Conferences related to Stem cells

Back to Top

2020 IEEE International Conference on Plasma Science (ICOPS)

IEEE International Conference on Plasma Science (ICOPS) is an annual conference coordinated by the Plasma Science and Application Committee (PSAC) of the IEEE Nuclear & Plasma Sciences Society.


2020 Joint Conference of the IEEE International Frequency Control Symposium and International Symposium on Applications of Ferroelectrics (IFCS-ISAF)

Ferroelectric materials and applications


2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII)

The world's premiere conference in MEMS sensors, actuators and integrated micro and nano systems welcomes you to attend this four-day event showcasing major technological, scientific and commercial breakthroughs in mechanical, optical, chemical and biological devices and systems using micro and nanotechnology.The major areas of activity in the development of Transducers solicited and expected at this conference include but are not limited to: Bio, Medical, Chemical, and Micro Total Analysis Systems Fabrication and Packaging Mechanical and Physical Sensors Materials and Characterization Design, Simulation and Theory Actuators Optical MEMS RF MEMS Nanotechnology Energy and Power


2019 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)

The conference program will consist of plenary lectures, symposia, workshops andinvitedsessions of the latest significant findings and developments in all the major fields ofbiomedical engineering.Submitted papers will be peer reviewed. Accepted high quality paperswill be presented in oral and postersessions, will appear in the Conference Proceedings and willbe indexed in PubMed/MEDLINE & IEEE Xplore


2019 56th ACM/ESDA/IEEE Design Automation Conference (DAC)

EDA (Electronics Design Automation) is becoming ever more important with the continuous scaling of semiconductor devices and the growing complexities of their use in circuits and systems. Demands for lower-power, higher-reliability and more agile electronic systems raise new challenges to both design and design automation of such systems. For the past five decades, the primary focus of research track at DAC has been to showcase leading-edge research and practice in tools and methodologies for the design of circuits and systems.

  • 2022 59th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2021 58th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2020 57th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2018 55th ACM/ESDA/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2017 54th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2016 53nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2015 52nd ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2014 51st ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC Description for TMRF The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 sessions on design methodologies and EDA tool developments, keynotes, panels, plus the NEW User Track presentations. A diverse worldwide community representing more than 1,000 organizations attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading

  • 2013 50th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The world's premier EDA and semiconductor design conference and exhibition. DAC features over 60 session on design methodologies and EDA tool developments, keynotes, panels, plus User Track presentations. A diverse worldwide community representing more than 1,000 organization attends each year, from system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities.

  • 2012 49th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers

  • 2011 48th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference is the world s leading technical conference and tradeshow on electronic design and design automation. DAC is where the IC Design and EDA ecosystem learns, networks, and does business.

  • 2010 47th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 200 of the leading electronics design suppliers.

  • 2009 46th ACM/EDAC/IEEE Design Automation Conference (DAC)

    DAC is the premier event for the electronic design community. DAC offers the industry s most prestigious technical conference in combination with the biggest exhibition, bringing together design, design automation and manufacturing market influencers.

  • 2008 45th ACM/EDAC/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier event for the design of electronic circuits and systems, and for EDA and silicon solutions. DAC features a wide array of technical presentations plus over 250 of the leading electronics design suppliers.

  • 2007 44th ACM/IEEE Design Automation Conference (DAC)

    The Design Automation Conference (DAC) is the premier Electronic Design Automation (EDA) and silicon solution event. DAC features over 50 technical sessions covering the latest in design methodologies and EDA tool developments and an Exhibition and Demo Suite area with over 250 of the leading EDA, silicon and IP Providers.

  • 2006 43rd ACM/IEEE Design Automation Conference (DAC)

  • 2005 42nd ACM/IEEE Design Automation Conference (DAC)

  • 2004 41st ACM/IEEE Design Automation Conference (DAC)

  • 2003 40th ACM/IEEE Design Automation Conference (DAC)

  • 2002 39th ACM/IEEE Design Automation Conference (DAC)

  • 2001 38th ACM/IEEE Design Automation Conference (DAC)

  • 2000 37th ACM/IEEE Design Automation Conference (DAC)

  • 1999 36th ACM/IEEE Design Automation Conference (DAC)

  • 1998 35th ACM/IEEE Design Automation Conference (DAC)

  • 1997 34th ACM/IEEE Design Automation Conference (DAC)

  • 1996 33rd ACM/IEEE Design Automation Conference (DAC)


More Conferences

Periodicals related to Stem cells

Back to Top

Antennas and Propagation, IEEE Transactions on

Experimental and theoretical advances in antennas including design and development, and in the propagation of electromagnetic waves including scattering, diffraction and interaction with continuous media; and applications pertinent to antennas and propagation, such as remote sensing, applied optics, and millimeter and submillimeter wave techniques.


Automation Science and Engineering, IEEE Transactions on

The IEEE Transactions on Automation Sciences and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. We welcome results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, ...


Biomedical Engineering, IEEE Reviews in

The IEEE Reviews in Biomedical Engineering will review the state-of-the-art and trends in the emerging field of biomedical engineering. This includes scholarly works, ranging from historic and modern development in biomedical engineering to the life sciences and medicine enabled by technologies covered by the various IEEE societies.


Biomedical Engineering, IEEE Transactions on

Broad coverage of concepts and methods of the physical and engineering sciences applied in biology and medicine, ranging from formalized mathematical theory through experimental science and technological development to practical clinical applications.


Communications Magazine, IEEE

IEEE Communications Magazine was the number three most-cited journal in telecommunications and the number eighteen cited journal in electrical and electronics engineering in 2004, according to the annual Journal Citation Report (2004 edition) published by the Institute for Scientific Information. Read more at http://www.ieee.org/products/citations.html. This magazine covers all areas of communications such as lightwave telecommunications, high-speed data communications, personal communications ...


More Periodicals

Most published Xplore authors for Stem cells

Back to Top

Xplore Articles related to Stem cells

Back to Top

One-step stem cell cluster culture process using hydrophilic tapered stencil mask

2010 International Symposium on Micro-NanoMechatronics and Human Science, 2010

This paper reports on new device for 3D cluster formation of stem cells under combinatorial seeding conditions - cell population and density. The device has an array of tapered holes of various sizes, and the surface is modified with hydrophilic polymer to prevent cell adhesion. Thus, the cells seeded onto the device aggregate in the areas defined by the holes. ...


Effect of hydroxyapatite particles on stem cell response in nanofiber scaffolds

Proceedings of the 2010 IEEE 36th Annual Northeast Bioengineering Conference (NEBEC), 2010

Rotator cuff tears are among the most common shoulder injuries that require surgery. High failure rates of biological graft-based repairs underscore the need for functional alternatives. Specifically, functional grafts must incorporate the gradient of mineralization from tendon to bone in order to be biomimetic. In this study, effects of varying concentrations of mineral content in aligned nanofiber scaffolds on human ...


Comparative proteomic analysis of neural stem cells between differentiating and undifferentiating to dopaminergic neuron

2007 IEEE/ICME International Conference on Complex Medical Engineering, 2007

The neural stem cells were induced by low-level dopamine (DA). We allowed cells 72 h of differentiation before protein extraction. The global proteins of neural stem cells and dopaminergic neurons were extracted. In this study, the protein from cell lysat was rudiment separated by SDS-PAGE, and the gel strip was cut into several portions. The protein in each portion is ...


In the Spotlight: Tissue Engineering

IEEE Reviews in Biomedical Engineering, 2013

This paper is based on tissue engineering. Here a scaffold created outside the body to provide key biophysical or chemical signals to stem cells or prime the body endogenously such that it is more hospitable to injected stem cells, it is clear that simply injecting naked stem cells may not yield their full potential.


An approach to ex vivo expansion of stem cells

Proceedings of the First Joint BMES/EMBS Conference. 1999 IEEE Engineering in Medicine and Biology 21st Annual Conference and the 1999 Annual Fall Meeting of the Biomedical Engineering Society (Cat. N, 1999

Presented paper describes experimental works within the development of a new bioreactor which is specialized on hematopoietic stem cells. Preceding experiments with static suspension cultures and feeder layer-supported cultures were used to find the optimal media consistence and culture conditions. Perfused cultures with reproducible courses of experiments were proved to obtain higher expansion rates. The process parameters and special optical ...


More Xplore Articles

Educational Resources on Stem cells

Back to Top

IEEE-USA E-Books

  • One-step stem cell cluster culture process using hydrophilic tapered stencil mask

    This paper reports on new device for 3D cluster formation of stem cells under combinatorial seeding conditions - cell population and density. The device has an array of tapered holes of various sizes, and the surface is modified with hydrophilic polymer to prevent cell adhesion. Thus, the cells seeded onto the device aggregate in the areas defined by the holes. By varying the shape of the holes, cluster cultures can be performed under different conditions at one time. The device is easily incorporated into conventional cluster culture protocols by just placing the device onto an arbitrary culture substrate. Combinatorial cluster formation of stem cells derived from pancreatic duct was successfully demonstrated on ultra low attachment surface and Matrigel. The device should be useful for one-step combinatorial analysis to find optimal cluster culture conditions for various types of cells, and the more, for mass production of standardized embryonic body (EB) necessary in tissue engineering research.

  • Effect of hydroxyapatite particles on stem cell response in nanofiber scaffolds

    Rotator cuff tears are among the most common shoulder injuries that require surgery. High failure rates of biological graft-based repairs underscore the need for functional alternatives. Specifically, functional grafts must incorporate the gradient of mineralization from tendon to bone in order to be biomimetic. In this study, effects of varying concentrations of mineral content in aligned nanofiber scaffolds on human mesenchymal stem cells (hMSC) are evaluated. It is hypothesized that mineral content will regulate cell response, matrix deposition, and integrin gene expression. hMSC were seeded on aligned nanofiber scaffolds of polylactide-co-glycolide with 0%, 10%, and 15% hydroxyapatite content, and were maintained in chondrogenic medium. Cell proliferation (n=5), collagen deposition (n=5), and gene expression (n=5) for Collagen X, Sox9, osteopontin, osteonectin, and osteocalcin were determined over 42 days. Cell number was found to differ between the non-mineralized and mineralized groups. Significant increase in collagen deposition over time was observed in mineralized scaffold groups, and the 15% group showing significantly higher deposition than the 0% group by day 42. Lower expressions of chondrocyte hyperotrophy marker Collagen X and chondrogenic marker Sox9 and maintained high expressions of osteogenic markers osteopontin, osteonectin, and osteocalcin suggest an osteogenic lineage for the stem cells. In conclusion, addition of HA particles influenced hMSC proliferation, matrix deposition, and may induce an osteogenic differentiation response from the stem cells.

  • Comparative proteomic analysis of neural stem cells between differentiating and undifferentiating to dopaminergic neuron

    The neural stem cells were induced by low-level dopamine (DA). We allowed cells 72 h of differentiation before protein extraction. The global proteins of neural stem cells and dopaminergic neurons were extracted. In this study, the protein from cell lysat was rudiment separated by SDS-PAGE, and the gel strip was cut into several portions. The protein in each portion is digested by trypsin, and then the peptides mixtures were analyzed by mass spectrometry (LC-MS/MS). 839 proteins in the neural stem cells and 718 proteins in the dopaminergic neuron were identified. The nestin protein was found in the NSCs and the Sodium-dependent dopamine transporter (DA transporter)(DAT) was found in the dopaminergic neuron which was induced by low level DA. The cytoskeletal proteins rearranged after the NSCs differentiated and regulating proteins changed a lot.

  • In the Spotlight: Tissue Engineering

    This paper is based on tissue engineering. Here a scaffold created outside the body to provide key biophysical or chemical signals to stem cells or prime the body endogenously such that it is more hospitable to injected stem cells, it is clear that simply injecting naked stem cells may not yield their full potential.

  • An approach to ex vivo expansion of stem cells

    Presented paper describes experimental works within the development of a new bioreactor which is specialized on hematopoietic stem cells. Preceding experiments with static suspension cultures and feeder layer-supported cultures were used to find the optimal media consistence and culture conditions. Perfused cultures with reproducible courses of experiments were proved to obtain higher expansion rates. The process parameters and special optical parameters were determined. The research on experimental setup is useful for further clinical applications.

  • Microelectronic channel bridge and signal regeneration of injured spinal cords

    We are searching for a way to generate neural function recovery by introducing an implantable microelectronic system. Prototypes of the so-called microelectronic neural-bridging systems have been realized in the form of integrated circuits. The integrated circuits were realized in a standard CMOS process. In a series of animal experiments, we have demonstrated that an interrupted spinal cord could be bridged and neural signals were regenerated. The idea of microelectronics channel bridging and signal regeneration of injured spinal cords was primarily demonstrated.

  • Sorting stem cells using a femtosecond laser inscribed biochip

    We present a microfabricated cell sorting mechanism, inscribed in fused silica using femtosecond laser pulses, aimed at separating embryonic stem cells from differentiated cells based on the dissimilarity in their cytoskeletal elasticity.

  • Comparison of texture features for human embryonic stem cells with bio-inspired multi-class support vector machine

    Determining the meaningful texture features for human embryonic stem cells (hESC) is important in the development of online hESC classification system. This paper proposes the use of novel support vector machine with bio-inspired one-against-all (OAA) multi-class structural and statistical Gabor descriptors for hESC classification. It investigates the statistical histogram information at four different orientations and two different window sizes of the Gabor filter. It demonstrates that statistical Gabor features are more accurate and reliable than a conventional histogram based features.

  • Independently controllable microwell array with fluidic multiplexer for mass production of embryonic bodies

    A palm-sized cell culture system “PASMA (Pressure Actuated Shapable Microwell Array)” has been developed for mass production of embryonic bodies (EBs) of human iPS cells. The key problem in increasing the number of microwells is the increase of the number of costly and large solenoid valves. In this report, we have introduced fluidic multiplexer circuits composed of pneumatically actuated normally-open valves and normally-closed valves. Thus, the number of microwells was increased from 100 to 256 despite decreasing the number of solenoid valves from 20 to 16. The results should accelerate the research and clinical application of PASMA for mass-production of high-quality EBs.

  • Stem Cell Proliferation and Differentiation through Capped Clay Nanotubes

    Stem cells can be coaxed to grow into new bone or new cartilage better and faster when given the right molecular cues [1, 2]. Depending on the target tissue, control over the physical, chemical and mechanical influences is key to directing cell behavior in three-dimensions, and, ultimately, as a method to grow tissues for regenerative medicine applications. We designed a hydrogel that provides control over local biomaterial properties and that permits guidance over the process of development leading to extracellular matrix and tissue development. Our hydrogel nanocomposite consisting of alginate or chitosan, and growth factors doped Halloysite Nanotubes (HNTs). Results demonstrate that HNT addition improved nanocomposite material properties and created a cell supportive environment. While the focus in this study was on osteoblast differentiation this approach may permit local control over the behavior of varied cell types and allow the engineering of complex tissues using a single stem cell source.



Standards related to Stem cells

Back to Top

No standards are currently tagged "Stem cells"


Jobs related to Stem cells

Back to Top