the path to be taken by the bone removal tool which is carried by a robotic manipulator. In planning for such a path, considerations have to be taken in terms of the manipulator characteristics and the geometric properties of the bone removal tool used. Presented in this paper is a methodology which takes into account the required efficacy of surgical planning. Differing from other surgical planning methodologies, the final output of the planned surgery can be directly executed by a surgical robot (NeuRobot). In doing so, the surgeon has only to specify the region or features within the skull-base which are to be avoided and the general direction of action which specifies the eventual path that the surgery is to be carried out. A novel approach is taken by the use of Voronoi maps to identify "safe" cavities on each image slice.



Standards related to Bones

Back to Top

No standards are currently tagged "Bones"