Conferences related to Cable insulation

Back to Top

2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 IEEE Power & Energy Society General Meeting (PESGM)

The Annual IEEE PES General Meeting will bring together over 2900 attendees for technical sessions, administrative sessions, super sessions, poster sessions, student programs, awards ceremonies, committee meetings, tutorials and more


2020 IEEE/PES Transmission and Distribution Conference and Exposition (T&D)

Bi-Annual IEEE PES T&D conference. Largest T&D conference in North America.


2019 10th International Conference on Power Electronics and ECCE Asia (ICPE 2019 - ECCE Asia)

1. Power Electronic Devices (Si and Wide band-gap) and Applications, 2. Power electronic packaging and integration, 3. Modeling, Simulation and EMI, 4. Lighting Technologies and Applications, 5. Wireless Power Transfer, 6. Uncontrolled Rectifiers and AC/DC Converters, 7. AC/AC Converters, 8. DC/AC Inverters, 9. DC/DC Converters, 10. Multilevel Power Converters, 11. Electric Machines, Actuators and Sensors, 12. Motor Control and Drives, 13. Sensorless and Sensor-Reduction Control, 14. Renewable Energy and Distributed Generation Systems, 15. Smart/Micro Grid, 16. DC Distribution 17. Power Quality (or Power Electronics for Utility Interface), 18. Energy Storage and Management Systems, 19. Power Electronics for Transportation Electrification, 20. Reliability, diagnosis, prognosis and protection, 21. High Voltage DC Transmission, 22. Other Selected Topics in Power Electronics

  • 2015 IEEE 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia)

    Power electronics, renewable energy, electric vehicle, smart grid

  • 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 ECCE-ASIA)

    The seventh International Power Electronics Conference, IPEC-Hiroshima 2014 -ECCE Asia-, will be held from May 18 to May 21, 2014 in Hiroshima, Japan. The conference venue will be the International Conference Center Hiroshima, which is located in Hiroshima Peace Memorial Park. Power electronics has been providing numerous new technologies in the fields of electric energy conversion and motor drive systems for more than 40 years. In recent years, global energy and environmental issues are becoming more serious and power electronics is expected to play a key role in solving such problems. The IPEC-Hiroshima 2014 -ECCE Asia- will provide a unique opportunity for researchers, engineers, and academics from all over the world to present and exchange the latest information on power electronics, motor drives, and related subjects.

  • 2011 IEEE 8th International Conference on Power Electronics & ECCE Asia (ICPE 2011- ECCE Asia)

    01. Power Semiconductor Devices and Packaging 02. Modeling, Simulation, EMI and Reliability 03. Electric Machines, Actuators and Sensors 04. Motor Control and Drives 05. Sensorless Control 06. Renewable Green Energy (Wind, Solar, Tidal Power Generation) 07. Micro Grid and Distributed Generation 08. Electric Propulsion System (EV, Train, Electric Ship) 09. Electric and Hybrid Vehicles 10. Power Supplies and EV Chargers 11. Power Electronics and Drives for Home Appliance 12. Power Elect

  • 2007 7th International Conference on Power Electronics (ICPE)

    - Power Semiconductor Devices - DC-DC Converters - Inverters and Inverter Control Techniques - Motor Drives - Rectifiers and AC-AC Converters - Renewable Energy - Power Quality and Utility Applications - Automotive Applications and Traction Drives - Energy Storage - Control Techniques Applied to Power Electronics - Modeling, Analysis, and Simulation - Consumer Applications - Other Power Applications


2019 IEEE Electrical Insulation Conference (EIC)

Electrical Materials, Equipment, Testing, Nanotechnologies, Power Systems, Motors, Generators, Transformers, Switchgear


More Conferences

Periodicals related to Cable insulation

Back to Top

Aerospace and Electronic Systems Magazine, IEEE

The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.


Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Communications, IEEE Transactions on

Telephone, telegraphy, facsimile, and point-to-point television, by electromagnetic propagation, including radio; wire; aerial, underground, coaxial, and submarine cables; waveguides, communication satellites, and lasers; in marine, aeronautical, space and fixed station services; repeaters, radio relaying, signal storage, and regeneration; telecommunication error detection and correction; multiplexing and carrier techniques; communication switching systems; data communications; and communication theory. In addition to the above, ...


Dielectrics and Electrical Insulation, IEEE Transactions on

Electrical insulation common to the design and construction of components and equipment for use in electric and electronic circuits and distribution systems at all frequencies.


More Periodicals

Most published Xplore authors for Cable insulation

Back to Top

Xplore Articles related to Cable insulation

Back to Top

Fiber Optic Installation

Fiber Optic Installation, 12/14/2009

Whether your installation is for short distance campus environments, long distance underground, aerial placement or a specialized installation such as submarine, air blown fiber, or pressurized cable, the use of fiber optic cable requires proper techniques for a successful installation. Today's installers and designers must address building codes and standards, environmental issues, proper design, routing, and equipment for installations involving ...


Fiber Optic Cable - Fiber Optic Cables, Applications, and Manufacturing

Fiber Optic Cable - Fiber Optic Cables, Applications, and Manufacturing, 12/14/2009

In this tutorial we will begin with an introduction to the cabling process and the variations in cable structures that have been developed for the physical protection of the internal fiber structures. You will learn about cable structures for aerial, ducted, buried, underground premise and industrial environments. Next, loose buffered cables and tight buffered cables will be reviewed. Finally, the ...


Fabrication and performance of a new high-gradient trim quadrupole for the Fermilab luminosity upgrade

Conference Record of the 1991 IEEE Particle Accelerator Conference, 1991

A series of 16 high-gradient trim quadrupole magnets has been designed and built for the Tevatron luminosity upgrade (Fermilab III). These quadrupoles form part of the new-low-beta system for the two interaction regions in the Tevatron Collider. The magnets have been installed in the Tevatron lattice in anticipation of the 1991 collider run. The one-shell design uses a 'cable' of ...


Near surface earth electrical parameters inferred from insulted dipole impedance measurements at frequencies of 0.5 to 20 mhz

1984 Antennas and Propagation Society International Symposium, 1984

The imput impedance of a symmetrical insulated buried horizontal dipole (61.5 feet of type RG59B cable) has been measured over the frequency range of 0.5 to 20 MHz. Five zero reactance points (resonances) were observed in this range. A transmission line description of this configuration will be presented which accounts for the effect of finite burial depth on the complex ...


Digest report of investigation committee on on-line diagnosis for electrical equipments

Proceedings of 2005 International Symposium on Electrical Insulating Materials, 2005. (ISEIM 2005)., 2005

None


More Xplore Articles

Educational Resources on Cable insulation

Back to Top

IEEE-USA E-Books

  • Fiber Optic Installation

    Whether your installation is for short distance campus environments, long distance underground, aerial placement or a specialized installation such as submarine, air blown fiber, or pressurized cable, the use of fiber optic cable requires proper techniques for a successful installation. Today's installers and designers must address building codes and standards, environmental issues, proper design, routing, and equipment for installations involving fiber optic cable. Topologies, applications and reliability concerns must be addressed. This video covers these issues and many more involving the proper placement of optical communication systems for LANs, WANs and MANs.

  • Fiber Optic Cable - Fiber Optic Cables, Applications, and Manufacturing

    In this tutorial we will begin with an introduction to the cabling process and the variations in cable structures that have been developed for the physical protection of the internal fiber structures. You will learn about cable structures for aerial, ducted, buried, underground premise and industrial environments. Next, loose buffered cables and tight buffered cables will be reviewed. Finally, the cabling process from acceptance to final cable testing will be reviewed. After completing this tutorial you should have an understanding of: An introduction to the cabling process; Cable applications; Loose buffered cables; Tight buffered cables; Cable manufacturing.

  • Fabrication and performance of a new high-gradient trim quadrupole for the Fermilab luminosity upgrade

    A series of 16 high-gradient trim quadrupole magnets has been designed and built for the Tevatron luminosity upgrade (Fermilab III). These quadrupoles form part of the new-low-beta system for the two interaction regions in the Tevatron Collider. The magnets have been installed in the Tevatron lattice in anticipation of the 1991 collider run. The one-shell design uses a 'cable' of individually insulated rectangular strands. The cable is overwrapped with Kapton and epoxy impregnated glass tape. The winding, curing, and collaring of the magnet is accomplished in the same manner as Tevatron-like magnets using Rutherford-style cable. Once the magnet is assembled, the five strands are connected in series to achieve high gradient at low current. The required gradient is 0.63 T/cm at 1086 A. The production magnets reached maximum currents of about 1.1 T/cm at 1990 A. The success of this design approach suggests other applications in beam transport where magnets of high performance and low operating cost are required.<<ETX>>

  • Near surface earth electrical parameters inferred from insulted dipole impedance measurements at frequencies of 0.5 to 20 mhz

    The imput impedance of a symmetrical insulated buried horizontal dipole (61.5 feet of type RG59B cable) has been measured over the frequency range of 0.5 to 20 MHz. Five zero reactance points (resonances) were observed in this range. A transmission line description of this configuration will be presented which accounts for the effect of finite burial depth on the complex propagation constant and characteristic impedance of the wire without restrictions on the size of the loss tangent of the (assumed) uniform electrical properties of the half space. It is shown that a particular frequency variation of the dielectric permitivity and conductivity produce a good fit between the theoretically predicted and measured impedance data. The earth parameters thus derived are compared with a model proposed by C. Longmire and K. Smith.

  • Digest report of investigation committee on on-line diagnosis for electrical equipments

    None

  • Tendency of R&amp;D on dielectric and electrical insulation materials at university laboratories in Korea

    Various types of insulation materials, which have been used in the electrical insulation of power delivery system, are discussed with a viewpoint on power cable and insulators in Korea and the tendency of research and development on dielectric and electrical insulation materials at university laboratory in Korea is also proposed and the research and development activities on these materials which have been widely studied are introduced in this summary.

  • Condition assessment of XLPE cable insulation using short-time polarisation and depolarisation current measurements

    The authors describe how a commercially available test set has been used to make preliminary determinations of condition of medium voltage underground power cables with extended cross-linked polyethylene cable insulation at remote sites in north-east Queensland. Polarisation and depolarisation currents are measured with an injection voltage of 1 and 5 kV with observed polarisation and depolarisation periods of 600 and 60 s, respectively. The condition of cables is estimated on the basis of a newly defined apparent conductivity, which is based on difference between polarisation and depolarisation currents in the first 20 and 60 s, and on a degree of nonlinearity factor which is the ratio of apparent conductivity at different voltages. Procedures needed to obtain consistent field test results are recommended as are diagnostic criteria to provide an indication of cable insulation condition. It is concluded that while the technique can provide evidence of poor insulation quality, it is also possible to distinguish between water trees in insulation and poor joint insulation.

  • Laser Inspection and Quality Control of Power Cable Insulation

    None

  • Control of the Electric Strength of Long Air Gaps

    None

  • Technical report: extrusion-molded joints for world's first long-distance XLPE cable line

    The features of a long-distance underground line, using 275-kV cross-linked polyethylene (XLPE) cable with extrusion-type molded joints (EMJs) are described. The line has a transmission capacity of 440 MW/cct and a 9.5-km section length. The cable has a cross-sectional area of 1400 mm/sup 2/ and insulation thickness of 17 mm. The EMJ, which was developed to withstand the higher stresses of the 275-kV cable, has the following features: (1) the conductor is connected using a copper ferrule, (2) semiconducting heat- shrinkable tubes are used for both inner and outer semiconducting layers, and (3) the insulation unit, applied on top of the stress-relieving cone, is made of insulating and semiconducting XLPE parts cured together in the factory. The fabrication, of the joint is described.<<ETX>>



Standards related to Cable insulation

Back to Top

Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment

This guide covers the technical requirements for the design, fabrication, testing, installation, and in-service performance of gas-insulated substations(GIS). In line with the user functional one-line diagram, the supplier should furnish all components of the GIS such as circuit breakers(CB), disconnect switches(DS), maintenance ground switches (MGS), fast-acting ground switches(FGS), voltage transformers(VT), current transformers(CT), SF6-to-air bushings, SF6-to-cable terminations, surge arresters, all the ...


IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants

The scope of this project has been expanded to no only cover power and control cables (per original PAR) but many types of special purpose cables used in the petroleum and chemical industry. This Guide provides the user information on cable standards, specifications, applications, installations, testing and areas of interest on cable pertaining to the petrochemical industry. Special purpose cables ...


IEEE Recommended Practice for Electric Power Systems in Commercial Buildings


IEEE Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation

This recommended practice establishes requirements for three-conductor round and flat type oil well cable used in supplying three-phase ac electric power to submersible pump motors. The major cable components are copper conductors, polypropylene insulation, polymeric jacket and galvanized armor.


IEEE Standard for Metal-Enclosed Bus

This standard covers assemblies of metal-enclosed conductors along with associated interconnections, enclosures, and supporting structures. When switches and disconnecting links are included, they shall conform to this standard. This standard is concerned with performance characteristics of enclosed, rather than open, indoor and outdoor conductor assemblies with rated maximum operating voltages through 38 kV. While this standard does cover 600 volt ...



Jobs related to Cable insulation

Back to Top