Conferences related to Digital-analog Conversion

Back to Top

ICC 2021 - IEEE International Conference on Communications

IEEE ICC is one of the two flagship IEEE conferences in the field of communications; Montreal is to host this conference in 2021. Each annual IEEE ICC conference typically attracts approximately 1,500-2,000 attendees, and will present over 1,000 research works over its duration. As well as being an opportunity to share pioneering research ideas and developments, the conference is also an excellent networking and publicity event, giving the opportunity for businesses and clients to link together, and presenting the scope for companies to publicize themselves and their products among the leaders of communications industries from all over the world.


2020 IEEE 16th International Workshop on Advanced Motion Control (AMC)

AMC2020 is the 16th in a series of biennial international workshops on Advanced Motion Control which aims to bring together researchers from both academia and industry and to promote omnipresent motion control technologies and applications.


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC)

The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.


2020 IEEE International Solid- State Circuits Conference - (ISSCC)

ISSCC is the foremost global forum for solid-state circuits and systems-on-a-chip. The Conference offers 5 days of technical papers and educational events related to integrated circuits, including analog, digital, data converters, memory, RF, communications, imagers, medical and MEMS ICs.


More Conferences

Periodicals related to Digital-analog Conversion

Back to Top

Applied Superconductivity, IEEE Transactions on

Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Circuits and Systems I: Regular Papers, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


Circuits and Systems II: Express Briefs, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


More Periodicals

Most published Xplore authors for Digital-analog Conversion

Back to Top

No authors for "Digital-analog Conversion"


Xplore Articles related to Digital-analog Conversion

Back to Top

Acoustooptic Binary Coding Based on Space-Time Integration and Its Application to Ultrafast High-Resolution Digital-Analog Conversion

IEEE Photonics Technology Letters, 2008

The theoretical and experimental background of the novel acoustooptic binary coding realization based on the space-time integration principle is proposed. The possible applications of acoustooptic space-time integration such as ultrafast high-resolution digital-analog conversion is shown. Further advantages of acoustooptic binary coding in the sense of integrated computational media creation are highlighted.


DAC design method based on microwave circuit principles

2006 IEEE MTT-S International Microwave Symposium Digest, 2006

We demonstrate a 2-bit DAC (digital to analog converter) employing microwave circuits for very high speed operation. Data switching and summation are performed using a diode sampler and broadband Wilkinson power combiner, respectively. The DAC was fabricated as a hybrid circuit, and it achieved 1 Gs/s. Due to the microwave circuit components it uses, our design is scalable for much ...


Digital Analog Conversion with SPI Protocol for Gas Sensors

2018 7th International Conference On Software Process Improvement (CIMPS), 2018

This work allows to know the necessary processes for reading and recovery of signals using an analog-digital converter and an electronic card Raspberry Pi 3. The SPI protocol is used for communication between the converter and the electronic card (Raspberry) in order to read, save and display the data obtained from gas sensors that allow knowing the parts per million ...


Computationally efficient multirate passband equalization for bandpass digital/analog conversion

42nd Midwest Symposium on Circuits and Systems (Cat. No.99CH36356), 1999

Many systems require a digital filter for decimation/interpolation and equalization of analog filtering. Under suitable conditions, iterative design of a low-rate, nonlinear-phase FIR filter and a cascaded high-rate, linear- phase FIR filter results in a computationally efficient filter structure.


Book review: Analog-Digital and Digital-Analog Conversion

IEE Proceedings G - Electronic Circuits and Systems, 1983

None


More Xplore Articles

Educational Resources on Digital-analog Conversion

Back to Top

IEEE.tv Videos

Analog to Digital Types
Analog to Digital Traits
A Direct-Conversion Transmitter for Small-Cell Cellular Base Stations with Integrated Digital Predistortion in 65nm CMOS: RFIC Industry Showcase
Noise-Shaped Active SAR Analog-to-Digital Converter - IEEE Circuits and Systems Society (CAS) Distinguished Lecture
ASC-2014 SQUIDs 50th Anniversary: 1 of 6 Arnold Silver
A 4mW-RX 7mW-TX IEEE 802.11ah Fully-Integrated RF Transceiver: RFIC Industry Showcase 2017
Richard Schreier Ph.D: Understanding Delta Sigma Data Converters
A Direct-Conversion Receiver for Multi-Carrier 3G/4G Small-Cell Base Stations in 65nm CMOS: RFIC Industry Showcase
Analog Devices, Inc. accepts the IEEE Corporate Innovation Award - Honors Ceremony 2017
Opportunities in Physical Computing driven by Analog Realization - Jennifer Hasler: 2016 International Conference on Rebooting Computing
Technology considerations for neuromorphic computing - David Mountain: 2016 International Conference on Rebooting Computing
Hardware-Software Co-Design for an Analog-Digital Accelerator for Machine Learning - Dejan Milojicic - ICRC 2018
Neuromorphic Chips - Kwabena Boahen: 2016 International Conference on Rebooting Computing
Optical Stealth Communication based on Amplified Spontaneous Emission Noise - Ben Wu - IEEE Sarnoff Symposium, 2019
Joint TX and Feedback RX IQ Mismatch Compensation for Integrated Direct Conversion Transmitters: RFIC Interactive Forum 2017
"Approximation- Beyond the Tyranny of Digital Computing," (Rebooting Computing)
APEC 2011-Intersil Promo Apec 2011
A 6GS/s 9.5 Bit Pipelined Folding-Interpolating ADC with 7.3 ENOB and 52.7dBc SFDR in the 2nd Nyquist Band in 0.25μm SiGe-BiCMOS: RFIC Interactive Forum
2011 IEEE/RSE Wolfson James Clerk Maxwell Award - Marcian E. Hoff
A 12-b, 1-GS/s 6.1mW Current-Steering DAC in 14nm FinFET with 80dB SFDR for 2G/3G/4G Cellular Application: RFIC Industry Showcase 2017

IEEE-USA E-Books

  • Acoustooptic Binary Coding Based on Space-Time Integration and Its Application to Ultrafast High-Resolution Digital-Analog Conversion

    The theoretical and experimental background of the novel acoustooptic binary coding realization based on the space-time integration principle is proposed. The possible applications of acoustooptic space-time integration such as ultrafast high-resolution digital-analog conversion is shown. Further advantages of acoustooptic binary coding in the sense of integrated computational media creation are highlighted.

  • DAC design method based on microwave circuit principles

    We demonstrate a 2-bit DAC (digital to analog converter) employing microwave circuits for very high speed operation. Data switching and summation are performed using a diode sampler and broadband Wilkinson power combiner, respectively. The DAC was fabricated as a hybrid circuit, and it achieved 1 Gs/s. Due to the microwave circuit components it uses, our design is scalable for much higher frequency operation, as well as higher resolution

  • Digital Analog Conversion with SPI Protocol for Gas Sensors

    This work allows to know the necessary processes for reading and recovery of signals using an analog-digital converter and an electronic card Raspberry Pi 3. The SPI protocol is used for communication between the converter and the electronic card (Raspberry) in order to read, save and display the data obtained from gas sensors that allow knowing the parts per million (ppm) of each gas present in a sample.

  • Computationally efficient multirate passband equalization for bandpass digital/analog conversion

    Many systems require a digital filter for decimation/interpolation and equalization of analog filtering. Under suitable conditions, iterative design of a low-rate, nonlinear-phase FIR filter and a cascaded high-rate, linear- phase FIR filter results in a computationally efficient filter structure.

  • Book review: Analog-Digital and Digital-Analog Conversion

    None

  • A low-power MPEG audio layer III decoder IC with an integrated digital-to-analog converter

    An MP3 decoder IC including a stereo DAC suitable for portable players is presented. The DAC uses digital interpolation to operate on a fixed output sample rate. The 28.5 mm/sup 2/ IC consumes 40-50 mW.

  • A multipath polyphase digital-to-analog converter for software radio transmission systems

    A digital-to-analog converter system compliant with the requirements of software radio transmission interfaces is presented. The system, through a proper combination of interpolation, digital filtering and data conversion allows us to relax the speed requirements of the analog and the digital section while fully satisfying the specifications. A design example and high level simulation results are presented.

  • Real-time digital simulator with digital/analog conversion interface for testing power instruments

    The need for real-time simulation stems from the fact that in many practical situations it is desirable to analyze the dynamic behavior of a large power system with advanced equipment that has complex and high-speed performance. Analog simulators are effective, however they impose serious limitations on the size of the system that is being modeled. The authors have studied and developed a real-time digital simulator using a hypercube computer, and realized real-time performance available for the analysis of large power systems. As the second step of the study, they developed a digital/analog conversion interface for testing actual power instruments. The interface exchanges the variables of fundamental frequency domain in the real-time digital simulator, and the variables of exact time domain in the analog equipment connected to the simulator. In this paper, the authors describe the detail of the digital/analog conversion interface of the real-time digital simulator for testing advanced power instruments. Its conversion algorithm, system configuration of the simulator with the interface, and experimental results are also presented.<<ETX>>

  • Real-time digital simulator with digital/analog conversion interface for testing power instruments

    The need for real-time simulation stems from the fact that in many practical situations it is desirable to analyze the dynamic behavior of a large power system with advanced equipment that has complex and high-speed performance. Analog simulators are effective, however they impose serious limitations on the size of the system that is being modeled. The authors have studied and developed a real-time digital simulator using a hypercube computer, and realized a real-time performance available for the analysis of large power systems. Now as the second step of their study, they developed a digital/analog conversion interface for testing actual power instruments. The interface exchanges the variables of fundamental frequency domain in the real- time digital simulator, and the variables of exact time domain in the analog equipment connected to the simulator. In this paper, the authors describe the detail of their developed digital/analog conversion interface of the real-time digital simulator for testing advanced power instruments. Its conversion algorithm, the system configuration of the simulator with the interface, and experimental results are also presented.<<ETX>>

  • A novel noise-shaping DAC for multi-bit sigma-delta modulator

    This paper describes a new noise-shaping technique for reducing the noise of the internal digital-analog conversion (DAC) in multi-bit low-pass sigma-delta modulators. The proposed technique works with most existing dynamic element matching (DEM) algorithms to provide noise shaping to the DAC noise. The simulation shows that a 10-dB improvement in the signal-to-noise conversion ratio can be obtained with the proposed noise-shaping with DEM (NSDEM) technique. A dithered DAC employing NSDEM is realized in a 0.35-/spl mu/m CMOS process and the test result shows the first-order high-pass noise shaping to the DAC noise, and validates the proposed concept.



Standards related to Digital-analog Conversion

Back to Top

No standards are currently tagged "Digital-analog Conversion"


Jobs related to Digital-analog Conversion

Back to Top