Conferences related to Bridges

Back to Top

2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019 - ECCE Asia)

1. Power Electronic Devices (Si and Wide band-gap) and Applications, 2. Power electronic packaging and integration, 3. Modeling, Simulation and EMI, 4. Lighting Technologies and Applications, 5. Wireless Power Transfer, 6. Uncontrolled Rectifiers and AC/DC Converters, 7. AC/AC Converters, 8. DC/AC Inverters, 9. DC/DC Converters, 10. Multilevel Power Converters, 11. Electric Machines, Actuators and Sensors, 12. Motor Control and Drives, 13. Sensorless and Sensor-Reduction Control, 14. Renewable Energy and Distributed Generation Systems, 15. Smart/Micro Grid, 16. DC Distribution 17. Power Quality (or Power Electronics for Utility Interface), 18. Energy Storage and Management Systems, 19. Power Electronics for Transportation Electrification, 20. Reliability, diagnosis, prognosis and protection, 21. High Voltage DC Transmission, 22. Other Selected Topics in Power Electronics

  • 2015 IEEE 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia)

    Power electronics, renewable energy, electric vehicle, smart grid

  • 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 ECCE-ASIA)

    The seventh International Power Electronics Conference, IPEC-Hiroshima 2014 -ECCE Asia-, will be held from May 18 to May 21, 2014 in Hiroshima, Japan. The conference venue will be the International Conference Center Hiroshima, which is located in Hiroshima Peace Memorial Park. Power electronics has been providing numerous new technologies in the fields of electric energy conversion and motor drive systems for more than 40 years. In recent years, global energy and environmental issues are becoming more serious and power electronics is expected to play a key role in solving such problems. The IPEC-Hiroshima 2014 -ECCE Asia- will provide a unique opportunity for researchers, engineers, and academics from all over the world to present and exchange the latest information on power electronics, motor drives, and related subjects.

  • 2011 IEEE 8th International Conference on Power Electronics & ECCE Asia (ICPE 2011- ECCE Asia)

    01. Power Semiconductor Devices and Packaging 02. Modeling, Simulation, EMI and Reliability 03. Electric Machines, Actuators and Sensors 04. Motor Control and Drives 05. Sensorless Control 06. Renewable Green Energy (Wind, Solar, Tidal Power Generation) 07. Micro Grid and Distributed Generation 08. Electric Propulsion System (EV, Train, Electric Ship) 09. Electric and Hybrid Vehicles 10. Power Supplies and EV Chargers 11. Power Electronics and Drives for Home Appliance 12. Power Elect

  • 2007 7th International Conference on Power Electronics (ICPE)

    - Power Semiconductor Devices - DC-DC Converters - Inverters and Inverter Control Techniques - Motor Drives - Rectifiers and AC-AC Converters - Renewable Energy - Power Quality and Utility Applications - Automotive Applications and Traction Drives - Energy Storage - Control Techniques Applied to Power Electronics - Modeling, Analysis, and Simulation - Consumer Applications - Other Power Applications


2019 21st European Conference on Power Electronics and Applications (EPE '19 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2019 IEEE 15th International Conference on Automation Science and Engineering (CASE)

The conference is the primary forum for cross-industry and multidisciplinary research in automation. Its goal is to provide a broad coverage and dissemination of foundational research in automation among researchers, academics, and practitioners.


2019 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. The conference addresses issues of immediate and long term importance to practicing power electronics engineer.


2019 IEEE Energy Conversion Congress and Exposition (ECCE)

IEEE-ECCE 2019 brings together practicing engineers, researchers, entrepreneurs and other professionals for interactive and multi-disciplinary discussions on the latest advances in energy conversion technologies. The Conference provides a unique platform for promoting your organization.

  • 2018 IEEE Energy Conversion Congress and Exposition (ECCE)

    The scope of ECCE 2018 includes all technical aspects of research, design, manufacture, application and marketing of devices, components, circuits and systems related to energyconversion, industrial power and power electronics.

  • 2017 IEEE Energy Conversion Congress and Exposition (ECCE)

    ECCE is the premier global conference covering topics in energy conversion from electric machines, power electronics, drives, devices and applications both existing and emergent

  • 2016 IEEE Energy Conversion Congress and Exposition (ECCE)

    The Energy Conversion Congress and Exposition (ECCE) is focused on research and industrial advancements related to our sustainable energy future. ECCE began as a collaborative effort between two societies within the IEEE: The Power Electronics Society (PELS) and the Industrial Power Conversion Systems Department (IPCSD) of the Industry Application Society (IAS) and has grown to the premier conference to discuss next generation technologies.

  • 2015 IEEE Energy Conversion Congress and Exposition

    The scope of ECCE 2015 includes all technical aspects of research, design, manufacture, application and marketing of devices, components, circuits and systems related to energy conversion, industrial power and power electronics.

  • 2014 IEEE Energy Conversion Congress and Exposition (ECCE)

    Those companies who have an interest in selling to: research engineers, application engineers, strategists, policy makers, and innovators, anyone with an interest in energy conversion systems and components.

  • 2013 IEEE Energy Conversion Congress and Exposition (ECCE)

    The scope of the congress interests include all technical aspects of the design, manufacture, application and marketing of devices, components, circuits and systems related to energy conversion, industrial power conversion and power electronics.

  • 2012 IEEE Energy Conversion Congress and Exposition (ECCE)

    The IEEE Energy Conversion Congress and Exposition (ECCE) will be held in Raleigh, the capital of North Carolina. This will provide a forum for the exchange of information among practicing professionals in the energy conversion business. This conference will bring together users and researchers and will provide technical insight as well.

  • 2011 IEEE Energy Conversion Congress and Exposition (ECCE)

    IEEE 3rd Energy Conversion Congress and Exposition follows the inagural event held in San Jose, CA in 2009 and 2nd meeting held in Atlanta, GA in 2010 as the premier conference dedicated to all aspects of energy processing in industrial, commercial, transportation and aerospace applications. ECCE2011 has a strong empahasis on renewable energy sources and power conditioning, grid interactions, power quality, storage and reliability.

  • 2010 IEEE Energy Conversion Congress and Exposition (ECCE)

    This conference covers all areas of electrical and electromechanical energy conversion. This includes power electrics, power semiconductors, electric machines and drives, components, subsystems, and applications of energy conversion systems.

  • 2009 IEEE Energy Conversion Congress and Exposition (ECCE)

    The scope of the conference include all technical aspects of the design, manufacture, application and marketing of devices, circuits, and systems related to electrical energy conversion technology


More Conferences

Periodicals related to Bridges

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Circuits and Systems I: Regular Papers, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


More Periodicals

Most published Xplore authors for Bridges

Back to Top

No authors for "Bridges"


Xplore Articles related to Bridges

Back to Top

Containerisation of Oceanographic Equipment

OCEANS '87, 1987

Large scale containerisation results in an optimal use of oceanographic equipment. Containerisation leads to a reduction in the building costs of research platforms. On a national and an international level containerisation allows a more efficient and cost-beneficial use of oceanographic equipment. Increased application of containerised equipment will result in the development of a full range of interchangeable modules. In the ...


Discussion on “the engineer's activity in public affairs — Public utility commissions and franchise valuations”, at New York, April 10, 1908

Proceedings of the American Institute of Electrical Engineers, 1908

George S. Coleman: In one respect I agree with Mr. Floy, engineers as a class are, perhaps, a little too modest; but I do not quite agree that engineers ought to be considered in any wise responsible for matters which are hard enough for other men to handle, men who are devoting all their time to it. I do think, ...


Inspection Trips at Convention

Proceedings of the Institute of Radio Engineers, 1929

None


Transmission characteristics of bell system subscriber loop plant

Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics, 1963

This paper discusses some principal results of a recent Bell System subscriber loop survey. Statistically sound estimates of various physical and transmission characteristics of the loop plant are presented. This information is useful in appraising the current transmission properties of the plant in the light of existing requirements. It provides a novel basis for evaluating new developments and services affecting ...


Crowdsensing Framework for Monitoring Bridge Vibrations Using Moving Smartphones

Proceedings of the IEEE, 2018

Cities are encountering extensive deficits in infrastructure service while they are experiencing rapid technological advancements and overhauls in transportation systems. Standard bridge evaluation methods rely on visual inspections, which are infrequent and subjective, ultimately affecting the structural assessments on which maintenance plans are based. The operational behavior of a bridge must be observed more regularly and over an extended period ...


More Xplore Articles

Educational Resources on Bridges

Back to Top

IEEE-USA E-Books

  • Containerisation of Oceanographic Equipment

    Large scale containerisation results in an optimal use of oceanographic equipment. Containerisation leads to a reduction in the building costs of research platforms. On a national and an international level containerisation allows a more efficient and cost-beneficial use of oceanographic equipment. Increased application of containerised equipment will result in the development of a full range of interchangeable modules. In the long run this can lead to an exchange of equipment within a European framework.

  • Discussion on “the engineer's activity in public affairs — Public utility commissions and franchise valuations”, at New York, April 10, 1908

    George S. Coleman: In one respect I agree with Mr. Floy, engineers as a class are, perhaps, a little too modest; but I do not quite agree that engineers ought to be considered in any wise responsible for matters which are hard enough for other men to handle, men who are devoting all their time to it. I do think, however, that the time has come when groups of engineers, different kinds of engineers, should give the benefit of their concerted thought and action to any public question on which they are supposed to be especially well informed. In the case of a new bridge across any of our rivers, or a new subway, or a new elevated railroad, in fact any kind of engineering work likely to affect the public, this Institute, and every body of engineers who in any way might be related to that enterprise, should be heard officially. If Mr. Floy's suggestion this evening shall encourage among engineers the habit of not merely quiet, independent thought in their work, but concerted action after discussion, he will have accomplished a notable result.

  • Inspection Trips at Convention

    None

  • Transmission characteristics of bell system subscriber loop plant

    This paper discusses some principal results of a recent Bell System subscriber loop survey. Statistically sound estimates of various physical and transmission characteristics of the loop plant are presented. This information is useful in appraising the current transmission properties of the plant in the light of existing requirements. It provides a novel basis for evaluating new developments and services affecting present plant.

  • Crowdsensing Framework for Monitoring Bridge Vibrations Using Moving Smartphones

    Cities are encountering extensive deficits in infrastructure service while they are experiencing rapid technological advancements and overhauls in transportation systems. Standard bridge evaluation methods rely on visual inspections, which are infrequent and subjective, ultimately affecting the structural assessments on which maintenance plans are based. The operational behavior of a bridge must be observed more regularly and over an extended period in order to sufficiently track its condition and avoid unexpected rehabilitation. Mobile sensor networks are conducive to monitoring bridges vibrations routinely, with benefits that have been demonstrated in recent structural health monitoring (SHM) research. Though smartphone accelerometers are imperfect sensors, they can contribute valuable information to SHM, especially when aggregated, e.g., via crowdsourcing. In an application on the Harvard Bridge (Boston, MA), it is shown that acceleration data collected using smartphones in moving vehicles contained consistent and significant indicators of the first three modal frequencies of the bridge. In particular, the results became more precise when informatics from several smartphone datasets were combined. This evidence is the first to support the hypothesis that smartphone data, collected within vehicles passing over a bridge, can be used to detect several modal frequencies of the bridge. The result defines an opportunity for local governments to make partnerships that encourage the collection of low-cost bridge vibration data, which can contribute to more effective management and informed decision-making.

  • Cost effective network adapters

    None

  • Creating A Virtual Bridge To Reality: The Latest Uses Of Virtual Reality For Mental Health

    None

  • STRUCTURAL HEALTH MONITORING

    This chapter presents the authors’ firsthand experience at designing and implementing a structural health monitoring (SHM) solution for bridges. It is intended as a case of practicing the engineering approach on Internet of Things (IoT) and smart infrastructure. The chapter refers each edge sensor device as a Bridge Monitoring Unit (BMU). The BMU will be deployed directly on bridges. The system needs to be able to withstand direct exposure to all sorts of weather conditions. The BMU is required to: perform passive monitoring; support both wired and wireless connectivity; and monitor both dynamic and static parameters. Dynamic parameters include acceleration in three axes and inclination in two axes. Static parameters include water level, water velocity, and structure temperature. The BMU should be able to tolerate intermittent wireless connectivity to server, as 3G connections are known to drop often. In the case of unreliable connectivity, data transmission to server should resume when connectivity is restored.

  • Real Time Ekofisk Subsidence Rates From Monthly Satellite Measurements

    None

  • Move into Multiple Dimensions with Multimodal Attending

    This chapter contains sections titled: * Multimodal Attending Defined * Sensory Processing Defined * Affective Processing Defined * Cognitive Processing Defined * Check In * Contextual Integration of Multimodal Attending



Standards related to Bridges

Back to Top

IEEE Application Guide for Distributed Digital Control and Monitoring for Power Plants


IEEE Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit Systems

This recommended practice provides overhead contact system maintenance practices and procedures including maintenance techniques, site inspection and test procedures, and maintenance tolerances, for heavy rail, light rail, and trolley bus systems.


IEEE Standard for Local and Metropolitan Area Networks Virtual Bridged Local Area Networks Amendment 5: Connectivity Fault Management

This standard specifies protocols, procedures, and managed objects to support transport fault management. These allow discovery and verification of the path, through bridges and LANs, taken for frames addressed to and from specified network users, detection, and isolation of a connectivity fault to a specific bridge or LAN.


IEEE Standard for Local and metropolitan area networks-- Virtual Bridged Local Area Networks Amendment 10: Provider Backbone Bridge Traffic Engineering

Insert the following text and bullets immediately after bullet z re-lettering as needed: This standard specifies protocols, procedures, and managed objects to allow support of provisioning systems that explicitly select traffic engineered paths within Provider Backbone Bridged Networks by allowing a network operator to disable unknown destination address forwarding, source address learning and spanning tree protocols for administratively selected VLAN ...


IEEE Standard for Local and metropolitan area networks-- Virtual Bridged Local Area Networks Amendment 12: Forwarding and Queuing Enhancements for Time-Sensitive Streams


More Standards