240 resources related to Industrial waste
- Topics related to Industrial waste
- IEEE Organizations related to Industrial waste
- Conferences related to Industrial waste
- Periodicals related to Industrial waste
- Most published Xplore authors for Industrial waste
The Pulsed Power Conference is held on a biannual basis and serves as the principal forum forthe exchange of information on pulsed power technology and engineering.
All topics related to engineering and technology management, including applicable analytical methods and economical/social/human issues to be considered in making engineering decisions.
IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.
The 2020 IEEE International Conference on Systems, Man, and Cybernetics (SMC 2020) will be held in Metro Toronto Convention Centre (MTCC), Toronto, Ontario, Canada. SMC 2020 is the flagship conference of the IEEE Systems, Man, and Cybernetics Society. It provides an international forum for researchers and practitioners to report most recent innovations and developments, summarize state-of-the-art, and exchange ideas and advances in all aspects of systems science and engineering, human machine systems, and cybernetics. Advances in these fields have increasing importance in the creation of intelligent environments involving technologies interacting with humans to provide an enriching experience and thereby improve quality of life. Papers related to the conference theme are solicited, including theories, methodologies, and emerging applications. Contributions to theory and practice, including but not limited to the following technical areas, are invited.
This conference provides an exchange of technical topics in the fields of Solid State Modulators and Switches, Breakdown and Insulation, Compact Pulsed Power Systems, High Voltage Design, High Power Microwaves, Biological Applications, Analytical Methods and Modeling, and Accelerators.
Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission
Specific topics of interest include, but are not limited to, sequence analysis, comparison and alignment methods; motif, gene and signal recognition; molecular evolution; phylogenetics and phylogenomics; determination or prediction of the structure of RNA and Protein in two and three dimensions; DNA twisting and folding; gene expression and gene regulatory networks; deduction of metabolic pathways; micro-array design and analysis; proteomics; ...
Methods, algorithms, and human-machine interfaces for physical and logical design, including: planning, synthesis, partitioning, modeling, simulation, layout, verification, testing, and documentation of integrated-circuit and systems designs of all complexities. Practical applications of aids resulting in producible analog, digital, optical, or microwave integrated circuits are emphasized.
Design for manufacturability, cost and process modeling, process control and automation, factory analysis and improvement, information systems, statistical methods, environmentally-friendly processing, and computer-integrated manufacturing for the production of electronic assemblies, products, and systems.
Research, development, design, application, construction, installation, and operation of electric power generating facilities (along with their conventional, nuclear, or renewable sources) for the safe, reliable, and economic generation of electrical energy for general industrial, commercial, public, and domestic consumption, and electromechanical energy conversion for the use of electrical energy
IEEE 1997 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 1997
Experimental results concerning removal of nitrobenzene and volatile organic compounds (VOCs), such as toluene, trichloroethylene and benzene with the use of low energy electron beam are presented. Lab scale apparatus for electron beam irradiation of water is briefly described. Total dose of /spl beta/ radiation was controlled by the time of water circulation (1-50 min.), accelerating voltage (V/sub a/=100-125 kV) ...
2009 3rd International Conference on Bioinformatics and Biomedical Engineering, 2009
Sulfobutyl-beta-cyclodextrin could remarkably decrease the fluorescence intensity of Neutral Red. In contrast, fluorescence intensity of Neutral Red enhanced efficiently when benzidine was present. Consequently, based on the competitive interaction between benzidine and Neutral Red, a new fluorescence spectrographic method of the determination of benzidine was established using sulfobutyl-beta-cyclodextrin and Neutral Red as a supermolecule probe in B-R buffer solution (pH ...
IEEE Cement Industry Technical Conference, 2006. Conference Record., 2006
The paper is a comprehensive description of the modernization project and how the equipment and process had been tailored to maximize the use of waste derived fuel. Giant Cement is a company who has made the use of waste derived fuel a major part of the overall business strategy. The use of energy from waste derived fuel makes a lot ...
2007 International Conference on Control, Automation and Systems, 2007
The air pollution is the serious situation in East Asia. It is detected remarkably by the observations of suspended particulate matters. Yellow sand was observed conventionally in the district. On recent years, the yellow sand interacts with industrial waste gas and becomes polluted dust and goes over the border. We observed the yellow sand by using digital dust meters, and ...
IEEE International Symposium on Electronics and the Environment, 2003., 2003
Disposing of waste into landfills is detrimental to the natural environment; waterbodies, land and the air. Conservation of natural resources is important for all future generations. It is estimated that over 390 million tons of waste was disposed into United States landfills in 1999. Today in year 2001, the situation is likely to be much worse. In light of our ...
Industrial Standards and IoT Use Cases - Talk Four-B: IECON 2018
A Nuclear Waste Repository Grows In Finland
Care Innovations: WEEE and RoHs(e-waste) (com legendas em portugues)
IEEE Future Directions: Green Information and Communications Technology: An Overview
Care Innovations: WEEE and RoHs(e-waste recycling and disposal)
Robotics History: Narratives and Networks Oral Histories: Vic Scheinman
Industrial Standards and IoT Use Cases - Talk Three: IECON 2018
Industrial Standards and IoT Use Cases - Talk Two: IECON 2018
Recycling: Computers & Electronics (com legendas em portugues)
Bob Martin on Industrial Internet Reference Architecture: 2016 End to End Trust and Security Workshop for the Internet of Things
Robotics History: Narratives and Networks Oral Histories: Brian Carlisle
Fog Computing Design Principles for Industrial IoT Applications - Sudhanshu Gaur, Fog World Congress 2017
Industry Forum: 5G Technologies and Applications, Joseph Salvo - IECON 2018
Care Innovations: Toxics In Electronics
IROS TV 2019- Khalifa University Robotics Institute- Khalifa University of Science & Technology
Stan Schneider: Complexity Management in the Industrial IoT - IoT Challenges Industry Forum Panel: WF IoT 2016
5G Future X Network & the Next Industrial Revolution - Peter Vetter - 5G World Forum Santa Clara 2018
Industry Forum: 5G Technologies and Applications, Kim Fung Tsang - IECON 2018
IEEE Standard 1680: An Incentive to Design Greener Computers
Experimental results concerning removal of nitrobenzene and volatile organic compounds (VOCs), such as toluene, trichloroethylene and benzene with the use of low energy electron beam are presented. Lab scale apparatus for electron beam irradiation of water is briefly described. Total dose of /spl beta/ radiation was controlled by the time of water circulation (1-50 min.), accelerating voltage (V/sub a/=100-125 kV) and electron beam current (0.1-1 mA) for flow rate of 1 kg/min. The electron beam was generated in vacuum (p<10/sup -7/ Torr) produced by a system of diffusion-sorption-rotary pumps. Electrons were injected into the treated water through an electron beam permeable membrane made of boron nitride poly-crystalline ceramics with a thickness of 10 /spl mu/m. A low mass density (/spl sim/2 g/cm/sup 3/) of the ceramic material enables to obtain a high transmission of the electron beam even for a low accelerating voltage. Dependencies of the removed content of contaminants on the total dose of /spl beta/ radiation are presented. Despite using low energy electron beam, the results have indicated a significant removal of nitrobenzene and VOCs treated.
Sulfobutyl-beta-cyclodextrin could remarkably decrease the fluorescence intensity of Neutral Red. In contrast, fluorescence intensity of Neutral Red enhanced efficiently when benzidine was present. Consequently, based on the competitive interaction between benzidine and Neutral Red, a new fluorescence spectrographic method of the determination of benzidine was established using sulfobutyl-beta-cyclodextrin and Neutral Red as a supermolecule probe in B-R buffer solution (pH 2.75). The linear range was from 2.00times10<sup>-8</sup> mol/L to 1.80times10<sup>-7</sup> mol/L, the limit of detection was 2.61times10<sup>-8</sup> mol/L. It is indicated that this method had high sensitivity, good selectivity and convenient application. This method had been applied to the determination of benzidine in industry waste water. A preliminary discussion was also given on the mechanism of the fluorescence reaction system.
The paper is a comprehensive description of the modernization project and how the equipment and process had been tailored to maximize the use of waste derived fuel. Giant Cement is a company who has made the use of waste derived fuel a major part of the overall business strategy. The use of energy from waste derived fuel makes a lot of sense in an energy intensive industry such as cement, knowing that the "by-product", being the ashes, can be fully integrated into the clinker minerals and thereby the final product. As realized by most cement producers who have or are using waste derived fuel, whether hazardous or non-hazardous, there is a price tag associated which need to be part of the business model. Also, it requires that all levels of the organization, within the company, buy into the concept.
The air pollution is the serious situation in East Asia. It is detected remarkably by the observations of suspended particulate matters. Yellow sand was observed conventionally in the district. On recent years, the yellow sand interacts with industrial waste gas and becomes polluted dust and goes over the border. We observed the yellow sand by using digital dust meters, and found that the yellow sand had local structures whose width was 6-75 km. This is narrower than that of a common sense. Passage times of the maximum parts of the peaks are less than 30 min. The maximum values are about 200 [mug/m3]. The yellow sand interacts with the vapor. The interactions are estimated by neural network analysis using optical SPM observations and meteorological measurements. We estimated some yellow sand peaks and showed different characters of each peaks.
Disposing of waste into landfills is detrimental to the natural environment; waterbodies, land and the air. Conservation of natural resources is important for all future generations. It is estimated that over 390 million tons of waste was disposed into United States landfills in 1999. Today in year 2001, the situation is likely to be much worse. In light of our Company's (Ricoh Company Ltd.) genuine concern to reduce this burden on the natural environment, we have embarked on the mission to discontinue disposing waste into landfills. Establishing such a system in the United States would be very difficult. The United States is a vast land with many landfills. Its culture is one of landfill disposal and not recycling. Despite this fact, Ricoh Electronics, Inc. accomplished a culture change among its employees to achieve zero waste to landfill. As of March 2001, all eleven of Ricoh's North American manufacturing factories successfully established zero waste to landfill systems.
There is waste (hazardous and toxic waste), which should not be mixed with industrial waste and garbage. It's formed in small proportion and should be processed or disposed according to special technologies. It includes radioactive waste, war waste (WTA, missile fuel, etc.) toxic and supertoxic industrial waste, hazardous and toxic medical waste. A number of experimental treatment technologies of some kinds of waste with application of low temperature air plasma generators on AC three-phase current of commercial frequency have been developed. They have some advantages. Ionized plasma particles are chemically active that makes the process more intensive. Use of air (heated in the plasma generator up to high temperature) as an oxidizing agent decreases flue gases quantity. High temperature provides high quenching rate, which allows creating methastable and non-equilibrium states Application of plasma generators of commercial frequency essentially decreases their cost due to a great number of standard equipment. Use of electric energy instead of fuel in a number of cases is more profitable on cost indexes. The process of temperature mode control in the furnace is more simple at the expense of possibility to change thermal capacity of the plasma jet.
This article is designed to carry out design of index system for evaluation of ecological city which is applicable to features of city of Ha'erbin on basis of actual conditions of Ha'erbin in principle of combination of qualitative analysis and quantitative analysis and to conduct evaluation on effect of restoration of ecological city of Ha'erbin with principal components analysis method. Results of evaluation show that some accomplishment has been made in terms of construction of ecological city of Ha'erbin and sub-system of environment, economy and society of Ha'erbin has been greatly improved since 2002.
Since World Commission on Environment and Development published the so-called Brundtland Report ldquoOur Common Futurerdquo in 1987, and the United Nations Environmental Planning Board presented ldquoAgenda 21rdquo in 1992, sustainable development has become an important philosophy to integrating economic, environmental, social and ethical considerations. In this study, we establish hierarchy system for evaluation of fishing industry, and then exploit multicriteria decision analysis to derive the synthetic values of the sustainable development strategies corresponding to considered criteria. In addition, we proposed a multiobjective compromise optimization called TOPSIS (technique for order preference by similarity to ideal solution) to solve the optimal strategy with Minkowskipsilas L<sub>p</sub>-metric concept. The optimal compromise solution should have the shortest distance from the positive ideal solution as well as the farthest distance from the negative ideal solution. Through this study, we successfully demonstrate that TOPSIS is a good assessment for evaluation of multiple criteria decision making problems.
Problems surrounding the processing of industrial waste in Japan are getting more and more serious, and manufacturers are being pressed with the need to quickly address the issue of reducing industrial waste. Through the research on recycling of PVC insulated wire used in large quantities in distribution lines, the authors have developed a practical, low-cost recycled PVC insulated wire, and have also obtained insights into the lifetime of such wire and the influence of inclusion of polyethylene. In addition, the quantitative effect of adopting recycled PVC insulated wire on alleviating the global environmental burden has been trial-calculated using the LCA procedure, and the large effect on reducing the environmental burden has been confirmed.
According to the current situation of lacking of resources and environmental degradation, it puts forward to making use of the interaction, recombination, revivification and energy transfer of the waste components of industrial products, which depends on analysis about the potential value of industrial waste products and relevant theory about management of product life cycle. That is all in order to deal with the potential value of industrial waste products optimally and use them “again” better.
No standards are currently tagged "Industrial waste"