Conferences related to Solid Dielectrics

Back to Top

2021 IEEE Photovoltaic Specialists Conference (PVSC)

Photovoltaic materials, devices, systems and related science and technology


2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

The joint meeting is intended to provide an international forum for the exchange of information on state of the art research in the area of antennas and propagation, electromagnetic engineering and radio science


2020 IEEE 70th Electronic Components and Technology Conference (ECTC)

ECTC is the premier international conference sponsored by the IEEE Components, Packaging and Manufacturing Society. ECTC paper comprise a wide spectrum of topics, including 3D packaging, electronic components, materials, assembly, interconnections, device and system packaging, optoelectronics, reliability, and simulation.


2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 IEEE International Electron Devices Meeting (IEDM)

the IEEE/IEDM has been the world's main forum for reporting breakthroughs in technology, design, manufacturing, physics and the modeling of semiconductors and other electronic devices. Topics range from deep submicron CMOS transistors and memories to novel displays and imagers, from compound semiconductor materials to nanotechnology devices and architectures, from micromachined devices to smart -power technologies, etc.


More Conferences

Periodicals related to Solid Dielectrics

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Design & Test of Computers, IEEE

IEEE Design & Test of Computers offers original works describing the methods used to design and test electronic product hardware and supportive software. The magazine focuses on current and near-future practice, and includes tutorials, how-to articles, and real-world case studies. Topics include IC/module design, low-power design, electronic design automation, design/test verification, practical technology, and standards. IEEE Design & Test of ...


Device and Materials Reliability, IEEE Transactions on

Provides leading edge information that is critical to the creation of reliable electronic devices and materials, and a focus for interdisciplinary communication in the state of the art of reliability of electronic devices, and the materials used in their manufacture. It focuses on the reliability of electronic, optical, and magnetic devices, and microsystems; the materials and processes used in the ...


Dielectrics and Electrical Insulation, IEEE Transactions on

Electrical insulation common to the design and construction of components and equipment for use in electric and electronic circuits and distribution systems at all frequencies.


More Periodicals

Most published Xplore authors for Solid Dielectrics

Back to Top

Xplore Articles related to Solid Dielectrics

Back to Top

Analysis of internal partial discharges in solid dielectrics using an electro-optical measurement system

Proceedings of 1995 IEEE 5th International Conference on Conduction and Breakdown in Solid Dielectrics, 1995

The paper describes a non-destructive electro-optical diagnosis concept of partial discharges in solid dielectrics. The aim of the measurements is to localise the partial discharges, to gain information about the power density of the discharges and the correlation with the damage of the dielectric surface. This makes it possible to obtain a qualitative description of the complex deterioration process occurring ...


Acoustic emission from partial discharges in solid dielectrics

2014 IEEE Electrical Insulation Conference (EIC), 2014

Properties of acoustic signals emitted from PD sources in solid dielectrics are less well known in comparison with those in liquids. We have investigated three materials used typically as insulation in high voltage cables and their accessories, namely, polyethylene (PE), silicon rubber (SiR) and ethylene- propylene-diene monomer (EPDM). Several simple geometries of defects were considered, such as spherical voids, cylindrical ...


Space charge measurement in solid dielectrics by the pulsed electro-acoustic technique

Proceedings of the 2004 IEEE International Conference on Solid Dielectrics, 2004. ICSD 2004., 2004

Born in 1985, the PEA technique consists in detecting acoustic waves generated by space charges when they are subjected to an impulse of electric field. Its principle is relatively simple to understand and its use is very flexible. Compared to other techniques as LIPP (Laser Induced Pressure Pulse) method and TSM (Thermal Step Method), the PEA technique is the only ...


On the electrodynamics of partial discharges in voids in solid dielectrics

Proceedings of the 3rd International Conference on Conduction and Breakdown in Solid Dielectrics, 1989

It is suggested that a correct interpretation of partial-discharge transients can be obtained only through the concept of induced charge. The application of this concept enables a partial-discharge theory to be developed by means of which the influence of relevant void parameters can be assessed in a correct way. It is argued that the widely adopted abc-capacitance model does not ...


The breakdown study of three-layer solid dielectrics

ICSD'01. Proceedings of the 20001 IEEE 7th International Conference on Solid Dielectrics (Cat. No.01CH37117), 2001

The objective of this paper is to study the influence of the lengthening the path of the breakdown channel due to increasing the tangential component of the electric field vector at the interfaces on the breakdown voltage of the laminated dielectrics.


More Xplore Articles

Educational Resources on Solid Dielectrics

Back to Top

IEEE-USA E-Books

  • Analysis of internal partial discharges in solid dielectrics using an electro-optical measurement system

    The paper describes a non-destructive electro-optical diagnosis concept of partial discharges in solid dielectrics. The aim of the measurements is to localise the partial discharges, to gain information about the power density of the discharges and the correlation with the damage of the dielectric surface. This makes it possible to obtain a qualitative description of the complex deterioration process occurring during partial discharge stress in order to "calibrate" the electrical information during ageing of solid insulations.

  • Acoustic emission from partial discharges in solid dielectrics

    Properties of acoustic signals emitted from PD sources in solid dielectrics are less well known in comparison with those in liquids. We have investigated three materials used typically as insulation in high voltage cables and their accessories, namely, polyethylene (PE), silicon rubber (SiR) and ethylene- propylene-diene monomer (EPDM). Several simple geometries of defects were considered, such as spherical voids, cylindrical cavities and fissures. COMSOL Multiphysics software was used to conduct computer modelling of acoustic emission caused by PDs in such defects. A relationship between defect dimensions and frequency of the acoustic signal emitted was established. In spherical voids and cylindrical cavities f ~ 1/d, where d is the void size. In fissures, f ~ 1/(t0.37w0.5), where t is the fissure thickness and w is the fissure width.

  • Space charge measurement in solid dielectrics by the pulsed electro-acoustic technique

    Born in 1985, the PEA technique consists in detecting acoustic waves generated by space charges when they are subjected to an impulse of electric field. Its principle is relatively simple to understand and its use is very flexible. Compared to other techniques as LIPP (Laser Induced Pressure Pulse) method and TSM (Thermal Step Method), the PEA technique is the only one being not based on the relative displacement of the space charge in respect to the electrodes. We show here how consistent information on space charge can be extracted from a simple physical equation and we discuss with the help of a simple modeling the effect of numerical processes such as Gaussian filter.

  • On the electrodynamics of partial discharges in voids in solid dielectrics

    It is suggested that a correct interpretation of partial-discharge transients can be obtained only through the concept of induced charge. The application of this concept enables a partial-discharge theory to be developed by means of which the influence of relevant void parameters can be assessed in a correct way. It is argued that the widely adopted abc-capacitance model does not allow this insight to be achieved. In addition, it is claimed that the abc-model is based on an erroneous application of the concept of capacitance, and, although this simple approach can be a useful tool when discussing measuring techniques, it may lead to quite incorrect conclusions. The relationship between the transients in the applied voltage and current pulses leading to partial breakdown and the induced charge is found.<<ETX>>

  • The breakdown study of three-layer solid dielectrics

    The objective of this paper is to study the influence of the lengthening the path of the breakdown channel due to increasing the tangential component of the electric field vector at the interfaces on the breakdown voltage of the laminated dielectrics.

  • A study on the influence of partial discharges on the performance of solid dielectrics

    The authors show that the Inverse Power Law model seems to fit the physical process of degradation of solid insulation under the influence of partial discharge activity. The present study also indicates that the presence of electrical trees in XLPE leads to partial discharges, the magnitude of which appears to depend on the tree length. Electrical treeing does not appear to contribute to tan /spl delta/ and insulation resistance. The influence of PD activity on the life depends on the type of insulation in which partial discharges are taking place. For example, partial discharge magnitude of 200 pC results in a characteristic life of 2500 hours for MPPF capacitors, whereas a PD magnitude as high as 9000 pC results in a life of more than 5000 hours for machine insulation.

  • Partial discharge modelling based on a cylindrical model in solid dielectrics

    Partial discharges (PDs) are harmful to electrical insulation as they may degrade the material. Consequently, a lot of efforts have been made to develop suitable systems for PD measurements and monitoring. Due to the complexity of PDs and many factors that can influence PD characteristics, the research on PDs is still very active and several models have been proposed over the years to understand the behaviours of PDs. In the present paper, we have investigated the frequency characteristics of a cylindrical void in solid dielectric based on the model proposed by Forssen. Using similar program environments of MATLAB and COMSOL, our algorithm performs better in computation time and gives the similar results compared with the experiments. More importantly, a new interface has been developed so users are able to change parameters. This new feature allows the user to examine effects of various factors such as conductivity of the cavity surface, the applied voltage and statistical time lag on PD characteristics.

  • Effects of ionic impurity on space charge distribution in solid dielectrics

    We are interested in the interfacial phenomena concerning breakdown mechanism in solid dielectrics. We have been researching the effect of ionic impurity on space charge distribution and electric properties in filled epoxy resin and polyimide resin containing carbon. We have studied on the factors for hetero space charge accumulated near the electrodes by means of comparing the result of ionic analysis with the result of space charge behavior in high polymer this time. And we have guessed that hetero charge (positive charge) accumulated near the cathode are proton (H/sup +/) separated from organic acid, and negative charge accumulated near the anode are various -COO/sup -/ ions separated from organic acid.

  • Energy dielectronics - physical principles and methods for calculation of electric strength of solid dielectrics

    The application of energy dielectronics methods: for calculation of breakdown voltages for different types of applied voltages- and breakdown conditions has to be based on the choice of such phase transitions of solid dielectrics and! its thermodynamic description which: reflect in each specific case the real processes observed, in the discharge gap under breakdown. The search of universal energy characteristic suitable for all cases of breakdown does not appear to be promising.

  • The effects of dc prestress on switching surge breakdown phenomena in solid dielectrics

    The anomalous breakdown voltage of solid dielectrics increases with the dc voltage prestress when the polarity of the superimposed switching surge voltage and dc voltage are the same.



Standards related to Solid Dielectrics

Back to Top

No standards are currently tagged "Solid Dielectrics"


Jobs related to Solid Dielectrics

Back to Top