3,614 resources related to Disposal
- Topics related to Disposal
- IEEE Organizations related to Disposal
- Conferences related to Disposal
- Periodicals related to Disposal
- Most published Xplore authors for Disposal
IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.
The Conference focuses on all aspects of instrumentation and measurement science andtechnology research development and applications. The list of program topics includes but isnot limited to: Measurement Science & Education, Measurement Systems, Measurement DataAcquisition, Measurements of Physical Quantities, and Measurement Applications.
To promote awareness, understanding, advancement and application of ocean engineering and marine technology. This includes all aspects of science, engineering, and technology that address research, development, and operations pertaining to all bodies of water. This includes the creation of new capabilities and technologies from concept design through prototypes, testing, and operational systems to sense, explore, understand, develop, use, and responsibly manage natural resources.
The world's premiere conference in MEMS sensors, actuators and integrated micro and nano systems welcomes you to attend this four-day event showcasing major technological, scientific and commercial breakthroughs in mechanical, optical, chemical and biological devices and systems using micro and nanotechnology.The major areas of activity in the development of Transducers solicited and expected at this conference include but are not limited to: Bio, Medical, Chemical, and Micro Total Analysis Systems Fabrication and Packaging Mechanical and Physical Sensors Materials and Characterization Design, Simulation and Theory Actuators Optical MEMS RF MEMS Nanotechnology Energy and Power
Industrial information technologies
The IEEE Aerospace and Electronic Systems Magazine publishes articles concerned with the various aspects of systems for space, air, ocean, or ground environments.
Contains articles on the applications and other relevant technology. Electronic applications include analog and digital circuits employing thin films and active devices such as Josephson junctions. Power applications include magnet design as well asmotors, generators, and power transmission
Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.
Video A/D and D/A, display technology, image analysis and processing, video signal characterization and representation, video compression techniques and signal processing, multidimensional filters and transforms, analog video signal processing, neural networks for video applications, nonlinear video signal processing, video storage and retrieval, computer vision, packet video, high-speed real-time circuits, VLSI architecture and implementation for video technology, multiprocessor systems--hardware and software-- ...
IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...
2010 International Conference of Information Science and Management Engineering, 2010
Under the pressure of environmental regulations and public opinion, manufacturers must take on its responsibility for waste disposal, which caused the increase of its operating cost. Therefore, it is important for studying in product pricing under the waste self-selection disposal mode of manufacturer to advancing the formation of competitive advantage of product price. Based on this, this paper establishes an ...
2007 International Conference on Control, Automation and Systems, 2007
With the advent of throw-away products, the final disposal of such products has become a problem to which considerable attention need be given. For example, the investigation in Japan in 2004 shows the fact that the quantity of production of the diaper increases from 3000 million in 2003 to 3,700 million in 2008. Therefore, in this paper, a new treatment ...
2007 International Conference on Control, Automation and Systems, 2007
Since the program for the development of a deep geological disposal system for the spent fuel from nuclear power plants was launched in 1997 as a national program in KOREA, a pre-conceptual design of a disposal system for spent fuel in a deep geological host rock formation was carried out and the Korean reference spent fuel vertical disposal system (KRS-VI) ...
15th IEEE/NPSS Symposium. Fusion Engineering, 1993
A detailed activation analysis has been performed for the tokamak fusion power reactor ARIES-II. The reactor uses vanadium alloy as a structural material and liquid lithium as a coolant and tritium breeder. The total activity produced in the reactor at shutdown is 3848 MCi and drops to only 59 MCi during the first year following shutdown. Calculations of the decay ...
2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control, 2006
As an aging society is a tendency in the future, the production of disposable diaper has been increased year by year. It is believed that the problem of the disposal of diapers is becoming a great problem in the future. For waste reduction, a new disposal technique for the used disposable diapers by the pair conditions of microorganisms, cryptomeria chips ...
Care Innovations: WEEE and RoHs(e-waste recycling and disposal)
Care Innovations: WEEE and RoHs(e-waste) (com legendas em portugues)
Care Innovations: Toxics In Electronics (com legendas em portugues)
A Nuclear Waste Repository Grows In Finland
Care Innovations: Responsibility For Being Green (com legendas em portugues)
Care Innovations: Toxics In Electronics
Care Innovations: Green Engineering
IEEE Standard 1680: An Incentive to Design Greener Computers
Recycling of Computers & Consumer Electronics
Energy Innovations: The Hydrogen House
Under the pressure of environmental regulations and public opinion, manufacturers must take on its responsibility for waste disposal, which caused the increase of its operating cost. Therefore, it is important for studying in product pricing under the waste self-selection disposal mode of manufacturer to advancing the formation of competitive advantage of product price. Based on this, this paper establishes an organic contact between three kind of waste and waste self-selection disposal mode, analyses the basic characteristics of different modes and constructs the pricing models by the method of econometrics. This paper confirms the optimal product pricing and profits of different waste and provides references for manufacturer to choose appropriate disposal modes.
With the advent of throw-away products, the final disposal of such products has become a problem to which considerable attention need be given. For example, the investigation in Japan in 2004 shows the fact that the quantity of production of the diaper increases from 3000 million in 2003 to 3,700 million in 2008. Therefore, in this paper, a new treatment technique for decomposing disposable diapers by microorganisms with cryptomeria chips is proposed. In addition, because a small size disposal system with a temperature controller is expected, the disposal processes of disposable diapers are modeled. The simulations with difference temperature conditions are performed using the models. And then, the relationship between temperature and decomposition rate become clear.
Since the program for the development of a deep geological disposal system for the spent fuel from nuclear power plants was launched in 1997 as a national program in KOREA, a pre-conceptual design of a disposal system for spent fuel in a deep geological host rock formation was carried out and the Korean reference spent fuel vertical disposal system (KRS-VI) is concurrently being developed. In this study, a virtual environment system for developing a spent fuel disposal system and reviewing and analyzing the process for an optimization was implemented. This system consisted of a 3-D graphic simulation module and an analysis module, and was developed in three stages. To develop this system, the design bases like the fuel canisters, the production rate and the functions of the facility, and the detailed processes were reviewed. With the graphic simulation module, the disposal processes were simulated in a virtual work cell according to a process scenario. Also, with the analyses module, the spent fuel disposal processes were preliminarily analyzed. It is necessary to verify this system more specifically and analyze the disposal process in detail. This virtual system can be effectively used for developing a process and the process equipment, as well as optimizing the process for a spent fuel disposal in a deep geological host rock.
A detailed activation analysis has been performed for the tokamak fusion power reactor ARIES-II. The reactor uses vanadium alloy as a structural material and liquid lithium as a coolant and tritium breeder. The total activity produced in the reactor at shutdown is 3848 MCi and drops to only 59 MCi during the first year following shutdown. Calculations of the decay heat showed that it is 53 MW at shutdown and it takes a relatively short time (<1 day) to decay by about a factor of 10. One week after shutdown, the values of the integrated decay heat generated in the structure are 548 and 1298 GJ for the reactor inboard and outboard regions, respectively. This heat represents less than 2% of the reactor thermal power and hence does not present a safety hazard. The biological hazard potential was calculated according to the NRC regulations specified in 10CFR20. The total BHP at shutdown is 388 x 10/sup 6/m/sup 3/ air. The radwaste classification of the ARIES-II structure has been evaluated according to both the NRC 10CFR61 and Fetter waste disposal concentration limits. Except for the reactor outboard blanket which would qualify as Class A low level waste, the rest of the reactor structure would only qualify for Class C rating. The outboard blanket has a Class A rating value of 0.95 which is based on allowing it to cool down for about 10 years following the end of the reactor lifetime.
As an aging society is a tendency in the future, the production of disposable diaper has been increased year by year. It is believed that the problem of the disposal of diapers is becoming a great problem in the future. For waste reduction, a new disposal technique for the used disposable diapers by the pair conditions of microorganisms, cryptomeria chips and ALGA is purposed. In this paper, we showed that microorganisms living with the cryptomeria chips have effect on the decomposition of the disposable diapers. A disposal process model of disposable diapers is built according to the results of experiments
Solid waste is the biggest and primary pollution source in many Chinese cities such as Jinan, the capital of Shandong Province. Before the municipal sanitary landfill plant became operational in 1998, large amount of solid waste generated in Jinan was trucked to garbage disposal sites scattered in a number of suburban villages including JiuQu, Dajian Ditch, Shiliuliher, South and North Zhaner, and Zhan Village. These old disposal sites not only affect air quality and cause environmental degradation, but also contaminate groundwater severely. More importantly, as the city of Jinan sprawls outwards in recent years those disposal sites have been enclosed by new developments. Therefore, finding an optimal way to clean these abandoned disposal sites becomes a pressing issue, which has been listed as an important initiative in the city's comprehensive plan. This article analyzes the geographical distribution, magnitude, and chemical components of one of those garbage disposal sites near the Jiuqu Village, by using multifaceted research methods including field investigation, geophysical prospecting, topographical mapping, and advanced remote sensing techniques. Results of the examination of soil quality and magnitude of heavy metal indicate that this garbage hill is largely made up of non-toxic waste (i.e., lower than the minimum standards set by the Chinese Environmental Protection Agency). Therefore, it is suggested that the garbage in Jiuqu can be reused as garden soil through physical filtration, an efficient way of cleaning the garbage waste at affordable cost.
Development of nuclear technologies is accompanied by the growth of radioactive waste including long-lived ones. The waste inside the Chernobyl 4-th unit is of particular importance because their amount is estimated as much as 20 MCi. Under the circumstances a problem of operative characterization of the waste and their long-term disposal is urgent. The report presents an overview of the waste characterization method elaborated in NSC KIPT based on /spl gamma/-activation analysis using bremsstrahlung of the high-current electron linac. On the other hand disposal of the radioactive waste faces a problem of confinement materials (including geological structures). Such materials have to keep their protection properties with respect to radionuclide transport under absorbed dose value up to /spl sim/10/sup 7/ Gy during thousand years or so. The elaborated methods for production of radionuclide-tracers and operative determination of their diffusion coefficients into barriers under different doses of the braking photons are described.
In this paper the results of theoretical and experimental studies of the operation modes for the plasma module on the basis of high-frequency torch plasmatron, intended for plasma disposal of combustible compositions on the basis of oil waste in the conditions of nonequilibrium air plasma of the high- frequency flare discharge are presented. The description of the industrial facility for plasma-catalytic disposal of oil sludge is provided.
A large quantity of waste drilling fluid and drainage are yielded during the exploration procedure of oil. These wastes may pollute soil, groundwater and surface water because of the surface leakage and overflow. The north of Shaanxi province, which is the oil production area of the Changqing Oilfield, was chosen as study area. Analysis of waste drilling fluid was carried out in five different wells sited in the study area. The results indicated that it was hard to achieve solid-liquid separation with physical method. The study put forward the solidification-after-gelout disposal technique for waste drilling fluid. In the technique, iron salts were chosen as gel breaker, fly ash and lime were chosen as curing agents and loess was chosen as supplementary material. The optimum conditions were investigated and the results of experiment showed that when the content of FeCl<sub>3</sub> was 0.6 percent of waste drilling fluid, the content of fly-ash was 25 percent, the content of lime was 6 percent and the content of loess was 40 percent. The results showed that it was effective to use the technique for treating the waste drilling fluid.
It's significant to find a wastewater disposal technology with low cost, good effect and easier operation in Chinese freeway subranges. Based on generalizing the technologies of wastewater disposal in freeway subranges, this paper discussed how to apply the subsurface infiltration system for wastewater disposal in a freeway subrange. Comparing with conventional wastewater disposal system, the subsurface infiltration system can save 40% cost in a lifecycle of a freeway subrange.
Motor Vehicle Event Data Recorders (MVEDRs) collect, record, store and export data related to motor vehicle pre-defined events. This standard defines a protocol for MVEDR output data compatibility and export protocols of MVEDR data elements. This standard does not prescribe which specific data elements shall be recorded, or how the data are to be collected, recorded and stored. It is ...
This standard defines the interdisciplinary tasks that are required throughout a systemﾒs life cycle to transform stakeholder needs, requirements, and constraints into a system solution. This standard is intended to guide the development of systems for commercial, government, military, and space applications. The information applies to a project within an enterprise that is responsible for developing a product design and ...
This International Standard establishes a common framework for software life cycle processes, with welldefined terminology, that can be referenced by the software industry. It contains processes, activities, and tasks that are to be applied during the acquisition of a software product or service and during the supply, development, operation, maintenance and disposal of software products. Software includes the software portion ...