Conferences related to Output feedback

Back to Top

2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe)

Energy conversion and conditioning technologies, power electronics, adjustable speed drives and their applications, power electronics for smarter grid, energy efficiency,technologies for sustainable energy systems, converters and power supplies


2020 59th IEEE Conference on Decision and Control (CDC)

The CDC is the premier conference dedicated to the advancement of the theory and practice of systems and control. The CDC annually brings together an international community of researchers and practitioners in the field of automatic control to discuss new research results, perspectives on future developments, and innovative applications relevant to decision making, automatic control, and related areas.


2020 IEEE Applied Power Electronics Conference and Exposition (APEC)

APEC focuses on the practical and applied aspects of the power electronics business. Not just a power designer’s conference, APEC has something of interest for anyone involved in power electronics including:- Equipment OEMs that use power supplies and converters in their equipment- Designers of power supplies, dc-dc converters, motor drives, uninterruptable power supplies, inverters and any other power electronic circuits, equipments and systems- Manufacturers and suppliers of components and assemblies used in power electronics- Manufacturing, quality and test engineers involved with power electronics equipment- Marketing, sales and anyone involved in the business of power electronic- Compliance engineers testing and qualifying power electronics equipment or equipment that uses power electronics


2020 IEEE International Conference on Industrial Technology (ICIT)

ICIT focuses on industrial and manufacturing applications of electronics, controls, communications, instrumentation, and computational intelligence.


2020 IEEE International Conference on Robotics and Automation (ICRA)

The International Conference on Robotics and Automation (ICRA) is the IEEE Robotics and Automation Society’s biggest conference and one of the leading international forums for robotics researchers to present their work.


More Conferences

Periodicals related to Output feedback

Back to Top

Audio, Speech, and Language Processing, IEEE Transactions on

Speech analysis, synthesis, coding speech recognition, speaker recognition, language modeling, speech production and perception, speech enhancement. In audio, transducers, room acoustics, active sound control, human audition, analysis/synthesis/coding of music, and consumer audio. (8) (IEEE Guide for Authors) The scope for the proposed transactions includes SPEECH PROCESSING - Transmission and storage of Speech signals; speech coding; speech enhancement and noise reduction; ...


Automatic Control, IEEE Transactions on

The theory, design and application of Control Systems. It shall encompass components, and the integration of these components, as are necessary for the construction of such systems. The word `systems' as used herein shall be interpreted to include physical, biological, organizational and other entities and combinations thereof, which can be represented through a mathematical symbolism. The Field of Interest: shall ...


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Circuits and Systems II: Express Briefs, IEEE Transactions on

Part I will now contain regular papers focusing on all matters related to fundamental theory, applications, analog and digital signal processing. Part II will report on the latest significant results across all of these topic areas.


Communications, IEEE Transactions on

Telephone, telegraphy, facsimile, and point-to-point television, by electromagnetic propagation, including radio; wire; aerial, underground, coaxial, and submarine cables; waveguides, communication satellites, and lasers; in marine, aeronautical, space and fixed station services; repeaters, radio relaying, signal storage, and regeneration; telecommunication error detection and correction; multiplexing and carrier techniques; communication switching systems; data communications; and communication theory. In addition to the above, ...


More Periodicals

Most published Xplore authors for Output feedback

Back to Top

Xplore Articles related to Output feedback

Back to Top

A 4K static 5-V RAM

1976 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1976

This paper will cover a 4K bit, static, TTL compatible, 5-V only, MOS RAM with typical dissipation and access of 350 mW and 150 ns, respectively.


Stable monolithic inverting OP Amp with 130 V/ µ s slew rate

1972 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1972

A monolithic IC operational amplifier that provides high speed in inverting applications has been developed. Full-power bandwidth of 2 MHz, open-loop gain of 300 at 1 MHz and stable response with capacitive load have been achieved.


Sessions: coding for memory applications

1988 IEEE International Symposium on Information Theory., 1988

The following topics are dealt with: write-unidirectional memory capacity and generalised codes; anticipatory coding strategies; on-chip and board-level error control; discrete noiseless channels with input constraints; sliding block decoder mappings; error-correcting line code design and spectral characterisation.<<ETX>>


10 bit, 5 megasample/second monolithic A/D converter

1976 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1976

A bipolar LSI A/D converter which quantizes an analog signal into 10 bits± 1/4LSB at a 5-megasample rate, will be discussed. Fabrication technology includes 1-GHz bipolar transistors, cermet thin-film resistors and a two-level metal interconnect system.


A wideband high-voltage monolithic amplifier

1973 IEEE International Solid-State Circuits Conference. Digest of Technical Papers, 1973

A report on new circuit techniques developed for a low-distortion, large-swing monolithic amplifier, suitable for oscilloscope deflection, will be presented. Features include 90-V swing and 1-V per ns slew rate.


More Xplore Articles

Educational Resources on Output feedback

Back to Top

IEEE-USA E-Books

  • A 4K static 5-V RAM

    This paper will cover a 4K bit, static, TTL compatible, 5-V only, MOS RAM with typical dissipation and access of 350 mW and 150 ns, respectively.

  • Stable monolithic inverting OP Amp with 130 V/ µ s slew rate

    A monolithic IC operational amplifier that provides high speed in inverting applications has been developed. Full-power bandwidth of 2 MHz, open-loop gain of 300 at 1 MHz and stable response with capacitive load have been achieved.

  • Sessions: coding for memory applications

    The following topics are dealt with: write-unidirectional memory capacity and generalised codes; anticipatory coding strategies; on-chip and board-level error control; discrete noiseless channels with input constraints; sliding block decoder mappings; error-correcting line code design and spectral characterisation.<<ETX>>

  • 10 bit, 5 megasample/second monolithic A/D converter

    A bipolar LSI A/D converter which quantizes an analog signal into 10 bits± 1/4LSB at a 5-megasample rate, will be discussed. Fabrication technology includes 1-GHz bipolar transistors, cermet thin-film resistors and a two-level metal interconnect system.

  • A wideband high-voltage monolithic amplifier

    A report on new circuit techniques developed for a low-distortion, large-swing monolithic amplifier, suitable for oscilloscope deflection, will be presented. Features include 90-V swing and 1-V per ns slew rate.

  • Monolithic sub-nanosecond switch

    None

  • A SCR regulated power supply with high-speed transient response

    None

  • Correction to "Simultaneous stabilization via static output feedback and state feedback"

    In the above-mentioned paper (ibiid., vol. 44, pp. 1277-1282, June 1999), the address for the first author was listed incorrectly. The appropriate contact information appears herein.

  • Output regulation for parabolic distributed parameter systems: set point control

    In this paper we state our recent solvability result for the state feedback regulator problem for distributed parameter systems and present two examples in set point control using this methodology for a one dimensional heat equation. In addition, we discuss some computational issues associated with the explicit implementation of the feedback design strategies.

  • Two-level optimal output feedback stabilizer design

    Design of two-level system stabilizers is considered using an optimal reduced- order model whose state variables are torque angles and speeds. The reduced- order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of the electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interaction. The effectiveness of this controller is evaluated, and an example, the multimachine system, is given to illustrate the advantages of the proposed method. The responses of the system with the two- level scheme and optimal reduced order scheme are included for comparative analyses.<<ETX>>



Standards related to Output feedback

Back to Top

No standards are currently tagged "Output feedback"


Jobs related to Output feedback

Back to Top